| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1538482167-13819-18-git-send-email-ludovic.Barre@st.com>
Date: Tue, 2 Oct 2018 14:09:19 +0200
From: Ludovic Barre <ludovic.Barre@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>
CC: Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
<benjamin.gaignard@...aro.org>, Gerald Baeza <gerald.baeza@...com>,
Loic Pallardy <loic.pallardy@...com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-mmc@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Ludovic Barre <ludovic.barre@...com>
Subject: [PATCH V4 17/25] mmc: mmci: add variant property to define irq pio mask
From: Ludovic Barre <ludovic.barre@...com>
This patch allows to define specific pio mask for variants.
Needed to support the STM32 sdmmc variant which has some bits
with different meaning (bits: 21,20,13,12,9)
Signed-off-by: Ludovic Barre <ludovic.barre@...com>
---
drivers/mmc/host/mmci.c | 13 +++++++++++--
drivers/mmc/host/mmci.h | 5 ++++-
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 97b0f5c..ac33d23 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -61,6 +61,7 @@ static struct variant_data variant_arm = {
.f_max = 100000000,
.reversed_irq_handling = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.init = mmci_variant_init,
@@ -79,6 +80,7 @@ static struct variant_data variant_arm_extended_fifo = {
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.init = mmci_variant_init,
@@ -98,6 +100,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.init = mmci_variant_init,
@@ -123,6 +126,7 @@ static struct variant_data variant_u300 = {
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
@@ -149,6 +153,7 @@ static struct variant_data variant_nomadik = {
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
@@ -181,6 +186,7 @@ static struct variant_data variant_ux500 = {
.busy_detect_mask = MCI_ST_BUSYENDMASK,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
@@ -215,6 +221,7 @@ static struct variant_data variant_ux500v2 = {
.busy_detect_mask = MCI_ST_BUSYENDMASK,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
@@ -231,6 +238,7 @@ static struct variant_data variant_stm32 = {
.cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP,
.cmdreg_srsp_crc = MCI_CPSM_RESPONSE,
.cmdreg_srsp = MCI_CPSM_RESPONSE,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.datalength_bits = 24,
.datactrl_blocksz = 11,
.datactrl_dpsm_enable = MCI_DPSM_ENABLE,
@@ -267,6 +275,7 @@ static struct variant_data variant_qcom = {
.qcom_fifo = true,
.qcom_dml = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.init = qcom_variant_init,
@@ -548,7 +557,7 @@ static void mmci_set_mask1(struct mmci_host *host, unsigned int mask)
if (host->singleirq) {
unsigned int mask0 = readl(base + MMCIMASK0);
- mask0 &= ~MCI_IRQ1MASK;
+ mask0 &= ~variant->irq_pio_mask;
mask0 |= mask;
writel(mask0, base + MMCIMASK0);
@@ -1453,7 +1462,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
if (status & host->mask1_reg)
mmci_pio_irq(irq, dev_id);
- status &= ~MCI_IRQ1MASK;
+ status &= ~host->variant->irq_pio_mask;
}
/*
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index bd89745..4b10c82 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -186,7 +186,7 @@
MCI_CMDRESPENDMASK | MCI_CMDSENTMASK)
/* These interrupts are directed to IRQ1 when two IRQ lines are available */
-#define MCI_IRQ1MASK \
+#define MCI_IRQ_PIO_MASK \
(MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
MCI_TXFIFOHALFEMPTYMASK)
@@ -239,6 +239,8 @@ struct mmci_host;
* @qcom_dml: enables qcom specific dma glue for dma transfers.
* @reversed_irq_handling: handle data irq before cmd irq.
* @mmcimask1: true if variant have a MMCIMASK1 register.
+ * @irq_pio_mask: bitmask used to manage interrupt pio transfert in mmcimask
+ * register
* @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS
* register.
* @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register
@@ -278,6 +280,7 @@ struct variant_data {
u8 qcom_dml:1;
u8 reversed_irq_handling:1;
u8 mmcimask1:1;
+ unsigned int irq_pio_mask;
u32 start_err;
u32 opendrain;
void (*init)(struct mmci_host *host);
--
2.7.4
Powered by blists - more mailing lists