linux-kernel - RE: [PATCH v2 1/4] spi: spi-mem: Add the spi_set_xfer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <AM0PR04MB4353635C85F0D744D090A14C97EE0@AM0PR04MB4353.eurprd04.prod.outlook.com>
Date:   Sun, 30 Sep 2018 10:18:18 +0000
From:   Chuanhua Han <chuanhua.han@....com>
To:     Boris Brezillon <boris.brezillon@...tlin.com>
CC:     "broonie@...nel.org" <broonie@...nel.org>,
        "linux-spi@...r.kernel.org" <linux-spi@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "eha@...f.com" <eha@...f.com>
Subject: RE: [PATCH v2 1/4] spi: spi-mem: Add the spi_set_xfer_bpw function



> -----Original Message-----
> From: Boris Brezillon <boris.brezillon@...tlin.com>
> Sent: 2018年9月30日 18:04
> To: Chuanhua Han <chuanhua.han@....com>
> Cc: broonie@...nel.org; linux-spi@...r.kernel.org;
> linux-kernel@...r.kernel.org; eha@...f.com
> Subject: Re: [PATCH v2 1/4] spi: spi-mem: Add the spi_set_xfer_bpw function
> 
> Hi Chuanhua,
> 
> On Sun, 30 Sep 2018 17:25:32 +0800
> Chuanhua Han <chuanhua.han@....com> wrote:
> 
> > Before we add this spi_transfer to the spi_message chain table, we
> > need bits_per_word_mask based on spi_control to set the bits_per_word
> > of this spi_transfer.
> 
> Let's make it clearer: this is wrong. The spi-mem protocol is just using bytes,
> not custom size words. Fix the fsl-dspi driver if needed, but don't try to adjust
> xfer->bits_per_word in spi-mem.c, because this is inappropriate.
The value of bits_per_word is only known before the spi_message_add_tail function is called, 
and dspi controllers only decide which mode (8bit, 16bit, or 32bit) to use for data
transfer based on the value of the transfer->bits_per_word.

> 
> Regards,
> 
> Boris
> 
> >
> > Signed-off-by: Chuanhua Han <chuanhua.han@....com>
> > ---
> > Changes in v2:
> >  -The original patch is divided into multiple patches(the original
> > patch theme is "spi: spi-fsl-dspi: Fix support for XSPI transport
> > mode"),one of which is segmented.
> >
> >  drivers/spi/spi-mem.c | 39
> +++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 39 insertions(+)
> >
> > diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index
> > eb72dba71d83..717e711c0952 100644
> > --- a/drivers/spi/spi-mem.c
> > +++ b/drivers/spi/spi-mem.c
> > @@ -175,6 +175,41 @@ bool spi_mem_supports_op(struct spi_mem
> *mem,
> > const struct spi_mem_op *op)  }
> > EXPORT_SYMBOL_GPL(spi_mem_supports_op);
> >
> > +/**
> > + * spi_set_xfer_bpw() - Set the bits_per_word for each transfer based on
> > + *			the bits_per_word_mask of the spi controller
> > + * @ctrl: the spi controller
> > + * @xfer: the spi transfer
> > + *
> > + * This function sets the bits_per_word for each transfer based on
> > +the spi
> > + * controller's bits_per_word_mask to improve the efficiency of spi
> transport.
> > + *
> > + * Return: 0 in case of success, a negative error code otherwise.
> > + */
> > +int spi_set_xfer_bpw(struct spi_controller *ctlr, struct spi_transfer
> > +*xfer) {
> > +	if (!ctlr || !xfer) {
> > +		dev_err(&ctlr->dev,
> > +			"Fail to set bits_per_word for spi transfer\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	if (ctlr->bits_per_word_mask) {
> > +		if (!(xfer->len % 4)) {
> > +			if (ctlr->bits_per_word_mask & SPI_BPW_MASK(32))
> > +				xfer->bits_per_word = 32;
> > +		} else if (!(xfer->len % 2)) {
> > +			if (ctlr->bits_per_word_mask & SPI_BPW_MASK(16))
> > +				xfer->bits_per_word = 16;
> > +		} else {
> > +			xfer->bits_per_word = 8;
> > +		}
> > +	}
> > +
> > +	return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(spi_set_xfer_bpw);
> > +
> >  /**
> >   * spi_mem_exec_op() - Execute a memory operation
> >   * @mem: the SPI memory
> > @@ -252,6 +287,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const
> struct spi_mem_op *op)
> >  	xfers[xferpos].tx_buf = tmpbuf;
> >  	xfers[xferpos].len = sizeof(op->cmd.opcode);
> >  	xfers[xferpos].tx_nbits = op->cmd.buswidth;
> > +	spi_set_xfer_bpw(ctlr, &xfers[xferpos]);
> >  	spi_message_add_tail(&xfers[xferpos], &msg);
> >  	xferpos++;
> >  	totalxferlen++;
> > @@ -266,6 +302,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const
> struct spi_mem_op *op)
> >  		xfers[xferpos].tx_buf = tmpbuf + 1;
> >  		xfers[xferpos].len = op->addr.nbytes;
> >  		xfers[xferpos].tx_nbits = op->addr.buswidth;
> > +		spi_set_xfer_bpw(ctlr, &xfers[xferpos]);
> >  		spi_message_add_tail(&xfers[xferpos], &msg);
> >  		xferpos++;
> >  		totalxferlen += op->addr.nbytes;
> > @@ -276,6 +313,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const
> struct spi_mem_op *op)
> >  		xfers[xferpos].tx_buf = tmpbuf + op->addr.nbytes + 1;
> >  		xfers[xferpos].len = op->dummy.nbytes;
> >  		xfers[xferpos].tx_nbits = op->dummy.buswidth;
> > +		spi_set_xfer_bpw(ctlr, &xfers[xferpos]);
> >  		spi_message_add_tail(&xfers[xferpos], &msg);
> >  		xferpos++;
> >  		totalxferlen += op->dummy.nbytes;
> > @@ -291,6 +329,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const
> struct spi_mem_op *op)
> >  		}
> >
> >  		xfers[xferpos].len = op->data.nbytes;
> > +		spi_set_xfer_bpw(ctlr, &xfers[xferpos]);
> >  		spi_message_add_tail(&xfers[xferpos], &msg);
> >  		xferpos++;
> >  		totalxferlen += op->data.nbytes;