| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+RiK67Yg01QB+aFVdRqZ-cEg+RHO-9qGd2n-NxZWcwGfQFvzw@mail.gmail.com>
Date: Thu, 4 Oct 2018 16:00:21 +0530
From: Suganath Prabu Subramani <suganath-prabu.subramani@...adcom.com>
To: joe@...ches.com
Cc: Sathya Prakash <sathya.prakash@...adcom.com>,
jejb@...ux.vnet.ibm.com,
"Martin K. Petersen" <martin.petersen@...cle.com>,
PDL-MPT-FUSIONLINUX <MPT-FusionLinux.pdl@...adcom.com>,
linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 6/7] mpt3sas: Convert logging uses with MPT3SAS_FMT
without logging levels
Hi,
Please consider this patch as Acked-by: Suganath Prabu
<suganath-prabu.subramani@...adcom.com>
Thanks.
On Mon, Sep 17, 2018 at 8:33 PM Joe Perches <joe@...ches.com> wrote:
>
> Convert these uses to ioc_<level> where appropriate.
>
> Signed-off-by: Joe Perches <joe@...ches.com>
> ---
> drivers/scsi/mpt3sas/mpt3sas_base.c | 41 +++++++++++++++-----------------
> drivers/scsi/mpt3sas/mpt3sas_scsih.c | 12 +++++-----
> drivers/scsi/mpt3sas/mpt3sas_transport.c | 6 ++---
> 3 files changed, 28 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
> index 386af6739867..cf5a21717a6f 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
> @@ -2819,9 +2819,8 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
> ioc->reply_queue_count = min_t(int, ioc->cpu_count,
> ioc->msix_vector_count);
>
> - printk(MPT3SAS_FMT "MSI-X vectors supported: %d, no of cores"
> - ": %d, max_msix_vectors: %d\n", ioc->name, ioc->msix_vector_count,
> - ioc->cpu_count, max_msix_vectors);
> + ioc_info(ioc, "MSI-X vectors supported: %d, no of cores: %d, max_msix_vectors: %d\n",
> + ioc->msix_vector_count, ioc->cpu_count, max_msix_vectors);
>
> if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
> local_max_msix_vectors = (reset_devices) ? 1 : 8;
> @@ -2886,8 +2885,7 @@ mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
> {
> struct pci_dev *pdev = ioc->pdev;
>
> - dexitprintk(ioc, printk(MPT3SAS_FMT "%s\n",
> - ioc->name, __func__));
> + dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
>
> _base_free_irq(ioc);
> _base_disable_msix(ioc);
> @@ -3007,9 +3005,8 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
> ioc->combined_reply_index_count,
> sizeof(resource_size_t *), GFP_KERNEL);
> if (!ioc->replyPostRegisterIndex) {
> - dfailprintk(ioc, printk(MPT3SAS_FMT
> - "allocation for reply Post Register Index failed!!!\n",
> - ioc->name));
> + dfailprintk(ioc,
> + ioc_warn(ioc, "allocation for reply Post Register Index failed!!!\n"));
> r = -ENOMEM;
> goto out_fail;
> }
> @@ -5438,26 +5435,26 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
> u32 ioc_state;
> int rc;
>
> - dinitprintk(ioc, printk(MPT3SAS_FMT "%s\n", ioc->name,
> - __func__));
> + dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
>
> if (ioc->pci_error_recovery) {
> - dfailprintk(ioc, printk(MPT3SAS_FMT
> - "%s: host in pci error recovery\n", ioc->name, __func__));
> + dfailprintk(ioc,
> + ioc_info(ioc, "%s: host in pci error recovery\n",
> + __func__));
> return -EFAULT;
> }
>
> ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
> - dhsprintk(ioc, printk(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
> - ioc->name, __func__, ioc_state));
> + dhsprintk(ioc,
> + ioc_info(ioc, "%s: ioc_state(0x%08x)\n",
> + __func__, ioc_state));
>
> if (((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) ||
> (ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
> return 0;
>
> if (ioc_state & MPI2_DOORBELL_USED) {
> - dhsprintk(ioc, printk(MPT3SAS_FMT
> - "unexpected doorbell active!\n", ioc->name));
> + dhsprintk(ioc, ioc_info(ioc, "unexpected doorbell active!\n"));
> goto issue_diag_reset;
> }
>
> @@ -5469,9 +5466,9 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
>
> ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout);
> if (ioc_state) {
> - dfailprintk(ioc, printk(MPT3SAS_FMT
> - "%s: failed going to ready state (ioc_state=0x%x)\n",
> - ioc->name, __func__, ioc_state));
> + dfailprintk(ioc,
> + ioc_info(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n",
> + __func__, ioc_state));
> return -EFAULT;
> }
>
> @@ -5498,9 +5495,9 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc)
>
> r = _base_wait_for_iocstate(ioc, 10);
> if (r) {
> - dfailprintk(ioc, printk(MPT3SAS_FMT
> - "%s: failed getting to correct state\n",
> - ioc->name, __func__));
> + dfailprintk(ioc,
> + ioc_info(ioc, "%s: failed getting to correct state\n",
> + __func__));
> return r;
> }
> mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> index 8089be381c72..4d73b5e6e2fc 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> @@ -4999,16 +4999,16 @@ _scsih_turn_off_pfa_led(struct MPT3SAS_ADAPTER *ioc,
> mpi_request.Flags = MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS;
> if ((mpt3sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
> &mpi_request)) != 0) {
> - printk(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
> - __FILE__, __LINE__, __func__);
> + ioc_err(ioc, "failure at %s:%d/%s()!\n",
> + __FILE__, __LINE__, __func__);
> return;
> }
>
> if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
> - dewtprintk(ioc, printk(MPT3SAS_FMT
> - "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
> - ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
> - le32_to_cpu(mpi_reply.IOCLogInfo)));
> + dewtprintk(ioc,
> + ioc_info(ioc, "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
> + le16_to_cpu(mpi_reply.IOCStatus),
> + le32_to_cpu(mpi_reply.IOCLogInfo)));
> return;
> }
> }
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
> index 09034a3fba2c..031b420f4d40 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
> @@ -717,9 +717,9 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
> sas_device = mpt3sas_get_sdev_by_addr(ioc,
> mpt3sas_port->remote_identify.sas_address);
> if (!sas_device) {
> - dfailprintk(ioc, printk(MPT3SAS_FMT
> - "failure at %s:%d/%s()!\n",
> - ioc->name, __FILE__, __LINE__, __func__));
> + dfailprintk(ioc,
> + ioc_info(ioc, "failure at %s:%d/%s()!\n",
> + __FILE__, __LINE__, __func__));
> goto out_fail;
> }
> sas_device->pend_sas_rphy_add = 1;
> --
> 2.15.0
>
Powered by blists - more mailing lists