linux-kernel - Re: [PATCH v2 1/4] spi: spi-mem: Add the spi_set_xfer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180930124008.365831bf@bbrezillon>
Date:   Sun, 30 Sep 2018 12:40:08 +0200
From:   Boris Brezillon <boris.brezillon@...tlin.com>
To:     Chuanhua Han <chuanhua.han@....com>
Cc:     "broonie@...nel.org" <broonie@...nel.org>,
        "linux-spi@...r.kernel.org" <linux-spi@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "eha@...f.com" <eha@...f.com>
Subject: Re: [PATCH v2 1/4] spi: spi-mem: Add the spi_set_xfer_bpw function

On Sun, 30 Sep 2018 10:18:18 +0000
Chuanhua Han <chuanhua.han@....com> wrote:

> > -----Original Message-----
> > From: Boris Brezillon <boris.brezillon@...tlin.com>
> > Sent: 2018年9月30日 18:04
> > To: Chuanhua Han <chuanhua.han@....com>
> > Cc: broonie@...nel.org; linux-spi@...r.kernel.org;
> > linux-kernel@...r.kernel.org; eha@...f.com
> > Subject: Re: [PATCH v2 1/4] spi: spi-mem: Add the spi_set_xfer_bpw function
> > 
> > Hi Chuanhua,
> > 
> > On Sun, 30 Sep 2018 17:25:32 +0800
> > Chuanhua Han <chuanhua.han@....com> wrote:
> >   
> > > Before we add this spi_transfer to the spi_message chain table, we
> > > need bits_per_word_mask based on spi_control to set the bits_per_word
> > > of this spi_transfer.  
> > 
> > Let's make it clearer: this is wrong. The spi-mem protocol is just using bytes,
> > not custom size words. Fix the fsl-dspi driver if needed, but don't try to adjust
> > xfer->bits_per_word in spi-mem.c, because this is inappropriate.  
> The value of bits_per_word is only known before the spi_message_add_tail function is called,

No, it's not. It's known from the beginning, and spi_setup() defaults
to 8 when spidev->bits_per_word is 0, which is exactly what we
want. Then, when you send a message through, spi_sync(), spi_validate()
makes sure that each transfer in the message has a
xfer->bits_per_word != 0 and when that's not the case, it sets it to
spi->bits_per_word [2].

Really, there's nothing to fix in spi-mem.c, because it's already doing
the right thing (leaving ->bits_per_word to 0 so that it's set to
spi->bits_per_word, which should be 8). Maybe we have a bug somewhere
else though.

[1]https://elixir.bootlin.com/linux/v4.19-rc5/source/drivers/spi/spi.c#L2803
[2]https://elixir.bootlin.com/linux/v4.19-rc5/source/drivers/spi/spi.c#L2869