| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 27 Sep 2018 09:10:05 +0800
From: Baolin Wang <baolin.wang@...aro.org>
To: Sebastian Reichel <sre@...nel.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Linux PM list <linux-pm@...r.kernel.org>,
DTML <devicetree@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>, yuanjiang.yu@...soc.com,
Mark Brown <broonie@...nel.org>,
Craig Tatlor <ctatlor97@...il.com>,
Linus Walleij <linus.walleij@...aro.org>
Subject: Re: [PATCH v2 2/4] power: supply: core: Introduce properties to
present the battery OCV table
On 26 September 2018 at 21:51, Sebastian Reichel <sre@...nel.org> wrote:
> Hi,
>
> On Wed, Sep 26, 2018 at 10:59:12AM +0800, Baolin Wang wrote:
>> Some battery driver will use the open circuit voltage (OCV) value to look
>> up the corresponding battery capacity percent in one certain degree Celsius.
>> Thus this patch provides some battery properties to present the OCV table
>> temperatures and OCV capacity table values.
>>
>> Suggested-by: Sebastian Reichel <sre@...nel.org>
>> Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
>> ---
>> Changes from v1:
>> - New patch in v2.
>> ---
>> .../devicetree/bindings/power/supply/battery.txt | 14 +++++
>> drivers/power/supply/power_supply_core.c | 63 +++++++++++++++++++-
>> include/linux/power_supply.h | 11 ++++
>> 3 files changed, 87 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt
>> index 25b9d2e..ac2b303 100644
>> --- a/Documentation/devicetree/bindings/power/supply/battery.txt
>> +++ b/Documentation/devicetree/bindings/power/supply/battery.txt
>> @@ -23,6 +23,16 @@ Optional Properties:
>> - constant-charge-current-max-microamp: maximum constant input current
>> - constant-charge-voltage-max-microvolt: maximum constant input voltage
>> - internal-resistance-micro-ohms: battery internal resistance
>> + - ocv-capacity-table-0: An array providing the battery capacity percent
>> + with corresponding open circuit voltage (OCV) of the battery, which
>> + is used to look up battery capacity according to current OCV value.
>> + - ocv-capacity-table-1: Same as ocv-capacity-table-0
>> + ......
>> + - ocv-capacity-table-n: Same as ocv-capacity-table-0
>> + - ocv-capacity-table-temperatures: An array containing the temperature
>> + in degree Celsius, for each of the battery capacity lookup table.
>> + The first temperature value specifies the OCV table 0, and the second
>> + temperature value specifies the OCV table 1, and so on.
>>
>> Battery properties are named, where possible, for the corresponding
>> elements in enum power_supply_property, defined in
>> @@ -44,6 +54,10 @@ Example:
>> constant-charge-current-max-microamp = <900000>;
>> constant-charge-voltage-max-microvolt = <4200000>;
>> internal-resistance-micro-ohms = <250000>;
>> + ocv-capacity-table-temperatures = <(-10) 0 10>;
>> + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...;
>> + ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...;
>> + ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...;
>> };
>>
>> charger: charger@11 {
>> diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
>> index 9f3452f..151ff03 100644
>> --- a/drivers/power/supply/power_supply_core.c
>> +++ b/drivers/power/supply/power_supply_core.c
>> @@ -570,7 +570,7 @@ int power_supply_get_battery_info(struct power_supply *psy,
>> {
>> struct device_node *battery_np;
>> const char *value;
>> - int err;
>> + int err, len, index;
>>
>> info->energy_full_design_uwh = -EINVAL;
>> info->charge_full_design_uah = -EINVAL;
>> @@ -581,6 +581,12 @@ int power_supply_get_battery_info(struct power_supply *psy,
>> info->constant_charge_voltage_max_uv = -EINVAL;
>> info->internal_resistance_uohm = -EINVAL;
>>
>> + for (index = 0; index < POWER_SUPPLY_OCV_TEMP_MAX; index++) {
>> + info->ocv_table[index] = NULL;
>> + info->ocv_temp[index] = -EINVAL;
>> + info->ocv_table_size[index] = -EINVAL;
>> + }
>> +
>> if (!psy->of_node) {
>> dev_warn(&psy->dev, "%s currently only supports devicetree\n",
>> __func__);
>> @@ -620,10 +626,65 @@ int power_supply_get_battery_info(struct power_supply *psy,
>> of_property_read_u32(battery_np, "internal-resistance-micro-ohms",
>> &info->internal_resistance_uohm);
>>
>> + len = of_property_count_u32_elems(battery_np,
>> + "ocv-capacity-table-temperatures");
>> + if (len < 0 && len != -EINVAL) {
>> + return len;
>> + } else if (len > POWER_SUPPLY_OCV_TEMP_MAX) {
>> + dev_err(&psy->dev, "Too many temperature values\n");
>> + return -EINVAL;
>> + } else if (len > 0) {
>> + of_property_read_u32_array(battery_np,
>> + "ocv-capacity-table-temperatures",
>> + info->ocv_temp, len);
>> + }
>> +
>> + for (index = 0; index < len; index++) {
>> + struct power_supply_battery_ocv_table *table;
>> + char *propname;
>> + const __be32 *list;
>> + int i, tab_len, size;
>> +
>> + propname = kasprintf(GFP_KERNEL, "ocv-capacity-table-%d", index);
>> + list = of_get_property(battery_np, propname, &size);
>> + kfree(propname);
>> + if (!list || !size) {
>> + dev_err(&psy->dev, "failed to get ocv capacity table\n");
>
> I think it's better to replace "ocv capacity table" with %s / propname.
Yes.
>
>> + power_supply_put_battery_info(psy, info);
>> + return -EINVAL;
>> + }
>> +
>> + tab_len = size / sizeof(*table);
>
> I think this should be
>
> tab_len = size / (2 * sizeof(__be32));
>
> which decouples DT memory layout from kernel memory layout.
Sure.
>
>> + info->ocv_table_size[index] = tab_len;
>> +
>> + table = info->ocv_table[index] = devm_kzalloc(&psy->dev,
>> + tab_len * sizeof(*table),
>> + GFP_KERNEL);
>> + if (!info->ocv_table[index]) {
>> + power_supply_put_battery_info(psy, info);
>> + return -ENOMEM;
>> + }
>> +
>> + for (i = 0; i < tab_len; i++) {
>> + table[i].ocv = be32_to_cpu(*list++);
>> + table[i].capacity = be32_to_cpu(*list++);
>> + }
>> + }
>> +
>> return 0;
>> }
>> EXPORT_SYMBOL_GPL(power_supply_get_battery_info);
>>
>> +void power_supply_put_battery_info(struct power_supply *psy,
>> + struct power_supply_battery_info *info)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < POWER_SUPPLY_OCV_TEMP_MAX; i++)
>> + kfree(info->ocv_table[i]);
>> +}
>> +EXPORT_SYMBOL_GPL(power_supply_put_battery_info);
>> +
>> int power_supply_get_property(struct power_supply *psy,
>> enum power_supply_property psp,
>> union power_supply_propval *val)
>> diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
>> index 019452d..b0a2768 100644
>> --- a/include/linux/power_supply.h
>> +++ b/include/linux/power_supply.h
>> @@ -309,6 +309,12 @@ struct power_supply_info {
>> int use_for_apm;
>> };
>>
>> +struct power_supply_battery_ocv_table {
>> + int ocv; /* microVolts */
>> + int capacity; /* percent */
>> +};
>> +
>> +#define POWER_SUPPLY_OCV_TEMP_MAX 20
>> /*
>> * This is the recommended struct to manage static battery parameters,
>> * populated by power_supply_get_battery_info(). Most platform drivers should
>> @@ -327,6 +333,9 @@ struct power_supply_battery_info {
>> int constant_charge_current_max_ua; /* microAmps */
>> int constant_charge_voltage_max_uv; /* microVolts */
>> int internal_resistance_uohm; /* microOhms */
>> + int ocv_temp[POWER_SUPPLY_OCV_TEMP_MAX]; /* celsius */
>> + struct power_supply_battery_ocv_table *ocv_table[POWER_SUPPLY_OCV_TEMP_MAX];
>> + int ocv_table_size[POWER_SUPPLY_OCV_TEMP_MAX];
>> };
>>
>> extern struct atomic_notifier_head power_supply_notifier;
>> @@ -350,6 +359,8 @@ extern struct power_supply *devm_power_supply_get_by_phandle(
>>
>> extern int power_supply_get_battery_info(struct power_supply *psy,
>> struct power_supply_battery_info *info);
>> +extern void power_supply_put_battery_info(struct power_supply *psy,
>> + struct power_supply_battery_info *info);
>> extern void power_supply_changed(struct power_supply *psy);
>> extern int power_supply_am_i_supplied(struct power_supply *psy);
>> extern int power_supply_set_input_current_limit_from_supplier(
>
> Looks good to me. Technically this can result in existing users of
> power_supply_get_battery_info leaking memory, if they have an OCV
> table in DT.
Fortunately existing users did not have an OCV table. Moreover once
this patch merged, I will send patches to add
power_supply_put_battery_info() for existing users of battery info.
--
Baolin Wang
Best Regards
Powered by blists - more mailing lists