linux-kernel - [PATCH 1/7] scsi: hisi_sas: Feed back linkrate(max/min) when re-attached

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1537801594-207139-2-git-send-email-john.garry@huawei.com>
Date:   Mon, 24 Sep 2018 23:06:28 +0800
From:   John Garry <john.garry@...wei.com>
To:     <jejb@...ux.vnet.ibm.com>, <martin.petersen@...cle.com>
CC:     <linuxarm@...wei.com>, <linux-scsi@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        Luo Jiaxing <luojiaxing@...wei.com>,
        "John Garry" <john.garry@...wei.com>
Subject: [PATCH 1/7] scsi: hisi_sas: Feed back linkrate(max/min) when re-attached

From: Luo Jiaxing <luojiaxing@...wei.com>

At directly attached situation, if the user modifies the sysfs interface
of maximum_linkrate and minimum_linkrate to renegotiate the linkrate
between SAS controller and target, the value of both files mentioned above
should have change to user setting after renegotiate is over, but it remain
unchanged.

To fix this bug, maximum_linkrate and minimum_linkrate will be directly
fed back to relevant sas_phy structure.

Signed-off-by: Luo Jiaxing <luojiaxing@...wei.com>
Signed-off-by: John Garry <john.garry@...wei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index a4e2e6a..ba6fb535 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -904,6 +904,9 @@ static void hisi_sas_phy_set_linkrate(struct hisi_hba *hisi_hba, int phy_no,
 	_r.maximum_linkrate = max;
 	_r.minimum_linkrate = min;
 
+	sas_phy->phy->maximum_linkrate = max;
+	sas_phy->phy->minimum_linkrate = min;
+
 	hisi_hba->hw->phy_disable(hisi_hba, phy_no);
 	msleep(100);
 	hisi_hba->hw->phy_set_linkrate(hisi_hba, phy_no, &_r);
-- 
1.9.1