| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180924113116.190671490@linuxfoundation.org>
Date: Mon, 24 Sep 2018 13:51:32 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Corey Minyard <cminyard@...sta.com>,
Andrew Banman <abanman@....com>
Subject: [PATCH 4.18 106/235] ipmi: Move BT capabilities detection to the detect call
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Corey Minyard <cminyard@...sta.com>
commit c86ba91be75702c013bbf7379542920b6920e98f upstream.
The capabilities detection was being done as part of the normal
state machine, but it was possible for it to be running while
the upper layers of the IPMI driver were initializing the
device, resulting in error and failure to initialize.
Move the capabilities detection to the the detect function,
so it's done before anything else runs on the device. This also
simplifies the state machine and removes some code, as a bonus.
Signed-off-by: Corey Minyard <cminyard@...sta.com>
Reported-by: Andrew Banman <abanman@....com>
Tested-by: Andrew Banman <abanman@....com>
Cc: <stable@...r.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/char/ipmi/ipmi_bt_sm.c | 92 +++++++++++++++++++++--------------------
1 file changed, 48 insertions(+), 44 deletions(-)
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -59,8 +59,6 @@ enum bt_states {
BT_STATE_RESET3,
BT_STATE_RESTART,
BT_STATE_PRINTME,
- BT_STATE_CAPABILITIES_BEGIN,
- BT_STATE_CAPABILITIES_END,
BT_STATE_LONG_BUSY /* BT doesn't get hosed :-) */
};
@@ -86,7 +84,6 @@ struct si_sm_data {
int error_retries; /* end of "common" fields */
int nonzero_status; /* hung BMCs stay all 0 */
enum bt_states complete; /* to divert the state machine */
- int BT_CAP_outreqs;
long BT_CAP_req2rsp;
int BT_CAP_retries; /* Recommended retries */
};
@@ -137,8 +134,6 @@ static char *state2txt(unsigned char sta
case BT_STATE_RESET3: return("RESET3");
case BT_STATE_RESTART: return("RESTART");
case BT_STATE_LONG_BUSY: return("LONG_BUSY");
- case BT_STATE_CAPABILITIES_BEGIN: return("CAP_BEGIN");
- case BT_STATE_CAPABILITIES_END: return("CAP_END");
}
return("BAD STATE");
}
@@ -185,7 +180,6 @@ static unsigned int bt_init_data(struct
bt->complete = BT_STATE_IDLE; /* end here */
bt->BT_CAP_req2rsp = BT_NORMAL_TIMEOUT * USEC_PER_SEC;
bt->BT_CAP_retries = BT_NORMAL_RETRY_LIMIT;
- /* BT_CAP_outreqs == zero is a flag to read BT Capabilities */
return 3; /* We claim 3 bytes of space; ought to check SPMI table */
}
@@ -451,7 +445,7 @@ static enum si_sm_result error_recovery(
static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
{
- unsigned char status, BT_CAP[8];
+ unsigned char status;
static enum bt_states last_printed = BT_STATE_PRINTME;
int i;
@@ -504,12 +498,6 @@ static enum si_sm_result bt_event(struct
if (status & BT_H_BUSY) /* clear a leftover H_BUSY */
BT_CONTROL(BT_H_BUSY);
- bt->timeout = bt->BT_CAP_req2rsp;
-
- /* Read BT capabilities if it hasn't been done yet */
- if (!bt->BT_CAP_outreqs)
- BT_STATE_CHANGE(BT_STATE_CAPABILITIES_BEGIN,
- SI_SM_CALL_WITHOUT_DELAY);
BT_SI_SM_RETURN(SI_SM_IDLE);
case BT_STATE_XACTION_START:
@@ -614,37 +602,6 @@ static enum si_sm_result bt_event(struct
BT_STATE_CHANGE(BT_STATE_XACTION_START,
SI_SM_CALL_WITH_DELAY);
- /*
- * Get BT Capabilities, using timing of upper level state machine.
- * Set outreqs to prevent infinite loop on timeout.
- */
- case BT_STATE_CAPABILITIES_BEGIN:
- bt->BT_CAP_outreqs = 1;
- {
- unsigned char GetBT_CAP[] = { 0x18, 0x36 };
- bt->state = BT_STATE_IDLE;
- bt_start_transaction(bt, GetBT_CAP, sizeof(GetBT_CAP));
- }
- bt->complete = BT_STATE_CAPABILITIES_END;
- BT_STATE_CHANGE(BT_STATE_XACTION_START,
- SI_SM_CALL_WITH_DELAY);
-
- case BT_STATE_CAPABILITIES_END:
- i = bt_get_result(bt, BT_CAP, sizeof(BT_CAP));
- bt_init_data(bt, bt->io);
- if ((i == 8) && !BT_CAP[2]) {
- bt->BT_CAP_outreqs = BT_CAP[3];
- bt->BT_CAP_req2rsp = BT_CAP[6] * USEC_PER_SEC;
- bt->BT_CAP_retries = BT_CAP[7];
- } else
- printk(KERN_WARNING "IPMI BT: using default values\n");
- if (!bt->BT_CAP_outreqs)
- bt->BT_CAP_outreqs = 1;
- printk(KERN_WARNING "IPMI BT: req2rsp=%ld secs retries=%d\n",
- bt->BT_CAP_req2rsp / USEC_PER_SEC, bt->BT_CAP_retries);
- bt->timeout = bt->BT_CAP_req2rsp;
- return SI_SM_CALL_WITHOUT_DELAY;
-
default: /* should never occur */
return error_recovery(bt,
status,
@@ -655,6 +612,11 @@ static enum si_sm_result bt_event(struct
static int bt_detect(struct si_sm_data *bt)
{
+ unsigned char GetBT_CAP[] = { 0x18, 0x36 };
+ unsigned char BT_CAP[8];
+ enum si_sm_result smi_result;
+ int rv;
+
/*
* It's impossible for the BT status and interrupt registers to be
* all 1's, (assuming a properly functioning, self-initialized BMC)
@@ -665,6 +627,48 @@ static int bt_detect(struct si_sm_data *
if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF))
return 1;
reset_flags(bt);
+
+ /*
+ * Try getting the BT capabilities here.
+ */
+ rv = bt_start_transaction(bt, GetBT_CAP, sizeof(GetBT_CAP));
+ if (rv) {
+ dev_warn(bt->io->dev,
+ "Can't start capabilities transaction: %d\n", rv);
+ goto out_no_bt_cap;
+ }
+
+ smi_result = SI_SM_CALL_WITHOUT_DELAY;
+ for (;;) {
+ if (smi_result == SI_SM_CALL_WITH_DELAY ||
+ smi_result == SI_SM_CALL_WITH_TICK_DELAY) {
+ schedule_timeout_uninterruptible(1);
+ smi_result = bt_event(bt, jiffies_to_usecs(1));
+ } else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
+ smi_result = bt_event(bt, 0);
+ } else
+ break;
+ }
+
+ rv = bt_get_result(bt, BT_CAP, sizeof(BT_CAP));
+ bt_init_data(bt, bt->io);
+ if (rv < 8) {
+ dev_warn(bt->io->dev, "bt cap response too short: %d\n", rv);
+ goto out_no_bt_cap;
+ }
+
+ if (BT_CAP[2]) {
+ dev_warn(bt->io->dev, "Error fetching bt cap: %x\n", BT_CAP[2]);
+out_no_bt_cap:
+ dev_warn(bt->io->dev, "using default values\n");
+ } else {
+ bt->BT_CAP_req2rsp = BT_CAP[6] * USEC_PER_SEC;
+ bt->BT_CAP_retries = BT_CAP[7];
+ }
+
+ dev_info(bt->io->dev, "req2rsp=%ld secs retries=%d\n",
+ bt->BT_CAP_req2rsp / USEC_PER_SEC, bt->BT_CAP_retries);
+
return 0;
}
Powered by blists - more mailing lists