linux-kernel - [RESEND PATCH v2 2/3] video: ssd1307fb: Do not hard code active-low reset sequence

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1538040281-21319-2-git-send-email-michal.vokac@ysoft.com>
Date:   Thu, 27 Sep 2018 11:24:40 +0200
From:   Michal Vokáč <michal.vokac@...ft.com>
To:     Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Shawn Guo <shawnguo@...nel.org>
Cc:     Fabio Estevam <fabio.estevam@....com>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-fbdev@...r.kernel.org,
        Michal Vokáč <michal.vokac@...ft.com>
Subject: [RESEND PATCH v2 2/3] video: ssd1307fb: Do not hard code active-low reset sequence

The SSD130x OLED display reset signal is active low. Now the reset
sequence is implemented in such a way that users are forced to
define reset-gpios as GPIO_ACTIVE_HIGH in DT to make the reset work.

Do not hard code the active-low sequence into the driver but instead
allow the user to specify the gpio as GPIO_ACTIVE_LOW to reflect
the real world.

Signed-off-by: Michal Vokáč <michal.vokac@...ft.com>
---
v2 changes: Split the DT changes into separate patch.

 drivers/video/fbdev/ssd1307fb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index e7ae135..7b5bc42 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -728,10 +728,10 @@ static int ssd1307fb_probe(struct i2c_client *client,
 
 	if (par->reset) {
 		/* Reset the screen */
-		gpiod_set_value_cansleep(par->reset, 0);
-		udelay(4);
 		gpiod_set_value_cansleep(par->reset, 1);
 		udelay(4);
+		gpiod_set_value_cansleep(par->reset, 0);
+		udelay(4);
 	}
 
 	if (par->vbat_reg) {
-- 
2.1.4