| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <8d77e9b1f4e71f84e7f7795adfaa74adfaf4ab01.1538058840.git.ren_guo@c-sky.com>
Date: Fri, 28 Sep 2018 08:51:21 +0800
From: Guo Ren <ren_guo@...ky.com>
To: akpm@...ux-foundation.org, arnd@...db.de,
daniel.lezcano@...aro.org, davem@...emloft.net,
gregkh@...uxfoundation.org, jason@...edaemon.net,
marc.zyngier@....com, mark.rutland@....com,
mchehab+samsung@...nel.org, peterz@...radead.org, robh@...nel.org,
robh+dt@...nel.org, tglx@...utronix.de
Cc: linux-kernel@...r.kernel.org, linux-arch@...r.kernel.org,
devicetree@...r.kernel.org, green.hu@...il.com,
Guo Ren <ren_guo@...ky.com>
Subject: [PATCH V6 24/33] clocksource: add C-SKY SMP timer
This timer is used by SMP system and use mfcr/mtcr instruction
to access the regs.
Changelog:
- Remove #define CPUHP_AP_CSKY_TIMER_STARTING
- Add CPUHP_AP_CSKY_TIMER_STARTING in cpuhotplug.h
- Support csky mp timer alpha version.
- Just use low-counter with 32bit width as clocksource.
- Coding convention with upstream feed-back.
Signed-off-by: Guo Ren <ren_guo@...ky.com>
---
drivers/clocksource/Kconfig | 8 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/csky_mptimer.c | 176 +++++++++++++++++++++++++++++++++++++
include/linux/cpuhotplug.h | 1 +
4 files changed, 186 insertions(+)
create mode 100644 drivers/clocksource/csky_mptimer.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index a11f4ba..a28043f 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -620,4 +620,12 @@ config RISCV_TIMER
is accessed via both the SBI and the rdcycle instruction. This is
required for all RISC-V systems.
+config CSKY_MPTIMER
+ bool "C-SKY Multi Processor Timer"
+ depends on CSKY
+ select TIMER_OF
+ help
+ Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP
+ system.
+
endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index db51b24..848c676 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -79,3 +79,4 @@ obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
obj-$(CONFIG_X86_NUMACHIP) += numachip.o
obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o
obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o
+obj-$(CONFIG_CSKY_MPTIMER) += csky_mptimer.o
diff --git a/drivers/clocksource/csky_mptimer.c b/drivers/clocksource/csky_mptimer.c
new file mode 100644
index 0000000..9dc3cfb
--- /dev/null
+++ b/drivers/clocksource/csky_mptimer.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+#include <linux/cpu.h>
+#include <asm/reg_ops.h>
+
+#include "timer-of.h"
+
+#define PTIM_CCVR "cr<3, 14>"
+#define PTIM_CTLR "cr<0, 14>"
+#define PTIM_LVR "cr<6, 14>"
+#define PTIM_TSR "cr<1, 14>"
+
+static int csky_mptimer_set_next_event(unsigned long delta, struct clock_event_device *ce)
+{
+ mtcr(PTIM_LVR, delta);
+
+ return 0;
+}
+
+static int csky_mptimer_shutdown(struct clock_event_device *ce)
+{
+ mtcr(PTIM_CTLR, 0);
+
+ return 0;
+}
+
+static int csky_mptimer_oneshot(struct clock_event_device *ce)
+{
+ mtcr(PTIM_CTLR, 1);
+
+ return 0;
+}
+
+static int csky_mptimer_oneshot_stopped(struct clock_event_device *ce)
+{
+ mtcr(PTIM_CTLR, 0);
+
+ return 0;
+}
+
+static DEFINE_PER_CPU(struct timer_of, csky_to) = {
+ .flags = TIMER_OF_CLOCK,
+ .clkevt = {
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_PERCPU |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = csky_mptimer_shutdown,
+ .set_state_oneshot = csky_mptimer_oneshot,
+ .set_state_oneshot_stopped = csky_mptimer_oneshot_stopped,
+ .set_next_event = csky_mptimer_set_next_event,
+ },
+ .of_irq = {
+ .flags = IRQF_TIMER,
+ .percpu = 1,
+ },
+};
+
+static irqreturn_t timer_interrupt(int irq, void *dev)
+{
+ struct timer_of *to = this_cpu_ptr(&csky_to);
+
+ mtcr(PTIM_TSR, 0);
+
+ to->clkevt.event_handler(&to->clkevt);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * clock event for percpu
+ */
+static int csky_mptimer_starting_cpu(unsigned int cpu)
+{
+ struct timer_of *to = per_cpu_ptr(&csky_to, cpu);
+
+ to->clkevt.cpumask = cpumask_of(cpu);
+
+ clockevents_config_and_register(&to->clkevt, timer_of_rate(to), 2, ULONG_MAX);
+
+ enable_percpu_irq(timer_of_irq(to), 0);
+
+ return 0;
+}
+
+static int csky_mptimer_dying_cpu(unsigned int cpu)
+{
+ struct timer_of *to = per_cpu_ptr(&csky_to, cpu);
+
+ disable_percpu_irq(timer_of_irq(to));
+
+ return 0;
+}
+
+/*
+ * clock source
+ */
+static u64 sched_clock_read(void)
+{
+ return (u64) mfcr(PTIM_CCVR);
+}
+
+static u64 clksrc_read(struct clocksource *c)
+{
+ return (u64) mfcr(PTIM_CCVR);
+}
+
+struct clocksource csky_clocksource = {
+ .name = "csky",
+ .rating = 400,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .read = clksrc_read,
+};
+
+static int __init csky_mptimer_init(struct device_node *np)
+{
+ int ret, cpu;
+ struct timer_of *to;
+ int rate = 0;
+ int irq = 0;
+
+ /*
+ * Csky_mptimer is designed for C-SKY SMP multi-processors and
+ * every core has it's own private irq and regs for clkevt and
+ * clksrc.
+ *
+ * The regs is accessed by cpu instruction: mfcr/mtcr instead of
+ * mmio map style. So we needn't mmio-address in dts, but we still
+ * need to give clk and irq number.
+ *
+ * We use private irq for the mptimer and irq number is the same
+ * for every core. So we use request_percpu_irq() in timer_of_init.
+ */
+
+ for_each_possible_cpu(cpu) {
+ to = per_cpu_ptr(&csky_to, cpu);
+
+ if (cpu == 0) {
+ to->flags |= TIMER_OF_IRQ;
+ to->of_irq.handler = timer_interrupt;
+
+ ret = timer_of_init(np, to);
+ if (ret)
+ return ret;
+
+ rate = timer_of_rate(to);
+ irq = to->of_irq.irq;
+ } else {
+ ret = timer_of_init(np, to);
+ if (ret)
+ return ret;
+
+ to->of_clk.rate = rate;
+ to->of_irq.irq = irq;
+ }
+ }
+
+ ret = cpuhp_setup_state(CPUHP_AP_CSKY_TIMER_STARTING,
+ "clockevents/csky/timer:starting",
+ csky_mptimer_starting_cpu,
+ csky_mptimer_dying_cpu);
+ if (ret) {
+ pr_err("%s: Failed to cpuhp_setup_state.\n", __func__);
+ return ret;
+ }
+
+ clocksource_register_hz(&csky_clocksource, rate);
+ sched_clock_register(sched_clock_read, 32, rate);
+
+ return 0;
+}
+TIMER_OF_DECLARE(csky_mptimer, "csky,mptimer", csky_mptimer_init);
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index caf40ad..e0cd2ba 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -126,6 +126,7 @@ enum cpuhp_state {
CPUHP_AP_MIPS_GIC_TIMER_STARTING,
CPUHP_AP_ARC_TIMER_STARTING,
CPUHP_AP_RISCV_TIMER_STARTING,
+ CPUHP_AP_CSKY_TIMER_STARTING,
CPUHP_AP_KVM_STARTING,
CPUHP_AP_KVM_ARM_VGIC_INIT_STARTING,
CPUHP_AP_KVM_ARM_VGIC_STARTING,
--
2.7.4
Powered by blists - more mailing lists