linux-kernel - [PATCH v6 1/2] dt-bindings: spi: Qualcomm Quad SPI(QSPI) documentation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181002214709.162330-1-ryandcase@chromium.org>
Date:   Tue,  2 Oct 2018 14:47:07 -0700
From:   Ryan Case <ryandcase@...omium.org>
To:     Mark Brown <broonie@...nel.org>
Cc:     Randy Dunlap <rdunlap@...radead.org>,
        Stephen Boyd <swboyd@...omium.org>,
        linux-arm-msm@...r.kernel.org,
        Doug Anderson <dianders@...omium.org>,
        Trent Piepho <tpiepho@...inj.com>,
        Boris Brezillon <boris.brezillon@...tlin.com>,
        Girish Mahadevan <girishm@...eaurora.org>,
        Ryan Case <ryandcase@...omium.org>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-spi@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Subject: [PATCH v6 1/2] dt-bindings: spi: Qualcomm Quad SPI(QSPI) documentation

From: Girish Mahadevan <girishm@...eaurora.org>

Bindings for Qualcomm Quad SPI used on SoCs such as sdm845.

Signed-off-by: Girish Mahadevan <girishm@...eaurora.org>
Signed-off-by: Ryan Case <ryandcase@...omium.org>
Reviewed-by: Douglas Anderson <dianders@...omium.org>
Reviewed-by: Rob Herring <robh@...nel.org>
Reviewed-by: Stephen Boyd <swboyd@...omium.org>
---

Changes in v6:
- None

Changes in v5:
- None

Changes in v4:
- Changed qspi@ to spi@ and device@ to flash@ to match Rob's review

Changes in v3:
- Added generic compatible string in addition to specific SoC

Changes in v2:
- Added commit text
- Removed invalid property
- Updated example to match sdm845 with attached spi-nor

 .../bindings/spi/qcom,spi-qcom-qspi.txt       | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt

diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
new file mode 100644
index 000000000000..1d64b61f5171
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
@@ -0,0 +1,36 @@
+Qualcomm Quad Serial Peripheral Interface (QSPI)
+
+The QSPI controller allows SPI protocol communication in single, dual, or quad
+wire transmission modes for read/write access to slaves such as NOR flash.
+
+Required properties:
+- compatible:	An SoC specific identifier followed by "qcom,qspi-v1", such as
+		"qcom,sdm845-qspi", "qcom,qspi-v1"
+- reg:		Should contain the base register location and length.
+- interrupts:	Interrupt number used by the controller.
+- clocks:	Should contain the core and AHB clock.
+- clock-names:	Should be "core" for core clock and "iface" for AHB clock.
+
+SPI slave nodes must be children of the SPI master node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+	qspi: spi@...f000 {
+		compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+		reg = <0x88df000 0x600>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "iface", "core";
+		clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			 <&gcc GCC_QSPI_CORE_CLK>;
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <25000000>;
+			spi-tx-bus-width = <2>;
+			spi-rx-bus-width = <2>;
+		};
+	};
-- 
2.19.0.605.g01d371f741-goog