linux-kernel - Re: [PATCH v4] dt-binding: remoteproc: Add QTI ADSP PIL bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20181006065508.GK12063@builder>
Date:   Fri, 5 Oct 2018 23:55:08 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Rohit kumar <rohitkr@...eaurora.org>
Cc:     ohad@...ery.com, robh+dt@...nel.org, mark.rutland@....com,
        linux-remoteproc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, plai@...eaurora.org,
        bgoswami@...eaurora.org, rohkumar@....qualcomm.com
Subject: Re: [PATCH v4] dt-binding: remoteproc: Add QTI ADSP PIL bindings

On Mon 10 Sep 20:54 PDT 2018, Rohit kumar wrote:
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt
[..]
> += EXAMPLE
> +The following example describes the resources needed to boot control the
> +ADSP, as it is found on SDM845 boards.
> +	adsp-pil {

Updated this to remoteproc@...00000 and applied the patch to rproc-next.

Regards,
Bjorn

> +		compatible = "qcom,sdm845-adsp-pil";
> +
> +		reg = <0x17300000 0x40c>;
> +
> +		interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
> +			<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +			<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +			<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +			<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-names = "wdog", "fatal", "ready",
> +			"handover", "stop-ack";
> +
> +		clocks = <&rpmhcc RPMH_CXO_CLK>,
> +			<&gcc GCC_LPASS_SWAY_CLK>,
> +			<&lpasscc LPASS_AUDIO_WRAPPER_AON_CLK>,
> +			<&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
> +			<&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
> +			<&lpasscc LPASS_QDSP6SS_XO_CLK>,
> +			<&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
> +			<&lpasscc LPASS_QDSP6SS_CORE_CLK>;
> +		clock-names = "xo", "sway_cbcr", "lpass_aon",
> +			"lpass_ahbs_aon_cbcr",
> +			"lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
> +			"qdsp6ss_sleep", "qdsp6ss_core";
> +
> +		power-domains = <&rpmhpd SDM845_CX>;
> +
> +		resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> +			 <&aoss_reset AOSS_CC_LPASS_RESTART>;
> +		reset-names = "pdc_sync", "cc_lpass";
> +
> +		qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
> +
> +		memory-region = <&pil_adsp_mem>;
> +
> +		qcom,smem-states = <&adsp_smp2p_out 0>;
> +		qcom,smem-state-names = "stop";
> +	};