[<prev] [next>] [day] [month] [year] [list]
Message-ID: <1538582519-20957-1-git-send-email-adouglas@cadence.com>
Date: Wed, 3 Oct 2018 17:01:59 +0100
From: Alan Douglas <adouglas@...ence.com>
To: <kishon@...com>, <linux-kernel@...r.kernel.org>,
<mark.rutland@....com>, <robh+dt@...nel.org>,
<devicetree@...r.kernel.org>
CC: Alan Douglas <adouglas@...ence.com>
Subject: [PATCH 0/2] phy: cadence: Add driver and dt-bindings for Sierra PHY
The Cadence Sierra PHY supports a number of different protocols. This
series adds a driver with support for USB3 and PCIe modes.
Only one clock frequency is currently supported, so the value of clock
provided in device tree is ignored.
Changes since RFC v2:
* Devicetree bindings modified as suggested by Rob Herring.
* Tidy up and correction of return paths in probe function.
Changes since RFC v1:
* Each group of lanes is now treated as a subnode, and a generic PHY
device is created for each group.
* General cleanup based on comments
* A reset is now required for each subnode. The complete PHY block
is taken out of reset at initial probe, and remains out of reset.
* Added a binding to allow for hardware configuration of PHY registers
Alan Douglas (2):
dt-bindings: phy: Document cadence Sierra PHY bindings
phy: cadence: Add driver for Sierra PHY
.../devicetree/bindings/phy/cdns-sierra-phy.txt | 68 ++++
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/cadence/Kconfig | 9 +
drivers/phy/cadence/Makefile | 2 +
drivers/phy/cadence/cdns-sierra.c | 380 +++++++++++++++++++++
6 files changed, 461 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
create mode 100644 drivers/phy/cadence/Kconfig
create mode 100644 drivers/phy/cadence/Makefile
create mode 100644 drivers/phy/cadence/cdns-sierra.c
--
1.9.0
Powered by blists - more mailing lists