[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20180926144846.GE12980@ulmo>
Date: Wed, 26 Sep 2018 16:48:46 +0200
From: Thierry Reding <thierry.reding@...il.com>
To: Marcel Ziswiler <marcel@...wiler.com>
Cc: devicetree@...r.kernel.org, linux-tegra@...r.kernel.org,
linux-kernel@...r.kernel.org,
Jonathan Hunter <jonathanh@...dia.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Subject: Re: [PATCH v2 00/34] ARM: dts: tegra: colibri_t30: major revamp
On Sat, Sep 01, 2018 at 10:12:14AM +0200, Marcel Ziswiler wrote:
> This series is a major overhaul for the Toradex Colibri T30 system on
> module.
>
> Changes in v2:
> - Also move serial UART "nvidia,tegra30-hsuart" compatible to module
> level device trees.
> - Also replace underscores in node names with dashes.
> - Also replace underscores in UART annotations with dashes.
> - When running some more tests I realized that the reg-addr should
> really be 0x3f. Fix this.
> - Get rid of fake clocks simple bus as suggested by Rob.
> - Drop "[PATCH 01/26] ARM: tegra: colibri_t30: enable broken-hpi on
> emmc" which should already be handled by the broken-hpi quirk as
> pointed out by Dmitry. If I would find more eMMC parts which exhibit
> the issue I will add them to the quirk as a separate patch.
> - New patch as suggested by Rob.
> - New patch.
>
> Marcel Ziswiler (34):
> ARM: tegra: colibri_t30: add local-mac-address property
> ARM: tegra: colibri_t30: reorder host1x/hdmi properties
> ARM: tegra: colibri_t30: regulator clean-up
> ARM: tegra: colibri_t30: add missing regulators
> ARM: tegra: colibri_t30: annotate uarts and move compatible to board
> ARM: tegra: colibri_t30: white-space clean-up
> ARM: tegra: colibri_t30: move dr_mode property from phy to controller
> ARM: tegra: colibri_t30: reorder backlight properties
> ARM: tegra: colibri_t30: drop pwmleds
> ARM: tegra: colibri_t30: pinmux clean-up
> ARM: tegra: colibri_t30: add missing pinmux
> ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811
> ARM: tegra: colibri_t30: further lm95245 temperature sensor annotation
> ARM: tegra: colibri_t30: add i2c-thermtrip
> ARM: tegra: colibri_t30: add proper emmc vmmc and vqmmc supplies
> ARM: tegra: colibri_t30: enable emmc ddr52 mode
> ARM: tegra: colibri_t30: get rid of fake clocks simple bus
> ARM: tegra: colibri_t30: line break long compatible property line
> ARM: tegra: colibri_t30: move input include to carrier board
> ARM: tegra: colibri_t30: remove unused nvidia,is-wired property
> ARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip
> ARM: tegra: colibri_t30: enable hda over hdmi
> ARM: tegra: colibri_t30: annotate sd card detect
> ARM: tegra: colibri_t30: annotate ehci instance 1
> ARM: tegra: colibri_t30: update compatibility comment
> ARM: tegra: colibri_t30: drop module level model and compatible
> ARM: tegra: colibri_t30: drop obsolete spidev node
> ARM: tegra: colibri_t30: rename hdmiddc to hdmi_ddc
> ARM: tegra: colibri_t30: rename tps65911@2d, stmpe811@41 and
> tps62362@60
> ARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity
> ARM: tegra: colibri_t30: remove unused mcp2515 can0 label
> ARM: tegra: colibri_t30: add mcp2515 vdd and xceiver supplies
> ARM: tegra: colibri_t30: annotate unused i2c busses
> ARM: tegra: colibri_t30: annotate power I2C being on-module
>
> arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 130 ++---
> arch/arm/boot/dts/tegra30-colibri.dtsi | 780 +++++++++++++++++++++-----
> 2 files changed, 706 insertions(+), 204 deletions(-)
Applied, thanks.
Thierry
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists