[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <VI1PR04MB10380FD9CE99E34BA27E55B699EA0@VI1PR04MB1038.eurprd04.prod.outlook.com>
Date: Thu, 4 Oct 2018 09:14:36 +0000
From: Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
To: Boris Brezillon <boris.brezillon@...tlin.com>
CC: "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"marek.vasut@...il.com" <marek.vasut@...il.com>,
"vigneshr@...com" <vigneshr@...com>,
"linux-spi@...r.kernel.org" <linux-spi@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"robh@...nel.org" <robh@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"computersforpeace@...il.com" <computersforpeace@...il.com>,
"frieder.schrempf@...eet.de" <frieder.schrempf@...eet.de>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 1/4] spi: add support for octal I/O data transfer
Hi Boris,
> -----Original Message-----
> From: Boris Brezillon [mailto:boris.brezillon@...tlin.com]
> Sent: Thursday, October 4, 2018 2:35 PM
> To: Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
> Cc: linux-mtd@...ts.infradead.org; marek.vasut@...il.com; vigneshr@...com;
> linux-spi@...r.kernel.org; devicetree@...r.kernel.org; robh@...nel.org;
> mark.rutland@....com; shawnguo@...nel.org; linux-arm-
> kernel@...ts.infradead.org; computersforpeace@...il.com;
> frieder.schrempf@...eet.de; linux-kernel@...r.kernel.org
> Subject: Re: [PATCH 1/4] spi: add support for octal I/O data transfer
>
> Hi Yogesh,
>
> On Thu, 4 Oct 2018 14:18:37 +0530
> Yogesh Gaur <yogeshnarayan.gaur@....com> wrote:
>
> > Add flags for Octal I/O data transfer
> > Required for the SPI controller which can do the data transfer (TX/RX)
> > on 8 data lines e.g. NXP FlexSPI controller.
> > SPI_TX_OCTAL: transmit with 8 wires
> > SPI_RX_OCTAL: receive with 8 wires
> >
> > Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@....com>
> > ---
> > drivers/spi/spi.c | 6 ++++++
> > include/linux/spi/spi.h | 2 ++
> > 2 files changed, 8 insertions(+)
> >
> > diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index
> > ec395a6..80f672f 100644
> > --- a/drivers/spi/spi.c
> > +++ b/drivers/spi/spi.c
> > @@ -1573,6 +1573,9 @@ static int of_spi_parse_dt(struct spi_controller *ctlr,
> struct spi_device *spi,
> > case 4:
> > spi->mode |= SPI_TX_QUAD;
> > break;
> > + case 8:
> > + spi->mode |= SPI_TX_OCTAL;
> > + break;
> > default:
> > dev_warn(&ctlr->dev,
> > "spi-tx-bus-width %d not supported\n", @@ -
> 1591,6 +1594,9 @@
> > static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
> > case 4:
> > spi->mode |= SPI_RX_QUAD;
> > break;
> > + case 8:
> > + spi->mode |= SPI_RX_OCTAL;
> > + break;
> > default:
> > dev_warn(&ctlr->dev,
> > "spi-rx-bus-width %d not supported\n", diff --
> git
> > a/include/linux/spi/spi.h b/include/linux/spi/spi.h index
> > a64235e..2d21307 100644
> > --- a/include/linux/spi/spi.h
> > +++ b/include/linux/spi/spi.h
> > @@ -163,6 +163,8 @@ struct spi_device {
> > #define SPI_TX_QUAD 0x200 /* transmit with 4
> wires */
> > #define SPI_RX_DUAL 0x400 /* receive with 2 wires
> */
> > #define SPI_RX_QUAD 0x800 /* receive with 4 wires
> */
> > +#define SPI_TX_OCTAL 0x1000 /* transmit with 8
> wires */
> > +#define SPI_RX_OCTAL 0x2000 /* receive with 8 wires
> */
> > int irq;
> > void *controller_state;
> > void *controller_data;
>
> You're still not updating spi-mem.c to check those flags and
> SPI_MEM_MAX_BUSWIDTH is not updated to match the new limit (8 instead of
> 4).
>
Yes and its strange that my octal mode communication is working fine without adding support in spi-mem.c and that's why this has been missed from me.
For this patch series, have done data read/write verification using MTD_DEBUG and JFFS2 mount utility and none of them reports data read error.
Would add octal mode related changes in this file too.
--
Regards
Yogesh Gaur.
> Regards,
>
> Boris
Powered by blists - more mailing lists