[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180927114850.24565-13-jagan@amarulasolutions.com>
Date: Thu, 27 Sep 2018 17:18:50 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>, Icenowy Zheng <icenowy@...c.io>,
Jernej Skrabec <jernej.skrabec@...l.net>,
Vasily Khoruzhick <anarsoul@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
David Airlie <airlied@...ux.ie>,
dri-devel@...ts.freedesktop.org,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, linux-clk@...r.kernel.org,
Michael Trimarchi <michael@...rulasolutions.com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Cc: Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH 12/12] arm64: dts: allwinner: bananapi-m64: Bananapi S070WV20-CT16 DSI panel
This patch add support for Bananapi S070WV20-CT16 DSI panel to
BPI-M64 board.
DSI panel connected via board DSI port with,
- DC1SW as AVDD supply
- DCDC1 as DVDD supply
- PD6 gpio for reset pin
- PD5 gpio for backlight enable pin
- PD7 gpio for backlight vdd supply
Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
.../dts/allwinner/sun50i-a64-bananapi-m64.dts | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index ef1c90401bb2..c0be949be68d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -45,6 +45,7 @@
#include "sun50i-a64.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "BananaPi-M64";
@@ -56,6 +57,24 @@
serial1 = &uart1;
};
+ vdd_bl: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "bl-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
+ enable-active-high;
+ };
+
+ backlight_dsi: backlight-dsi {
+ compatible = "pwm-backlight";
+ pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <2>;
+ enable-gpios = <&pio 3 5 GPIO_ACTIVE_HIGH>; /* PD5 */
+ power-supply = <&vdd_bl>;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -101,6 +120,23 @@
status = "okay";
};
+&dphy {
+ status = "okay";
+};
+
+&dsi {
+ status = "okay";
+
+ panel@0 {
+ compatible = "bananapi,s070wv20-ct16-dsi";
+ reg = <0>;
+ avdd-supply = <®_dc1sw>;
+ dvdd-supply = <®_dldo1>;
+ reset-gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+ backlight = <&backlight_dsi>;
+ };
+};
+
&ehci0 {
status = "okay";
};
@@ -193,6 +229,12 @@
status = "okay";
};
+&r_pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_pwm_pin>;
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
--
2.18.0.321.gffc6fa0e3
Powered by blists - more mailing lists