linux-kernel - [PATCH v6 09/10] dt-binding: mtd: Document gpio-addr-flash

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181004130110.8496-9-ricardo.ribalda@gmail.com>
Date:   Thu,  4 Oct 2018 15:01:09 +0200
From:   Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
To:     David Woodhouse <dwmw2@...radead.org>,
        Brian Norris <computersforpeace@...il.com>,
        Boris Brezillon <boris.brezillon@...tlin.com>,
        Marek Vasut <marek.vasut@...il.com>,
        Richard Weinberger <richard@....at>,
        Zhouyang Jia <jiazhouyang09@...il.com>,
        linux-mtd@...ts.infradead.org,
        open list <linux-kernel@...r.kernel.org>
Cc:     Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>,
        devicetree@...r.kernel.org
Subject: [PATCH v6 09/10] dt-binding: mtd: Document gpio-addr-flash

Add documentation for gpio-addr-flash. This binding allow creating
flash devices that are paged using GPIOs.

Cc: devicetree@...r.kernel.org
Reviewed-by: Rob Herring <robh@...nel.org>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
---
 .../bindings/mtd/mtd,gpio-addr-flash.txt      | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/mtd,gpio-addr-flash.txt

diff --git a/Documentation/devicetree/bindings/mtd/mtd,gpio-addr-flash.txt b/Documentation/devicetree/bindings/mtd/mtd,gpio-addr-flash.txt
new file mode 100644
index 000000000000..304a33880f9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mtd,gpio-addr-flash.txt
@@ -0,0 +1,25 @@
+Memory Mapped flash with some address lines addressed using GPIOs
+
+Handle the case where a flash device is mostly addressed using physical
+line and supplemented by GPIOs.  This way you can hook up say a 8MiB flash
+to a 2MiB memory range and use the GPIOs to select a particular range.
+
+ - compatible :  must be "mtd,gpio-addr-flash", "cfi-flash";
+ - reg : Address range of the mtd chip that is memory mapped, this is,
+   on the previous example 2MiB.
+ - addr-gpios: List of GPIO specifiers that will be used to address the MSBs
+   address lines. The order goes from LSB to MSB.
+
+For the rest of the properties, see mtd-physmap.txt.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. Check partition.txt for more details.
+
+Example:
+
+	flash@...000 {
+		compatible = "mtd,gpio-addr-flash", "cfi-flash";
+		bank-width = <2>;
+		reg = < 0x00300000 0x00200000 >;
+		addr-gpios = <&gpio_0 3 0>, <&gpio_0 4 0>;
+	} ;
-- 
2.19.0