| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 1 Oct 2018 12:26:18 +0000
From: Vabhav Sharma <vabhav.sharma@....com>
To: Leo Li <leoyang.li@....com>
CC: Sudeep Holla <sudeep.holla@....com>, Scott Wood <oss@...error.net>,
lkml <linux-kernel@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linuxppc-dev <linuxppc-dev@...ts.ozlabs.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
Michael Turquette <mturquette@...libre.com>,
"sboyd@...nel.org" <sboyd@...nel.org>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>,
linux-clk <linux-clk@...r.kernel.org>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
"linux-kernel-owner@...r.kernel.org"
<linux-kernel-owner@...r.kernel.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Arnd Bergmann <arnd@...db.de>,
Kate Stewart <kstewart@...uxfoundation.org>,
"yamada.masahiro@...ionext.com" <yamada.masahiro@...ionext.com>,
Udit Kumar <udit.kumar@....com>,
Priyanka Jain <priyanka.jain@....com>,
Russell King <linux@...linux.org.uk>,
Sriram Dash <sriram.dash@....com>
Subject: RE: [PATCH v3 6/6] arm64: dts: add LX2160ARDB board support
> -----Original Message-----
> From: devicetree-owner@...r.kernel.org <devicetree-owner@...r.kernel.org>
> On Behalf Of Li Yang
> Sent: Saturday, September 29, 2018 1:07 AM
> To: Vabhav Sharma <vabhav.sharma@....com>
> Cc: Sudeep Holla <sudeep.holla@....com>; Scott Wood <oss@...error.net>;
> lkml <linux-kernel@...r.kernel.org>; open list:OPEN FIRMWARE AND
> FLATTENED DEVICE TREE BINDINGS <devicetree@...r.kernel.org>; Rob Herring
> <robh+dt@...nel.org>; Mark Rutland <mark.rutland@....com>; linuxppc-dev
> <linuxppc-dev@...ts.ozlabs.org>; moderated list:ARM/FREESCALE IMX / MXC
> ARM ARCHITECTURE <linux-arm-kernel@...ts.infradead.org>; Michael Turquette
> <mturquette@...libre.com>; sboyd@...nel.org; Rafael J. Wysocki
> <rjw@...ysocki.net>; Viresh Kumar <viresh.kumar@...aro.org>; linux-clk <linux-
> clk@...r.kernel.org>; linux-pm@...r.kernel.org; linux-kernel-
> owner@...r.kernel.org; Catalin Marinas <catalin.marinas@....com>; Will
> Deacon <will.deacon@....com>; Greg Kroah-Hartman
> <gregkh@...uxfoundation.org>; Arnd Bergmann <arnd@...db.de>; Kate
> Stewart <kstewart@...uxfoundation.org>; yamada.masahiro@...ionext.com;
> Udit Kumar <udit.kumar@....com>; Priyanka Jain <priyanka.jain@....com>;
> Russell King <linux@...linux.org.uk>; Varun Sethi <V.Sethi@....com>; Sriram
> Dash <sriram.dash@....com>
> Subject: Re: [PATCH v3 6/6] arm64: dts: add LX2160ARDB board support
>
> On Mon, Sep 24, 2018 at 7:51 AM Vabhav Sharma <vabhav.sharma@....com>
> wrote:
> >
> > LX2160A reference design board (RDB) is a high-performance computing,
> > evaluation, and development platform with LX2160A SoC.
>
> Please send next version with Shawn Guo and me in the "to" recipient so that its
> less likely we will miss it.
My mistake, Not Sure how it's missed.
>
> >
> > Signed-off-by: Priyanka Jain <priyanka.jain@....com>
> > Signed-off-by: Sriram Dash <sriram.dash@....com>
> > Signed-off-by: Vabhav Sharma <vabhav.sharma@....com>
> > ---
> > arch/arm64/boot/dts/freescale/Makefile | 1 +
> > arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 88
> > +++++++++++++++++++++++
> > 2 files changed, 89 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> >
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > b/arch/arm64/boot/dts/freescale/Makefile
> > index 86e18ad..445b72b 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-
> rdb.dtb
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
> > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> > b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> > new file mode 100644
> > index 0000000..1bbe663
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> > @@ -0,0 +1,88 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) // // Device Tree file
> > +for LX2160ARDB // // Copyright 2018 NXP
> > +
> > +/dts-v1/;
> > +
> > +#include "fsl-lx2160a.dtsi"
> > +
> > +/ {
> > + model = "NXP Layerscape LX2160ARDB";
> > + compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
> > +
> > +&uart1 {
> > + status = "okay";
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > + i2c-mux@77 {
> > + compatible = "nxp,pca9547";
> > + reg = <0x77>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + i2c@2 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x2>;
> > +
> > + power-monitor@40 {
> > + compatible = "ti,ina220";
> > + reg = <0x40>;
> > + shunt-resistor = <1000>;
> > + };
> > + };
> > +
> > + i2c@3 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x3>;
> > +
> > + temperature-sensor@4c {
> > + compatible = "nxp,sa56004";
> > + reg = <0x4c>;
>
> Need a vcc-supply property according to the binding.
Ok
>
> > + };
> > +
> > + temperature-sensor@4d {
> > + compatible = "nxp,sa56004";
> > + reg = <0x4d>;
>
> Ditto.
Ok
>
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c4 {
> > + status = "okay";
> > +
> > + rtc@51 {
> > + compatible = "nxp,pcf2129";
> > + reg = <0x51>;
> > + // IRQ10_B
> > + interrupts = <0 150 0x4>;
> > + };
> > +
> > +};
> > +
> > +&usb0 {
> > + status = "okay";
> > +};
> > +
> > +&usb1 {
> > + status = "okay";
> > +};
> > +
> > +&crypto {
> > + status = "okay";
> > +};
> > --
> > 2.7.4
> >
Powered by blists - more mailing lists