[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20181004111451.9539-2-faiz_abbas@ti.com>
Date: Thu, 4 Oct 2018 16:44:46 +0530
From: Faiz Abbas <faiz_abbas@...com>
To: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-mmc@...r.kernel.org>
CC: <kishon@...com>, <faiz_abbas@...com>, <ulf.hansson@...aro.org>,
<robh+dt@...nel.org>, <catalin.marinas@....com>,
<adrian.hunter@...el.com>
Subject: [PATCH 1/6] dt-bindings: phy: am654-mmc-phy: Document new phy bindings
Add information to document bindings for the MMC PHY
on TI's AM654 devices.
Signed-off-by: Faiz Abbas <faiz_abbas@...com>
Signed-off-by: Sekhar Nori <nsekhar@...com>
---
.../devicetree/bindings/phy/am654-mmc-phy.txt | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/am654-mmc-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/am654-mmc-phy.txt b/Documentation/devicetree/bindings/phy/am654-mmc-phy.txt
new file mode 100644
index 000000000000..766921612758
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/am654-mmc-phy.txt
@@ -0,0 +1,42 @@
+TI AM654 MMC PHY
+-------------------
+
+Required properties:
+ - compatible: ti,am654-emmc-phy
+ - #phy-cells: must be 0
+ - reg: PHY registers address offset and size
+ - clocks: must be phandle of the clock provider which is the host
+ controller
+ - clock-names: must be "mmcclk"
+ - ti,otap-del-sel: Output Tap Delay select.
+ - ti,trm-icp: DLL trim select.
+ - ti,driver-strength-ohm: driver strength in ohms.
+ Valid values are 33, 40, 50, 66, and 100 ohms.
+
+Example:
+ mmc_phy1: mmc_phy@...00 {
+ compatible = "ti,am654-mmc-phy";
+ reg = <0x10100 0x34>;
+ clocks = <&sdhci1>;
+ clock-names = "mmcclk";
+ #phy-cells = <0>;
+ ti,otap-del-sel = <0x2>;
+ ti,trm-icp = <0x8>;
+ status = "disabled";
+ };
+
+Host controller node:
+
+ sdhci1: sdhci@0 {
+ compatible = "ti,am654-sdhci-5.1";
+ reg = <0x0 0x1000>;
+ power-domains = <&k3_pds 48>;
+ clocks = <&k3_clks 48 0>, <&k3_clks 48 1>;
+ clock-names = "clk_ahb", "clk_xin";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clock-output-names = "mmc_cardclck";
+ #clock-cells = <0>;
+ phys=<&mmc_phy1>;
+ phy-names = "phy_arasan";
+ status = "disabled";
+ };
--
2.18.0
Powered by blists - more mailing lists