| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1538745782-27446-3-git-send-email-ludovic.Barre@st.com>
Date: Fri, 5 Oct 2018 15:22:40 +0200
From: Ludovic Barre <ludovic.Barre@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>
CC: <srinivas.kandagatla@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-mmc@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Ludovic Barre <ludovic.barre@...com>
Subject: [PATCH V5 02/24] mmc: mmci: create common mmci_dma_setup/release
From: Ludovic Barre <ludovic.barre@...com>
This patch creates a common mmci_dma_setup/release which calls
dma_setup/release callbacks of mmci_host_ops and manages
common features like use_dma... If there is a fallbacks to
pio mode, dma functions must check use_dma.
error management:
-mmci_dmae_setup fail if Tx and Rx dma channels are not defined
-qcom_dma_setup fail if one of both dma channels is not defined,
Qcom has no specific resource to release, just mmci dmae resource.
Signed-off-by: Ludovic Barre <ludovic.barre@...com>
---
drivers/mmc/host/mmci.c | 69 +++++++++++++++++++++++++++++++---------
drivers/mmc/host/mmci.h | 15 ++++++++-
drivers/mmc/host/mmci_qcom_dml.c | 10 ++++--
3 files changed, 76 insertions(+), 18 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index db8c085..07b799c 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -57,6 +57,7 @@ static struct variant_data variant_arm = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
+ .init = mmci_variant_init,
};
static struct variant_data variant_arm_extended_fifo = {
@@ -68,6 +69,7 @@ static struct variant_data variant_arm_extended_fifo = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
+ .init = mmci_variant_init,
};
static struct variant_data variant_arm_extended_fifo_hwfc = {
@@ -80,6 +82,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
+ .init = mmci_variant_init,
};
static struct variant_data variant_u300 = {
@@ -98,6 +101,7 @@ static struct variant_data variant_u300 = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
+ .init = mmci_variant_init,
};
static struct variant_data variant_nomadik = {
@@ -117,6 +121,7 @@ static struct variant_data variant_nomadik = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
+ .init = mmci_variant_init,
};
static struct variant_data variant_ux500 = {
@@ -142,6 +147,7 @@ static struct variant_data variant_ux500 = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
+ .init = mmci_variant_init,
};
static struct variant_data variant_ux500v2 = {
@@ -169,6 +175,7 @@ static struct variant_data variant_ux500v2 = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
+ .init = mmci_variant_init,
};
static struct variant_data variant_stm32 = {
@@ -186,6 +193,7 @@ static struct variant_data variant_stm32 = {
.f_max = 48000000,
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
+ .init = mmci_variant_init,
};
static struct variant_data variant_qcom = {
@@ -356,6 +364,27 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
mmci_write_clkreg(host, clk);
}
+void mmci_dma_release(struct mmci_host *host)
+{
+ if (host->ops && host->ops->dma_release)
+ host->ops->dma_release(host);
+
+ host->use_dma = false;
+}
+
+void mmci_dma_setup(struct mmci_host *host)
+{
+ if (!host->ops || !host->ops->dma_setup)
+ return;
+
+ if (host->ops->dma_setup(host)) {
+ mmci_dma_release(host);
+ return;
+ }
+
+ host->use_dma = true;
+}
+
static void
mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
{
@@ -414,7 +443,7 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
* no custom DMA interfaces are supported.
*/
#ifdef CONFIG_DMA_ENGINE
-static void mmci_dma_setup(struct mmci_host *host)
+int mmci_dmae_setup(struct mmci_host *host)
{
const char *rxname, *txname;
@@ -464,15 +493,17 @@ static void mmci_dma_setup(struct mmci_host *host)
host->mmc->max_seg_size = max_seg_size;
}
- if (host->ops && host->ops->dma_setup)
- host->ops->dma_setup(host);
+ if (!host->dma_tx_channel && !host->dma_rx_channel)
+ return -EINVAL;
+
+ return 0;
}
/*
* This is used in or so inline it
* so it can be discarded.
*/
-static inline void mmci_dma_release(struct mmci_host *host)
+void mmci_dmae_release(struct mmci_host *host)
{
if (host->dma_rx_channel)
dma_release_channel(host->dma_rx_channel);
@@ -496,7 +527,7 @@ static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
static void mmci_dma_data_error(struct mmci_host *host)
{
- if (!dma_inprogress(host))
+ if (!host->use_dma || !dma_inprogress(host))
return;
dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n");
@@ -514,7 +545,7 @@ static void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data)
u32 status;
int i;
- if (!dma_inprogress(host))
+ if (!host->use_dma || !dma_inprogress(host))
return;
/* Wait up to 1ms for the DMA to complete */
@@ -640,6 +671,9 @@ static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl)
int ret;
struct mmc_data *data = host->data;
+ if (!host->use_dma)
+ return -EINVAL;
+
ret = mmci_dma_prep_data(host, host->data);
if (ret)
return ret;
@@ -674,6 +708,9 @@ static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data)
{
struct mmci_host_next *next = &host->next_data;
+ if (!host->use_dma)
+ return;
+
WARN_ON(data->host_cookie && data->host_cookie != next->cookie);
WARN_ON(!data->host_cookie && (next->dma_desc || next->dma_chan));
@@ -689,7 +726,7 @@ static void mmci_pre_request(struct mmc_host *mmc, struct mmc_request *mrq)
struct mmc_data *data = mrq->data;
struct mmci_host_next *nd = &host->next_data;
- if (!data)
+ if (!host->use_dma || !data)
return;
BUG_ON(data->host_cookie);
@@ -707,7 +744,7 @@ static void mmci_post_request(struct mmc_host *mmc, struct mmc_request *mrq,
struct mmci_host *host = mmc_priv(mmc);
struct mmc_data *data = mrq->data;
- if (!data || !data->host_cookie)
+ if (!host->use_dma || !data || !data->host_cookie)
return;
mmci_dma_unmap(host, data);
@@ -735,18 +772,20 @@ static void mmci_post_request(struct mmc_host *mmc, struct mmc_request *mrq,
}
}
+static struct mmci_host_ops mmci_variant_ops = {
+ .dma_setup = mmci_dmae_setup,
+ .dma_release = mmci_dmae_release,
+};
+
+void mmci_variant_init(struct mmci_host *host)
+{
+ host->ops = &mmci_variant_ops;
+}
#else
/* Blank functions if the DMA engine is not available */
static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data)
{
}
-static inline void mmci_dma_setup(struct mmci_host *host)
-{
-}
-
-static inline void mmci_dma_release(struct mmci_host *host)
-{
-}
static inline void mmci_dma_finalize(struct mmci_host *host,
struct mmc_data *data)
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 01e6c6b..9b0a960 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -273,7 +273,8 @@ struct variant_data {
/* mmci variant callbacks */
struct mmci_host_ops {
- void (*dma_setup)(struct mmci_host *host);
+ int (*dma_setup)(struct mmci_host *host);
+ void (*dma_release)(struct mmci_host *host);
};
struct mmci_host_next {
@@ -323,6 +324,7 @@ struct mmci_host {
unsigned int size;
int (*get_rx_fifocnt)(struct mmci_host *h, u32 status, int remain);
+ u8 use_dma:1;
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
struct dma_chan *dma_current;
@@ -336,3 +338,14 @@ struct mmci_host {
#endif
};
+#ifdef CONFIG_DMA_ENGINE
+void mmci_variant_init(struct mmci_host *host);
+#else
+static inline void mmci_variant_init(struct mmci_host *host)
+{
+}
+#endif
+
+int mmci_dmae_setup(struct mmci_host *host);
+void mmci_dmae_release(struct mmci_host *host);
+
diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c
index be3fab5..aa070a9 100644
--- a/drivers/mmc/host/mmci_qcom_dml.c
+++ b/drivers/mmc/host/mmci_qcom_dml.c
@@ -119,19 +119,22 @@ static int of_get_dml_pipe_index(struct device_node *np, const char *name)
}
/* Initialize the dml hardware connected to SD Card controller */
-static void qcom_dma_setup(struct mmci_host *host)
+static int qcom_dma_setup(struct mmci_host *host)
{
u32 config;
void __iomem *base;
int consumer_id, producer_id;
struct device_node *np = host->mmc->parent->of_node;
+ if (mmci_dmae_setup(host))
+ return -EINVAL;
+
consumer_id = of_get_dml_pipe_index(np, "tx");
producer_id = of_get_dml_pipe_index(np, "rx");
if (producer_id < 0 || consumer_id < 0) {
host->variant->qcom_dml = false;
- return;
+ return -EINVAL;
}
base = host->base + DML_OFFSET;
@@ -175,10 +178,13 @@ static void qcom_dma_setup(struct mmci_host *host)
/* Make sure dml initialization is finished */
mb();
+
+ return 0;
}
static struct mmci_host_ops qcom_variant_ops = {
.dma_setup = qcom_dma_setup,
+ .dma_release = mmci_dmae_release,
};
void qcom_variant_init(struct mmci_host *host)
--
2.7.4
Powered by blists - more mailing lists