Message-Id: <20180924113859eucas1p160322f5844c771bc9c680d35de4877a3~XUxM0smXV0334103341eucas1p1s@eucas1p1.samsung.com>
Date:   Mon, 24 Sep 2018 13:38:57 +0200
From:   Marek Szyprowski <m.szyprowski@...sung.com>
To:     Janusz Krzysztofik <jmkrzyszt@...il.com>
Cc:     Linus Walleij <linus.walleij@...aro.org>,
        Jonathan Corbet <corbet@....net>,
        Miguel Ojeda Sandonis <miguel.ojeda.sandonis@...il.com>,
        Peter Korsgaard <peter.korsgaard@...co.com>,
        Peter Rosin <peda@...ntia.se>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Dominik Brodowski <linux@...inikbrodowski.net>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Kishon Vijay Abraham I <kishon@...com>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Michael Hennerich <Michael.Hennerich@...log.com>,
        Jonathan Cameron <jic23@...nel.org>,
        Hartmut Knaack <knaack.h@....de>,
        Peter Meerwald-Stadler <pmeerw@...erw.net>,
        Jiri Slaby <jslaby@...e.com>, Willy Tarreau <w@....eu>,
        Geert Uytterhoeven <geert@...ux-m68k.org>,
        Sebastien Bourdelin <sebastien.bourdelin@...oirfairelinux.com>,
        Lukas Wunner <lukas@...ner.de>,
        Rojhalat Ibrahim <imr@...chenk.de>,
        Russell King <rmk+kernel@...linux.org.uk>,
        Tony Lindgren <tony@...mide.com>,
        Yegor Yefremov <yegorslists@...glemail.com>,
        Uwe Kleine-König <u.kleine-koenig@...gutronix.de>,
        linux-doc@...r.kernel.org, linux-i2c@...r.kernel.org,
        linux-mmc@...r.kernel.org, netdev@...r.kernel.org,
        linux-iio@...r.kernel.org, devel@...verdev.osuosl.org,
        linux-serial@...r.kernel.org, linux-gpio@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Linux Samsung SOC <linux-samsung-soc@...r.kernel.org>
Subject: Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap
 processing path

Hi Janusz,

On 2018-09-24 13:08, Janusz Krzysztofik wrote:
> 2018-09-24 11:43 GMT+02:00, Marek Szyprowski <m.szyprowski@...sung.com>:
>> On 2018-09-24 01:53, Janusz Krzysztofik wrote:
>>> While investigating possible reasons of GPIO fast bitmap processing
>>> related boot hang on Samsung Snow Chromebook, reported by Marek
>>> Szyprowski (thanks!), I've discovered one coding bug, addressed by
>>> PATCH 1/2 of this series, and one potential regression introduced at
>>> design level of the solution, hopefully fixed by PATCH 2/2.  See
>>> commit messages for details.
>>>
>>> Janusz Krzysztofik (2):
>>>         gpiolib: Fix missing updates of bitmap index
>>>         gpiolib: Fix array members of same chip processed separately
>>>
>>> The fixes should resolve the boot hang observed by Marek, however the
>>> second change excludes that particular case from fast bitmap processing
>>> and restores the old behaviour.
>> I confirm, that the above 2 patches fixes boot issue on Samsung Snow
>> Chromebook with next-20180920.
>>
>> Tested-by: Marek Szyprowski <m.szyprowski@...sung.com>
>>
>>> Hence, it is possible still another
>>> issue which have had an influence on that boot hang exists in the code.
>>> In order to fully verify the fix, it would have to be tested on a
>>> platform where an array of GPIO descriptors is used which starts from
>>> at least two consecutive pins of one GPIO chip in hardware order,
>>> starting ftom 0, followed by one or more pins belonging to other
>>> chip(s).
>>>
>>> In order to verify if separate calls to .set() chip callback for each
>>> pin instead of one call to .set_multiple() is actually the reason of
>>> boot hang on Samsung Snow Chromebook, the affected driver -
>>> drivers/mmc/core/pwrseq_simple.c - would have to be temporarily
>>> modified for testing purposes so it calls gpiod_set_value() for each
>>> pin instead of gpiod_set_array_value() for all of them.  If that would
>>> also result in boot hang, we could be sure the issue was really the
>>> one addressed by the second fix.  Marek, could you please try to
>>> perform such test?
>> Yes, I've just tested next-20180920 only with the first patch from this
>> patchset and the mentioned change to drivers/mmc/core/pwrseq_simple.c.
>> It boots fine, so indeed the issue is in handling of arrays of gpios.
>>
>> Just to be sure I did it right, this is my change to the mentioned file:
> Yeah, that's what I had on mind.  However, I'd be more lucky if it didn't work
> for you.  Setting the pins sequentially, not simultaneously as before, was
> exactly what I hoped was the reason of the hang.
>
>> diff --git a/drivers/mmc/core/pwrseq_simple.c
>> b/drivers/mmc/core/pwrseq_simple.c
>> index 7f882a2bb872..9397dc1f2e38 100644
>> --- a/drivers/mmc/core/pwrseq_simple.c
>> +++ b/drivers/mmc/core/pwrseq_simple.c
>> @@ -38,16 +38,11 @@ static void mmc_pwrseq_simple_set_gpios_value(struct
>> mmc_pwrseq_simple *pwrseq,
>>                                                 int value)
>>    {
>>           struct gpio_descs *reset_gpios = pwrseq->reset_gpios;
>> +       int i;
>>
>> -       if (!IS_ERR(reset_gpios)) {
>> -               DECLARE_BITMAP(values, BITS_PER_TYPE(value));
>> -               int nvalues = reset_gpios->ndescs;
>> -
>> -               values[0] = value;
>> -
>> -               gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc,
>> -                                              reset_gpios->info, values);
>> -       }
>> +       if (!IS_ERR(reset_gpios))
>> +               for (i = 0; i < reset_gpios->ndescs; i++)
> The only difference from the behaviour when the hang was occurring is now
> the order the pins are manipulated.  Maybe that matters?
> Could you please retry the same with the order of pins reversed, either in
> the .dts file or here inside this for loop?

I've switched the order of pins in dts and next-20180920 + first patch + 
above
change also boots fine.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Powered by blists - more mailing lists