Message-Id: <20181003171720.169953-15-rkir@google.com>
Date:   Wed,  3 Oct 2018 10:17:20 -0700
From:   rkir@...gle.com
To:     gregkh@...uxfoundation.org
Cc:     linux-kernel@...r.kernel.org, tkjos@...gle.com,
        Roman Kiryanov <rkir@...gle.com>
Subject: [PATCH v3 15/15] platform: goldfish: pipe: Add the goldfish_pipe_v1 driver

From: Roman Kiryanov <rkir@...gle.com>

This is the v1 goldfish pipe driver.

Signed-off-by: Roman Kiryanov <rkir@...gle.com>
---
Changes in v3:
 - No change.
Changes in v2:
 - No change.

 drivers/platform/goldfish/Makefile            |   2 +-
 drivers/platform/goldfish/goldfish_pipe.c     |   9 +-
 .../platform/goldfish/goldfish_pipe_qemu.h    |  27 +
 drivers/platform/goldfish/goldfish_pipe_v1.c  | 632 ++++++++++++++++++
 drivers/platform/goldfish/goldfish_pipe_v1.h  |  24 +
 5 files changed, 689 insertions(+), 5 deletions(-)
 create mode 100644 drivers/platform/goldfish/goldfish_pipe_v1.c
 create mode 100644 drivers/platform/goldfish/goldfish_pipe_v1.h

diff --git a/drivers/platform/goldfish/Makefile b/drivers/platform/goldfish/Makefile
index 016769e003d8..3fb7427b9dd8 100644
--- a/drivers/platform/goldfish/Makefile
+++ b/drivers/platform/goldfish/Makefile
@@ -2,4 +2,4 @@
 # Makefile for Goldfish platform specific drivers
 #
 obj-$(CONFIG_GOLDFISH_PIPE)    += goldfish_pipe_all.o
-goldfish_pipe_all-objs := goldfish_pipe.o goldfish_pipe_v2.o
+goldfish_pipe_all-objs := goldfish_pipe.o goldfish_pipe_v1.o goldfish_pipe_v2.o
diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index 353f7ce94aa7..05a67895cc06 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -39,6 +39,7 @@
 #include <linux/acpi.h>
 #include "goldfish_pipe_qemu.h"
 #include "goldfish_pipe.h"
+#include "goldfish_pipe_v1.h"
 #include "goldfish_pipe_v2.h"
 
 /*
@@ -84,10 +85,10 @@ static int goldfish_pipe_probe(struct platform_device *pdev)
 	writel(PIPE_DRIVER_VERSION, base + PIPE_V2_REG_VERSION);
 	version = readl(base + PIPE_V2_REG_VERSION);
 
-	if (WARN_ON(version < PIPE_CURRENT_DEVICE_VERSION))
-		return -EINVAL;
-
-	return goldfish_pipe_device_v2_init(pdev, base, irq);
+	if (version < PIPE_CURRENT_DEVICE_VERSION)
+		return goldfish_pipe_device_v1_init(pdev, base, irq);
+	else
+		return goldfish_pipe_device_v2_init(pdev, base, irq);
 }
 
 static int goldfish_pipe_remove(struct platform_device *pdev)
diff --git a/drivers/platform/goldfish/goldfish_pipe_qemu.h b/drivers/platform/goldfish/goldfish_pipe_qemu.h
index 24b02710769f..9a8275f3583d 100644
--- a/drivers/platform/goldfish/goldfish_pipe_qemu.h
+++ b/drivers/platform/goldfish/goldfish_pipe_qemu.h
@@ -62,6 +62,33 @@ enum PipeFlagsBits {
 	BIT_WAKE_ON_READ   = 2,  /* want to be woken on reads */
 };
 
+enum PipeV1Regs {
+	/* write: value = command */
+	PIPE_V1_REG_COMMAND		= 0x00,
+	/* read */
+	PIPE_V1_REG_STATUS		= 0x04,
+	/* read/write: channel id */
+	PIPE_V1_REG_CHANNEL		= 0x08,
+	/* read/write: channel id */
+	PIPE_V1_REG_CHANNEL_HIGH	= 0x30,
+	/* read/write: buffer size */
+	PIPE_V1_REG_SIZE		= 0x0C,
+	/* write: physical address */
+	PIPE_V1_REG_ADDRESS		= 0x10,
+	/* write: physical address */
+	PIPE_V1_REG_ADDRESS_HIGH	= 0x34,
+	/* read: wake flags */
+	PIPE_V1_REG_WAKES		= 0x14,
+	/* read/write: batch data address */
+	PIPE_V1_REG_PARAMS_ADDR_LOW	= 0x18,
+	/* read/write: batch data address */
+	PIPE_V1_REG_PARAMS_ADDR_HIGH	= 0x1C,
+	/* write: batch access */
+	PIPE_V1_REG_ACCESS_PARAMS	= 0x20,
+	/* read: device version */
+	PIPE_V1_REG_VERSION		= 0x24,
+};
+
 enum PipeV2Regs {
 	PIPE_V2_REG_CMD = 0,
 
diff --git a/drivers/platform/goldfish/goldfish_pipe_v1.c b/drivers/platform/goldfish/goldfish_pipe_v1.c
new file mode 100644
index 000000000000..6e603204dd62
--- /dev/null
+++ b/drivers/platform/goldfish/goldfish_pipe_v1.c
@@ -0,0 +1,632 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 Google, Inc.
+ * Copyright (C) 2012 Intel, Inc.
+ * Copyright (C) 2013 Intel, Inc.
+ * Copyright (C) 2014 Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/* This source file contains the implementation of the legacy version of
+ * a goldfish pipe device driver. See goldfish_pipe_v2.c for the current
+ * version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/miscdevice.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/bug.h>
+#include <linux/goldfish.h>
+#include "goldfish_pipe_qemu.h"
+#include "goldfish_pipe.h"
+
+#define MAX_PAGES_TO_GRAB 32
+
+/* A value that will not be set by qemu emulator */
+#define INITIAL_BATCH_RESULT (0xdeadbeaf)
+
+struct goldfish_pipe_dev;
+
+/* This data type models a given pipe instance */
+struct goldfish_pipe {
+	struct goldfish_pipe_dev *dev;
+
+	/* The wake flags pipe is waiting for
+	 * Note: not protected with any lock, uses atomic operations
+	 *  and barriers to make it thread-safe.
+	 */
+	unsigned long flags;
+
+	wait_queue_head_t wake_queue;
+
+	/* protects access to the pipe */
+	struct mutex lock;
+};
+
+struct access_params {
+	unsigned long channel;
+	u32 size;
+	unsigned long address;
+	u32 cmd;
+	u32 result;
+	/* reserved for future extension */
+	u32 flags;
+};
+
+/* The driver state. Holds a reference to the i/o page used to
+ * communicate with the emulator, and a wake queue for blocked tasks
+ * waiting to be awoken.
+ */
+struct goldfish_pipe_dev {
+	/* Needed for the 'remove' call */
+	struct goldfish_pipe_dev_base super;
+
+	/* ptr to platform device's device struct */
+	struct device *pdev_dev;
+
+	/* the base address for MMIO */
+	char __iomem *base;
+
+	struct access_params *aps;
+
+	struct miscdevice miscdev;
+
+	/* Global device spinlock */
+	spinlock_t lock;
+};
+
+static int goldfish_pipe_device_deinit(void *raw_dev,
+				       struct platform_device *pdev);
+
+static u32 goldfish_cmd_status(struct goldfish_pipe *pipe, u32 cmd)
+{
+	unsigned long flags;
+	u32 status;
+	struct goldfish_pipe_dev *dev = pipe->dev;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	gf_write_ptr(pipe, dev->base + PIPE_V1_REG_CHANNEL,
+		     dev->base + PIPE_V1_REG_CHANNEL_HIGH);
+	writel(cmd, dev->base + PIPE_V1_REG_COMMAND);
+	status = readl(dev->base + PIPE_V1_REG_STATUS);
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return status;
+}
+
+static void goldfish_cmd(struct goldfish_pipe *pipe, u32 cmd)
+{
+	unsigned long flags;
+	struct goldfish_pipe_dev *dev = pipe->dev;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	gf_write_ptr(pipe, dev->base + PIPE_V1_REG_CHANNEL,
+		     dev->base + PIPE_V1_REG_CHANNEL_HIGH);
+	writel(cmd, dev->base + PIPE_V1_REG_COMMAND);
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+/* This function converts an error code returned by the emulator through
+ * the PIPE_V1_REG_STATUS i/o register into a valid negative errno value.
+ */
+static int goldfish_pipe_error_convert(int status)
+{
+	switch (status) {
+	case PIPE_ERROR_AGAIN:
+		return -EAGAIN;
+	case PIPE_ERROR_NOMEM:
+		return -ENOMEM;
+	case PIPE_ERROR_IO:
+		return -EIO;
+	default:
+		return -EINVAL;
+	}
+}
+
+/*
+ * Notice: QEMU will return 0 for un-known register access, indicating
+ * access_params is supported or not
+ */
+static int valid_batchbuffer_addr(struct goldfish_pipe_dev *dev,
+				  struct access_params *aps)
+{
+	u32 aph, apl;
+	u64 paddr;
+
+	aph = readl(dev->base + PIPE_V1_REG_PARAMS_ADDR_HIGH);
+	apl = readl(dev->base + PIPE_V1_REG_PARAMS_ADDR_LOW);
+
+	paddr = ((u64)aph << 32) | apl;
+	return paddr == (__pa(aps));
+}
+
+static int setup_access_params_addr(struct platform_device *pdev,
+				    struct goldfish_pipe_dev *dev)
+{
+	u64 paddr;
+	struct access_params *aps;
+
+	aps = devm_kzalloc(&pdev->dev, sizeof(struct access_params),
+			   GFP_KERNEL);
+	if (!aps)
+		return -ENOMEM;
+
+	paddr = __pa(aps);
+	writel((u32)(paddr >> 32), dev->base + PIPE_V1_REG_PARAMS_ADDR_HIGH);
+	writel((u32)paddr, dev->base + PIPE_V1_REG_PARAMS_ADDR_LOW);
+
+	if (valid_batchbuffer_addr(dev, aps)) {
+		dev->aps = aps;
+		return 0;
+	}
+
+	devm_kfree(&pdev->dev, aps);
+	return -EFAULT;
+}
+
+static int access_with_param(struct goldfish_pipe_dev *dev, const int cmd,
+			     unsigned long address, unsigned long avail,
+			     struct goldfish_pipe *pipe, int *status)
+{
+	struct access_params *aps = dev->aps;
+
+	if (!aps)
+		return -EINVAL;
+
+	aps->result = INITIAL_BATCH_RESULT;
+	aps->channel = (unsigned long)pipe;
+	aps->size = avail;
+	aps->address = address;
+	aps->cmd = cmd;
+	writel(cmd, dev->base + PIPE_V1_REG_ACCESS_PARAMS);
+
+	/*
+	 * If the aps->result has not changed, that means
+	 * that the batch command failed
+	 */
+	if (aps->result == INITIAL_BATCH_RESULT)
+		return -EINVAL;
+
+	*status = aps->result;
+	return 0;
+}
+
+static int transfer_pages(struct goldfish_pipe_dev *dev,
+			  struct goldfish_pipe *pipe,
+			  int cmd,
+			  unsigned long xaddr,
+			  unsigned long size)
+{
+	unsigned long irq_flags;
+	int status = 0;
+
+	spin_lock_irqsave(&dev->lock, irq_flags);
+	if (access_with_param(dev, cmd, xaddr, size, pipe, &status)) {
+		gf_write_ptr(pipe, dev->base + PIPE_V1_REG_CHANNEL,
+			     dev->base + PIPE_V1_REG_CHANNEL_HIGH);
+
+		writel(size, dev->base + PIPE_V1_REG_SIZE);
+
+		gf_write_ptr((void *)xaddr,
+			     dev->base + PIPE_V1_REG_ADDRESS,
+			     dev->base + PIPE_V1_REG_ADDRESS_HIGH);
+
+		writel(cmd, dev->base + PIPE_V1_REG_COMMAND);
+
+		status = readl(dev->base + PIPE_V1_REG_STATUS);
+	}
+	spin_unlock_irqrestore(&dev->lock, irq_flags);
+
+	return status;
+}
+
+static unsigned long translate_address(const struct page *page,
+				       unsigned long addr)
+{
+	return page_to_phys(page) | (addr & ~PAGE_MASK);
+}
+
+static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
+					size_t bufflen, int is_write)
+{
+	struct goldfish_pipe *pipe = filp->private_data;
+	struct goldfish_pipe_dev *dev = pipe->dev;
+	unsigned long address;
+	unsigned long address_end;
+	const int wake_bit = is_write ? BIT_WAKE_ON_WRITE : BIT_WAKE_ON_READ;
+	const int pipe_cmd = is_write ? PIPE_CMD_WRITE : PIPE_CMD_READ;
+	int count = 0;
+	int ret = -EINVAL;
+
+	/* If the emulator already closed the pipe, no need to go further */
+	if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags))
+		return -EIO;
+
+	/* Null reads or writes succeeds */
+	if (unlikely(bufflen == 0))
+		return 0;
+
+	/* Check the buffer range for access */
+	if (!access_ok(is_write ? VERIFY_WRITE : VERIFY_READ,
+		       buffer, bufflen))
+		return -EFAULT;
+
+	address = (unsigned long)buffer;
+	address_end = address + bufflen;
+
+	/* Serialize access to the pipe */
+	if (mutex_lock_interruptible(&pipe->lock))
+		return -ERESTARTSYS;
+
+	while (address < address_end) {
+		struct page *pages[MAX_PAGES_TO_GRAB];
+		unsigned long page_end = (address & PAGE_MASK) + PAGE_SIZE;
+		unsigned long avail;
+		unsigned long xaddr;
+		unsigned long xaddr_prev;
+		long first_page;
+		long last_page;
+		long requested_pages;
+		int status;
+		int n_pages;
+		int page_i;
+		int num_contiguous_pages;
+
+		/*
+		 * Attempt to grab multiple physically contiguous pages.
+		 */
+		first_page = address & PAGE_MASK;
+		last_page = (address_end - 1) & PAGE_MASK;
+		requested_pages =
+			min(((last_page - first_page) >> PAGE_SHIFT) + 1,
+			    (long)MAX_PAGES_TO_GRAB);
+
+		ret = get_user_pages_fast(first_page, requested_pages,
+					  !is_write, pages);
+		if (ret < 0) {
+			dev_err(dev->pdev_dev,
+				"%s: get_user_pages_fast failed: %d\n",
+				__func__, ret);
+			break;
+		} else if (!ret) {
+			dev_err(dev->pdev_dev,
+				"%s: error: no pages returned, requested %ld\n",
+				__func__, requested_pages);
+			break;
+		}
+
+		n_pages = ret;
+		xaddr = translate_address(pages[0], address);
+		xaddr_prev = xaddr;
+		num_contiguous_pages = 1;
+		for (page_i = 1; page_i < n_pages; page_i++) {
+			unsigned long xaddr_i;
+
+			xaddr_i = translate_address(pages[page_i], address);
+			if (xaddr_i == xaddr_prev + PAGE_SIZE) {
+				page_end += PAGE_SIZE;
+				xaddr_prev = xaddr_i;
+				num_contiguous_pages++;
+			} else {
+				dev_err(dev->pdev_dev,
+					"%s: discontinuous page boundary: %d "
+					"pages instead\n",
+					__func__, page_i);
+				break;
+			}
+		}
+		avail = min(page_end, address_end) - address;
+
+		status = transfer_pages(dev, pipe, pipe_cmd, xaddr, avail);
+
+		for (page_i = 0; page_i < n_pages; page_i++) {
+			if (status > 0 && !is_write &&
+			    page_i < num_contiguous_pages)
+				set_page_dirty(pages[page_i]);
+
+			put_page(pages[page_i]);
+		}
+
+		if (status > 0) { /* Correct transfer */
+			count += status;
+			address += status;
+			continue;
+		} else if (status == 0) { /* EOF */
+			ret = 0;
+			break;
+		} else if (status < 0 && count > 0) {
+			/*
+			 * An error occurred and we already transferred
+			 * something on one of the previous pages.
+			 * Just return what we already copied and log this
+			 * err.
+			 *
+			 * Note: This seems like an incorrect approach but
+			 * cannot change it until we check if any user space
+			 * ABI relies on this behavior.
+			 */
+			if (status != PIPE_ERROR_AGAIN)
+				dev_err_ratelimited(dev->pdev_dev,
+					"backend returned error %d on %s\n",
+					status, is_write ? "write" : "read");
+			ret = 0;
+			break;
+		}
+
+		/*
+		 * If the error is not PIPE_ERROR_AGAIN, or if we are not in
+		 * non-blocking mode, just return the error code.
+		 */
+		if (status != PIPE_ERROR_AGAIN ||
+		    (filp->f_flags & O_NONBLOCK) != 0) {
+			ret = goldfish_pipe_error_convert(status);
+			break;
+		}
+
+		/*
+		 * The backend blocked the read/write, wait until the backend
+		 * tells us it's ready to process more data.
+		 */
+		set_bit(wake_bit, &pipe->flags);
+
+		/* Tell the emulator we're going to wait for a wake event */
+		goldfish_cmd(pipe, pipe_cmd);
+
+		/* Unlock the pipe, then wait for the wake signal */
+		mutex_unlock(&pipe->lock);
+
+		while (test_bit(wake_bit, &pipe->flags)) {
+			if (wait_event_interruptible(pipe->wake_queue,
+					!test_bit(wake_bit, &pipe->flags)))
+				return -ERESTARTSYS;
+
+			if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags))
+				return -EIO;
+		}
+
+		/* Try to re-acquire the lock */
+		if (mutex_lock_interruptible(&pipe->lock))
+			return -ERESTARTSYS;
+	}
+	mutex_unlock(&pipe->lock);
+
+	return (ret < 0) ? ret : count;
+}
+
+static ssize_t goldfish_pipe_read(struct file *filp, char __user *buffer,
+				  size_t bufflen, loff_t *ppos)
+{
+	return goldfish_pipe_read_write(filp, buffer, bufflen,
+					/* is_write */ 0);
+}
+
+static ssize_t goldfish_pipe_write(struct file *filp,
+				   const char __user *buffer, size_t bufflen,
+				   loff_t *ppos)
+{
+	return goldfish_pipe_read_write(filp, (char __user *)buffer,
+					bufflen, /* is_write */ 1);
+}
+
+static __poll_t goldfish_pipe_poll(struct file *filp, poll_table *wait)
+{
+	struct goldfish_pipe *pipe = filp->private_data;
+	__poll_t mask = 0;
+	int status;
+
+	if (mutex_lock_interruptible(&pipe->lock))
+		return -ERESTARTSYS;
+
+	poll_wait(filp, &pipe->wake_queue, wait);
+
+	status = goldfish_cmd_status(pipe, PIPE_CMD_POLL);
+
+	mutex_unlock(&pipe->lock);
+
+	if (status & PIPE_POLL_IN)
+		mask |= EPOLLIN | EPOLLRDNORM;
+
+	if (status & PIPE_POLL_OUT)
+		mask |= EPOLLOUT | EPOLLWRNORM;
+
+	if (status & PIPE_POLL_HUP)
+		mask |= EPOLLHUP;
+
+	if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags))
+		mask |= EPOLLERR;
+
+	return mask;
+}
+
+static irqreturn_t goldfish_pipe_interrupt(int irq, void *dev_id)
+{
+	struct goldfish_pipe_dev *dev = dev_id;
+	unsigned long irq_flags;
+	int count = 0;
+
+	/*
+	 * We're going to read from the emulator a list of (channel,flags)
+	 * pairs corresponding to the wake events that occurred on each
+	 * blocked pipe (i.e. channel).
+	 */
+	spin_lock_irqsave(&dev->lock, irq_flags);
+	for (;;) {
+		/* First read the channel, 0 means the end of the list */
+		struct goldfish_pipe *pipe;
+		unsigned long wakes;
+		unsigned long channel = 0;
+
+#ifdef CONFIG_64BIT
+		channel =
+			(u64)readl(dev->base + PIPE_V1_REG_CHANNEL_HIGH) << 32;
+#endif
+		channel |= readl(dev->base + PIPE_V1_REG_CHANNEL);
+		if (!channel)
+			break;
+
+		/* Convert channel to struct pipe pointer + read wake flags */
+		wakes = readl(dev->base + PIPE_V1_REG_WAKES);
+		pipe  = (struct goldfish_pipe *)(ptrdiff_t)channel;
+
+		/* Did the emulator just closed a pipe? */
+		if (wakes & PIPE_WAKE_CLOSED) {
+			set_bit(BIT_CLOSED_ON_HOST, &pipe->flags);
+			wakes |= PIPE_WAKE_READ | PIPE_WAKE_WRITE;
+		}
+		if (wakes & PIPE_WAKE_READ)
+			clear_bit(BIT_WAKE_ON_READ, &pipe->flags);
+		if (wakes & PIPE_WAKE_WRITE)
+			clear_bit(BIT_WAKE_ON_WRITE, &pipe->flags);
+
+		wake_up_interruptible(&pipe->wake_queue);
+		count++;
+	}
+	spin_unlock_irqrestore(&dev->lock, irq_flags);
+
+	return (count == 0) ? IRQ_NONE : IRQ_HANDLED;
+}
+
+/* A helper function to get the instance of goldfish_pipe_dev from file */
+static struct goldfish_pipe_dev *to_goldfish_pipe_dev(struct file *file)
+{
+	struct miscdevice *miscdev = file->private_data;
+
+	return container_of(miscdev, struct goldfish_pipe_dev, miscdev);
+}
+
+/**
+ *	goldfish_pipe_open - open a channel to the AVD
+ *	@inode: inode of device
+ *	@file: file struct of opener
+ *
+ *	Create a new pipe link between the emulator and the use application.
+ *	Each new request produces a new pipe.
+ *
+ *	Note: we use the pipe ID as a mux. All goldfish emulations are 32bit
+ *	right now so this is fine. A move to 64bit will need this addressing
+ */
+static int goldfish_pipe_open(struct inode *inode, struct file *file)
+{
+	struct goldfish_pipe_dev *dev = to_goldfish_pipe_dev(file);
+	struct goldfish_pipe *pipe;
+	int status;
+
+	/* Allocate new pipe kernel object */
+	pipe = kzalloc(sizeof(*pipe), GFP_KERNEL);
+	if (!pipe)
+		return -ENOMEM;
+
+	pipe->dev = dev;
+	init_waitqueue_head(&pipe->wake_queue);
+	mutex_init(&pipe->lock);
+
+	/*
+	 * Now, tell the emulator we're opening a new pipe. We use the
+	 * pipe object's address as the channel identifier for simplicity.
+	 */
+
+	status = goldfish_cmd_status(pipe, PIPE_CMD_OPEN);
+	if (status < 0) {
+		kfree(pipe);
+		return status;
+	}
+
+	/* All is done, save the pipe into the file's private data field */
+	file->private_data = pipe;
+	return 0;
+}
+
+static int goldfish_pipe_release(struct inode *inode, struct file *filp)
+{
+	struct goldfish_pipe *pipe = filp->private_data;
+
+	pr_debug("%s: call. pipe=%p file=%p\n", __func__, pipe, filp);
+	/* The guest is closing the channel, so tell the emulator right now */
+	goldfish_cmd(pipe, PIPE_CMD_CLOSE);
+	kfree(pipe);
+	filp->private_data = NULL;
+	return 0;
+}
+
+static const struct file_operations goldfish_pipe_fops = {
+	.owner = THIS_MODULE,
+	.read = goldfish_pipe_read,
+	.write = goldfish_pipe_write,
+	.poll = goldfish_pipe_poll,
+	.open = goldfish_pipe_open,
+	.release = goldfish_pipe_release,
+};
+
+static void init_miscdevice(struct miscdevice *miscdev)
+{
+	memset(miscdev, 0, sizeof(*miscdev));
+
+	miscdev->minor = MISC_DYNAMIC_MINOR;
+	miscdev->name = DEVICE_NAME;
+	miscdev->fops = &goldfish_pipe_fops;
+};
+
+static int goldfish_pipe_device_deinit(void *raw_dev,
+				       struct platform_device *pdev);
+
+int goldfish_pipe_device_v1_init(struct platform_device *pdev,
+				 void __iomem *base,
+				 int irq)
+{
+	struct goldfish_pipe_dev *dev;
+	int err;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->super.deinit = &goldfish_pipe_device_deinit;
+	dev->pdev_dev = &pdev->dev;
+	spin_lock_init(&dev->lock);
+
+	err = devm_request_irq(&pdev->dev, irq,
+			       &goldfish_pipe_interrupt, IRQF_SHARED,
+			       DEVICE_NAME, dev);
+	if (err) {
+		dev_err(&pdev->dev, "unable to allocate IRQ for v1\n");
+		return err;
+	}
+
+	init_miscdevice(&dev->miscdev);
+	err = misc_register(&dev->miscdev);
+	if (err) {
+		dev_err(&pdev->dev, "unable to register v1 device\n");
+		return err;
+	}
+
+	setup_access_params_addr(pdev, dev);
+
+	platform_set_drvdata(pdev, dev);
+	return 0;
+}
+
+static int goldfish_pipe_device_deinit(void *raw_dev,
+				       struct platform_device *pdev)
+{
+	struct goldfish_pipe_dev *dev = raw_dev;
+
+	misc_deregister(&dev->miscdev);
+	return 0;
+}
diff --git a/drivers/platform/goldfish/goldfish_pipe_v1.h b/drivers/platform/goldfish/goldfish_pipe_v1.h
new file mode 100644
index 000000000000..6d61441e2a7f
--- /dev/null
+++ b/drivers/platform/goldfish/goldfish_pipe_v1.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef GOLDFISH_PIPE_V1_H
+#define GOLDFISH_PIPE_V1_H
+
+/* The entry point to the pipe v1 driver */
+int goldfish_pipe_device_v1_init(struct platform_device *pdev,
+				 void __iomem *base,
+				 int irq);
+
+#endif /* #define GOLDFISH_PIPE_V1_H */
-- 
2.19.0.605.g01d371f741-goog

Powered by blists - more mailing lists