lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 2 Oct 2018 09:21:22 -0600
From:   Jeffrey Hugo <jhugo@...eaurora.org>
To:     Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Timur Tabi <timur@...nel.org>, swboyd@...omium.org,
        linux-gpio@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4 3/3] gpiolib: Show correct direction from the beginning

On 10/2/2018 8:08 AM, Ricardo Ribalda Delgado wrote:
> Current code assumes that the direction is input if direction_input
> function is set.
> This might not be the case on GPIOs with programmable direction.
> 
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>

I'll try to get this series tested on QDF2400 by the end of the week.

> ---
> Changelog v4:
> 
> timur@...nel.org:
> Remove REVISIT comment
> 
>   drivers/gpio/gpiolib.c | 27 +++++++++++++--------------
>   1 file changed, 13 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index 6925196136ce..cad859fece65 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -1344,20 +1344,6 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
>   
>   	spin_unlock_irqrestore(&gpio_lock, flags);
>   
> -	for (i = 0; i < chip->ngpio; i++) {
> -		struct gpio_desc *desc = &gdev->descs[i];
> -
> -		desc->gdev = gdev;
> -
> -		/* REVISIT: most hardware initializes GPIOs as inputs (often
> -		 * with pullups enabled) so power usage is minimized. Linux
> -		 * code should set the gpio direction first thing; but until
> -		 * it does, and in case chip->get_direction is not set, we may
> -		 * expose the wrong direction in sysfs.
> -		 */
> -		desc->flags = !chip->direction_input ? (1 << FLAG_IS_OUT) : 0;
> -	}
> -
>   #ifdef CONFIG_PINCTRL
>   	INIT_LIST_HEAD(&gdev->pin_ranges);
>   #endif
> @@ -1374,6 +1360,19 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
>   	if (status)
>   		goto err_remove_irqchip_mask;
>   
> +	for (i = 0; i < chip->ngpio; i++) {
> +		struct gpio_desc *desc = &gdev->descs[i];
> +
> +		desc->gdev = gdev;
> +
> +		if (chip->get_direction && gpiochip_line_is_valid(chip, i))
> +			desc->flags = !chip->get_direction(chip, i) ?
> +					(1 << FLAG_IS_OUT) : 0;
> +		else
> +			desc->flags = !chip->direction_input ?
> +					(1 << FLAG_IS_OUT) : 0;
> +	}
> +
>   	status = gpiochip_add_irqchip(chip, lock_key, request_key);
>   	if (status)
>   		goto err_remove_chip;
> 


-- 
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm 
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ