| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181005165848.3474-12-robh@kernel.org>
Date: Fri, 5 Oct 2018 11:58:23 -0500
From: Rob Herring <robh@...nel.org>
To: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linuxppc-dev@...ts.ozlabs.org
Cc: Grant Likely <glikely@...retlab.ca>,
Kumar Gala <kumar.gala@...aro.org>,
Frank Rowand <frowand.list@...il.com>,
Mark Rutland <mark.rutland@....com>,
Linus Walleij <linus.walleij@...aro.org>,
Olof Johansson <olof@...om.net>, Arnd Bergmann <arnd@...db.de>,
Mark Brown <broonie@...nel.org>, Tom Rini <trini@...sulko.com>,
Pantelis Antoniou <pantelis.antoniou@...sulko.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Jonathan Cameron <jic23@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>
Subject: [PATCH 11/36] dt-bindings: timer: Convert ARM timer bindings to json-schema
Convert ARM timers to DT schema format using json-schema.
Cc: Daniel Lezcano <daniel.lezcano@...aro.org>
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Mark Rutland <mark.rutland@....com>
Cc: devicetree@...r.kernel.org
Signed-off-by: Rob Herring <robh@...nel.org>
---
.../bindings/timer/arm,arch_timer.txt | 112 ----------------
.../bindings/timer/arm,arch_timer.yaml | 103 +++++++++++++++
.../bindings/timer/arm,arch_timer_mmio.yaml | 120 ++++++++++++++++++
.../bindings/timer/arm,global_timer.txt | 27 ----
.../bindings/timer/arm,global_timer.yaml | 46 +++++++
5 files changed, 269 insertions(+), 139 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/timer/arm,arch_timer.txt
create mode 100644 Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
create mode 100644 Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
delete mode 100644 Documentation/devicetree/bindings/timer/arm,global_timer.txt
create mode 100644 Documentation/devicetree/bindings/timer/arm,global_timer.yaml
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.txt b/Documentation/devicetree/bindings/timer/arm,arch_timer.txt
deleted file mode 100644
index 68301b77e854..000000000000
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-* ARM architected timer
-
-ARM cores may have a per-core architected timer, which provides per-cpu timers,
-or a memory mapped architected timer, which provides up to 8 frames with a
-physical and optional virtual timer per frame.
-
-The per-core architected timer is attached to a GIC to deliver its
-per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
-to deliver its interrupts via SPIs.
-
-** CP15 Timer node properties:
-
-- compatible : Should at least contain one of
- "arm,armv7-timer"
- "arm,armv8-timer"
-
-- interrupts : Interrupt list for secure, non-secure, virtual and
- hypervisor timers, in that order.
-
-- clock-frequency : The frequency of the main counter, in Hz. Should be present
- only where necessary to work around broken firmware which does not configure
- CNTFRQ on all CPUs to a uniform correct value. Use of this property is
- strongly discouraged; fix your firmware unless absolutely impossible.
-
-- always-on : a boolean property. If present, the timer is powered through an
- always-on power domain, therefore it never loses context.
-
-- fsl,erratum-a008585 : A boolean property. Indicates the presence of
- QorIQ erratum A-008585, which says that reading the counter is
- unreliable unless the same value is returned by back-to-back reads.
- This also affects writes to the tval register, due to the implicit
- counter read.
-
-- hisilicon,erratum-161010101 : A boolean property. Indicates the
- presence of Hisilicon erratum 161010101, which says that reading the
- counters is unreliable in some cases, and reads may return a value 32
- beyond the correct value. This also affects writes to the tval
- registers, due to the implicit counter read.
-
-** Optional properties:
-
-- arm,cpu-registers-not-fw-configured : Firmware does not initialize
- any of the generic timer CPU registers, which contain their
- architecturally-defined reset values. Only supported for 32-bit
- systems which follow the ARMv7 architected reset values.
-
-- arm,no-tick-in-suspend : The main counter does not tick when the system is in
- low-power system suspend on some SoCs. This behavior does not match the
- Architecture Reference Manual's specification that the system counter "must
- be implemented in an always-on power domain."
-
-
-Example:
-
- timer {
- compatible = "arm,cortex-a15-timer",
- "arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
- clock-frequency = <100000000>;
- };
-
-** Memory mapped timer node properties:
-
-- compatible : Should at least contain "arm,armv7-timer-mem".
-
-- clock-frequency : The frequency of the main counter, in Hz. Should be present
- only when firmware has not configured the MMIO CNTFRQ registers.
-
-- reg : The control frame base address.
-
-Note that #address-cells, #size-cells, and ranges shall be present to ensure
-the CPU can address a frame's registers.
-
-A timer node has up to 8 frame sub-nodes, each with the following properties:
-
-- frame-number: 0 to 7.
-
-- interrupts : Interrupt list for physical and virtual timers in that order.
- The virtual timer interrupt is optional.
-
-- reg : The first and second view base addresses in that order. The second view
- base address is optional.
-
-- status : "disabled" indicates the frame is not available for use. Optional.
-
-Example:
-
- timer@...00000 {
- compatible = "arm,armv7-timer-mem";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- reg = <0xf0000000 0x1000>;
- clock-frequency = <50000000>;
-
- frame@...01000 {
- frame-number = <0>
- interrupts = <0 13 0x8>,
- <0 14 0x8>;
- reg = <0xf0001000 0x1000>,
- <0xf0002000 0x1000>;
- };
-
- frame@...03000 {
- frame-number = <1>
- interrupts = <0 15 0x8>;
- reg = <0xf0003000 0x1000>;
- };
- };
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
new file mode 100644
index 000000000000..733ae2254c65
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: None
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/arm,arch_timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM architected timer
+
+maintainers:
+ - Marc Zyngier <marc.zyngier@....com>
+ - Mark Rutland <mark.rutland@....com>
+description: |+
+ ARM cores may have a per-core architected timer, which provides per-cpu timers,
+ or a memory mapped architected timer, which provides up to 8 frames with a
+ physical and optional virtual timer per frame.
+
+ The per-core architected timer is attached to a GIC to deliver its
+ per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
+ to deliver its interrupts via SPIs.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - arm,cortex-a15-timer
+ - enum:
+ - arm,armv7-timer
+ - items:
+ - enum:
+ - arm,armv7-timer
+ - items:
+ - enum:
+ - arm,armv8-timer
+
+ interrupts:
+ items:
+ - description: secure timer irq
+ - description: non-secure timer irq
+ - description: virtual timer irq
+ - description: hypervisor timer irq
+
+ clock-frequency:
+ description: The frequency of the main counter, in Hz. Should be present
+ only where necessary to work around broken firmware which does not configure
+ CNTFRQ on all CPUs to a uniform correct value. Use of this property is
+ strongly discouraged; fix your firmware unless absolutely impossible.
+
+ always-on:
+ type: boolean
+ description: If present, the timer is powered through an always-on power
+ domain, therefore it never loses context.
+
+ fsl,erratum-a008585:
+ type: boolean
+ description: Indicates the presence of QorIQ erratum A-008585, which says
+ that reading the counter is unreliable unless the same value is returned
+ by back-to-back reads. This also affects writes to the tval register, due
+ to the implicit counter read.
+
+ hisilicon,erratum-161010101:
+ type: boolean
+ description: Indicates the presence of Hisilicon erratum 161010101, which
+ says that reading the counters is unreliable in some cases, and reads may
+ return a value 32 beyond the correct value. This also affects writes to
+ the tval registers, due to the implicit counter read.
+
+ arm,cpu-registers-not-fw-configured:
+ type: boolean
+ description: Firmware does not initialize any of the generic timer CPU
+ registers, which contain their architecturally-defined reset values. Only
+ supported for 32-bit systems which follow the ARMv7 architected reset
+ values.
+
+ arm,no-tick-in-suspend:
+ type: boolean
+ description: The main counter does not tick when the system is in
+ low-power system suspend on some SoCs. This behavior does not match the
+ Architecture Reference Manual's specification that the system counter "must
+ be implemented in an always-on power domain."
+
+required:
+ - compatible
+
+oneOf:
+ - required:
+ - interrupts
+ - required:
+ - interrupts-extended
+
+examples:
+ - |
+ timer {
+ compatible = "arm,cortex-a15-timer",
+ "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ clock-frequency = <100000000>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
new file mode 100644
index 000000000000..34c8ecfea2a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: None
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/arm,arch_timer_mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM memory mapped architected timer
+
+maintainers:
+ - Marc Zyngier <marc.zyngier@....com>
+ - Mark Rutland <mark.rutland@....com>
+
+description: |+
+ ARM cores may have a memory mapped architected timer, which provides up to 8
+ frames with a physical and optional virtual timer per frame.
+
+ The memory mapped timer is attached to a GIC to deliver its interrupts via SPIs.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - arm,armv7-timer-mem
+
+ reg:
+ maxItems: 1
+ description: The control frame base address
+
+ '#address-cells':
+ enum: [1, 2]
+
+ '#size-cells':
+ const: 1
+
+ clock-frequency:
+ description: The frequency of the main counter, in Hz. Should be present
+ only where necessary to work around broken firmware which does not configure
+ CNTFRQ on all CPUs to a uniform correct value. Use of this property is
+ strongly discouraged; fix your firmware unless absolutely impossible.
+
+ always-on:
+ type: boolean
+ description: If present, the timer is powered through an always-on power
+ domain, therefore it never loses context.
+
+ arm,cpu-registers-not-fw-configured:
+ type: boolean
+ description: Firmware does not initialize any of the generic timer CPU
+ registers, which contain their architecturally-defined reset values. Only
+ supported for 32-bit systems which follow the ARMv7 architected reset
+ values.
+
+ arm,no-tick-in-suspend:
+ type: boolean
+ description: The main counter does not tick when the system is in
+ low-power system suspend on some SoCs. This behavior does not match the
+ Architecture Reference Manual's specification that the system counter "must
+ be implemented in an always-on power domain."
+
+patternProperties:
+ '^frame@[0-9a-z]*$':
+ description: A timer node has up to 8 frame sub-nodes, each with the following properties.
+ properties:
+ frame-number:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 7
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: physical timer irq
+ - description: virtual timer irq
+
+ reg :
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: 1st view base address
+ - description: 2nd optional view base address
+
+ required:
+ - frame-number
+ - interrupts
+ - reg
+
+required:
+ - compatible
+ - reg
+ - '#address-cells'
+ - '#size-cells'
+
+examples:
+ - |
+ timer@...00000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0xf0000000 0x1000>;
+ clock-frequency = <50000000>;
+
+ frame@...01000 {
+ frame-number = <0>;
+ interrupts = <0 13 0x8>,
+ <0 14 0x8>;
+ reg = <0xf0001000 0x1000>,
+ <0xf0002000 0x1000>;
+ };
+
+ frame@...03000 {
+ frame-number = <1>;
+ interrupts = <0 15 0x8>;
+ reg = <0xf0003000 0x1000>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.txt b/Documentation/devicetree/bindings/timer/arm,global_timer.txt
deleted file mode 100644
index bdae3a818793..000000000000
--- a/Documentation/devicetree/bindings/timer/arm,global_timer.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-
-* ARM Global Timer
- Cortex-A9 are often associated with a per-core Global timer.
-
-** Timer node required properties:
-
-- compatible : should contain
- * "arm,cortex-a5-global-timer" for Cortex-A5 global timers.
- * "arm,cortex-a9-global-timer" for Cortex-A9 global
- timers or any compatible implementation. Note: driver
- supports versions r2p0 and above.
-
-- interrupts : One interrupt to each core
-
-- reg : Specify the base address and the size of the GT timer
- register window.
-
-- clocks : Should be phandle to a clock.
-
-Example:
-
- timer@...00600 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x2c000600 0x20>;
- interrupts = <1 13 0xf01>;
- clocks = <&arm_periph_clk>;
- };
diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
new file mode 100644
index 000000000000..09090f677387
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: None
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/arm,global_timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Global Timer
+
+maintainers:
+ - Stuart Menefy <stuart.menefy@...com>
+
+description:
+ Cortex-A9 are often associated with a per-core Global timer.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - arm,cortex-a5-global-timer
+ - arm,cortex-a9-global-timer
+
+ description: driver supports versions r2p0 and above.
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+examples:
+ - |
+ timer@...00600 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x2c000600 0x20>;
+ interrupts = <1 13 0xf01>;
+ clocks = <&arm_periph_clk>;
+ };
+...
--
2.17.1
Powered by blists - more mailing lists