| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <3eb65888e2bd0869341732312460d24ee99d8d13.1538760098.git.ek5.chimenti@gmail.com>
Date: Fri, 5 Oct 2018 19:33:59 +0200
From: ektor5 <ek5.chimenti@...il.com>
To: unlisted-recipients:; (no To-header on input)
Cc: hverkuil@...all.nl, luca.pisani@...o.org, jose.abreu@...opsys.com,
sean@...s.org, sakari.ailus@...ux.intel.com,
Ettore Chimenti <ek5.chimenti@...il.com>, jacopo@...ndi.org,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"David S. Miller" <davem@...emloft.net>,
Andrew Morton <akpm@...ux-foundation.org>,
Arnd Bergmann <arnd@...db.de>,
Hans Verkuil <hans.verkuil@...co.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Jacob Chen <jacob-chen@...wrt.com>,
Thomas Gleixner <tglx@...utronix.de>,
Kate Stewart <kstewart@...uxfoundation.org>,
Neil Armstrong <narmstrong@...libre.com>,
Todor Tomov <todor.tomov@...aro.org>,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org
Subject: [PATCH v2 2/2] seco-cec: add Consumer-IR support
From: Ettore Chimenti <ek5.chimenti@...il.com>
Introduce support for Consumer-IR into seco-cec driver, as it shares the
same interrupt for receiving messages.
The device decodes RC5 signals only, defaults to hauppauge mapping.
It will spawn an input interface using the RC framework (like CEC
device).
Signed-off-by: Ettore Chimenti <ek5.chimenti@...il.com>
---
drivers/media/platform/Kconfig | 10 ++
drivers/media/platform/seco-cec/seco-cec.c | 125 ++++++++++++++++++++-
drivers/media/platform/seco-cec/seco-cec.h | 11 ++
3 files changed, 145 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 51cd1fd005e3..e6b45da2af6d 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -625,6 +625,16 @@ config VIDEO_SECO_CEC
CEC bus is present in the HDMI connector and enables communication
between compatible devices.
+config VIDEO_SECO_RC
+ bool "SECO Boards IR RC5 support"
+ depends on VIDEO_SECO_CEC
+ select RC_CORE
+ help
+ If you say yes here you will get support for the
+ SECO Boards Consumer-IR in seco-cec driver.
+ The embedded controller supports RC5 protocol only, default mapping
+ is set to rc-hauppauge.
+
endif #CEC_PLATFORM_DRIVERS
menuconfig SDR_PLATFORM_DRIVERS
diff --git a/drivers/media/platform/seco-cec/seco-cec.c b/drivers/media/platform/seco-cec/seco-cec.c
index 990e88f979a2..6ae42fc855ef 100644
--- a/drivers/media/platform/seco-cec/seco-cec.c
+++ b/drivers/media/platform/seco-cec/seco-cec.c
@@ -26,6 +26,8 @@ struct secocec_data {
struct platform_device *pdev;
struct cec_adapter *cec_adap;
struct cec_notifier *notifier;
+ struct rc_dev *ir;
+ char ir_input_phys[32];
int irq;
};
@@ -371,6 +373,114 @@ struct cec_adap_ops secocec_cec_adap_ops = {
.adap_transmit = secocec_adap_transmit,
};
+#ifdef CONFIG_VIDEO_SECO_RC
+static int secocec_ir_probe(void *priv)
+{
+ struct secocec_data *cec = priv;
+ struct device *dev = cec->dev;
+ int status;
+ u16 val;
+
+ /* Prepare the RC input device */
+ cec->ir = devm_rc_allocate_device(dev, RC_DRIVER_SCANCODE);
+ if (!cec->ir)
+ return -ENOMEM;
+
+ snprintf(cec->ir_input_phys, sizeof(cec->ir_input_phys),
+ "%s/input0", dev_name(dev));
+
+ cec->ir->device_name = dev_name(dev);
+ cec->ir->input_phys = cec->ir_input_phys;
+ cec->ir->input_id.bustype = BUS_HOST;
+ cec->ir->input_id.vendor = 0;
+ cec->ir->input_id.product = 0;
+ cec->ir->input_id.version = 1;
+ cec->ir->driver_name = SECOCEC_DEV_NAME;
+ cec->ir->allowed_protocols = RC_PROTO_BIT_RC5;
+ cec->ir->priv = cec;
+ cec->ir->map_name = RC_MAP_HAUPPAUGE;
+ cec->ir->timeout = MS_TO_NS(100);
+
+ /* Clear the status register */
+ status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+ if (status != 0)
+ goto err;
+
+ status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+ if (status != 0)
+ goto err;
+
+ /* Enable the interrupts */
+ status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+ if (status != 0)
+ goto err;
+
+ status = smb_wr16(SECOCEC_ENABLE_REG_1,
+ val | SECOCEC_ENABLE_REG_1_IR);
+ if (status != 0)
+ goto err;
+
+ dev_dbg(dev, "IR enabled");
+
+ status = devm_rc_register_device(dev, cec->ir);
+
+ if (status) {
+ dev_err(dev, "Failed to prepare input device");
+ cec->ir = NULL;
+ goto err;
+ }
+
+ return 0;
+
+err:
+ smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+
+ smb_wr16(SECOCEC_ENABLE_REG_1,
+ val & ~SECOCEC_ENABLE_REG_1_IR);
+
+ dev_dbg(dev, "IR disabled");
+ return status;
+}
+
+static int secocec_ir_rx(struct secocec_data *priv)
+{
+ struct secocec_data *cec = priv;
+ struct device *dev = cec->dev;
+ u16 val, status, key, addr, toggle;
+
+ if (!cec->ir)
+ return -ENODEV;
+
+ status = smb_rd16(SECOCEC_IR_READ_DATA, &val);
+ if (status != 0)
+ goto err;
+
+ key = val & SECOCEC_IR_COMMAND_MASK;
+ addr = (val & SECOCEC_IR_ADDRESS_MASK) >> SECOCEC_IR_ADDRESS_SHL;
+ toggle = (val & SECOCEC_IR_TOGGLE_MASK) >> SECOCEC_IR_TOGGLE_SHL;
+
+ rc_keydown(cec->ir, RC_PROTO_RC5, RC_SCANCODE_RC5(addr, key), toggle);
+
+ dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x", key,
+ addr, toggle);
+
+ return 0;
+
+err:
+ dev_err(dev, "IR Receive message failed (%d)", status);
+ return -EIO;
+}
+#else
+static void secocec_ir_rx(struct secocec_data *priv)
+{
+}
+
+static int secocec_ir_probe(void *priv)
+{
+ return 0;
+}
+#endif
+
static irqreturn_t secocec_irq_handler(int irq, void *priv)
{
struct secocec_data *cec = priv;
@@ -406,7 +516,8 @@ static irqreturn_t secocec_irq_handler(int irq, void *priv)
if (status_val & SECOCEC_STATUS_REG_1_IR) {
dev_dbg(dev, "IR RC5 Interrupt Caught");
val |= SECOCEC_STATUS_REG_1_IR;
- /* TODO IRDA RX */
+
+ secocec_ir_rx(cec);
}
/* Reset status register */
@@ -576,6 +687,10 @@ static int secocec_probe(struct platform_device *pdev)
if (secocec->notifier)
cec_register_cec_notifier(secocec->cec_adap, secocec->notifier);
+ ret = secocec_ir_probe(secocec);
+ if (ret)
+ goto err_delete_adapter;
+
platform_set_drvdata(pdev, secocec);
dev_dbg(dev, "Device registered");
@@ -593,7 +708,15 @@ static int secocec_probe(struct platform_device *pdev)
static int secocec_remove(struct platform_device *pdev)
{
struct secocec_data *secocec = platform_get_drvdata(pdev);
+ u16 val;
+
+ if (secocec->ir) {
+ smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+ smb_wr16(SECOCEC_ENABLE_REG_1, val & ~SECOCEC_ENABLE_REG_1_IR);
+
+ dev_dbg(&pdev->dev, "IR disabled");
+ }
cec_unregister_adapter(secocec->cec_adap);
if (secocec->notifier)
diff --git a/drivers/media/platform/seco-cec/seco-cec.h b/drivers/media/platform/seco-cec/seco-cec.h
index 93020900935e..3f1aad89b073 100644
--- a/drivers/media/platform/seco-cec/seco-cec.h
+++ b/drivers/media/platform/seco-cec/seco-cec.h
@@ -99,6 +99,17 @@
#define SECOCEC_IR_READ_DATA 0x3e
+/*
+ * IR
+ */
+
+#define SECOCEC_IR_COMMAND_MASK 0x007F
+#define SECOCEC_IR_COMMAND_SHL 0
+#define SECOCEC_IR_ADDRESS_MASK 0x1F00
+#define SECOCEC_IR_ADDRESS_SHL 7
+#define SECOCEC_IR_TOGGLE_MASK 0x8000
+#define SECOCEC_IR_TOGGLE_SHL 15
+
/*
* Enabling register
*/
--
2.18.0
Powered by blists - more mailing lists