Message-Id: <1538965532-8908-2-git-send-email-masonccyang@mxic.com.tw>
Date:   Mon,  8 Oct 2018 10:25:31 +0800
From:   masonccyang@...c.com.tw
To:     broonie@...nel.org, tpiepho@...inj.com,
        linux-kernel@...r.kernel.org, linux-spi@...r.kernel.org
Cc:     boris.brezillon@...tlin.com, juliensu@...c.com.tw,
        zhengxunli@...c.com.tw, masonccyang@...c.com.tw
Subject: [PATCH v4 1/2] spi: Add MXIC controller driver

From: Mason Yang <masonccyang@...c.com.tw>

Add a driver for Macronix SPI controller IP.

Signed-off-by: Mason Yang <masonccyang@...c.com.tw>
---
 drivers/spi/Kconfig    |   6 +
 drivers/spi/Makefile   |   1 +
 drivers/spi/spi-mxic.c | 639 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 646 insertions(+)
 create mode 100644 drivers/spi/spi-mxic.c

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ad5d68e..7e900b5 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -633,6 +633,12 @@ config SPI_SUN6I
 	help
 	  This enables using the SPI controller on the Allwinner A31 SoCs.
 
+config SPI_MXIC
+        tristate "Macronix MX25F0A SPI controller"
+        depends on SPI_MASTER
+        help
+          This selects the Macronix MX25F0A SPI controller driver.
+
 config SPI_MXS
 	tristate "Freescale MXS SPI controller"
 	depends on ARCH_MXS
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index cb1f437..d7a1ceb 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC)		+= spi-mpc512x-psc.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)		+= spi-mpc52xx-psc.o
 obj-$(CONFIG_SPI_MPC52xx)		+= spi-mpc52xx.o
 obj-$(CONFIG_SPI_MT65XX)                += spi-mt65xx.o
+obj-$(CONFIG_SPI_MXIC)			+= spi-mxic.o
 obj-$(CONFIG_SPI_MXS)			+= spi-mxs.o
 obj-$(CONFIG_SPI_NUC900)		+= spi-nuc900.o
 obj-$(CONFIG_SPI_OC_TINY)		+= spi-oc-tiny.o
diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c
new file mode 100644
index 0000000..9ba57aa
--- /dev/null
+++ b/drivers/spi/spi-mxic.c
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 Macronix International Co., Ltd.
+//
+// Authors:
+//	Mason Yang <masonccyang@...c.com.tw>
+//	zhengxunli <zhengxunli@...c.com.tw>
+//	Boris Brezillon <boris.brezillon@...tlin.com>
+//
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#define HC_CFG			0x0
+#define HC_CFG_IF_CFG(x)	((x) << 27)
+#define HC_CFG_DUAL_SLAVE	BIT(31)
+#define HC_CFG_INDIVIDUAL	BIT(30)
+#define HC_CFG_NIO(x)		(((x) / 4) << 27)
+#define HC_CFG_TYPE(s, t)	((t) << (23 + ((s) * 2)))
+#define HC_CFG_TYPE_SPI_NOR	0
+#define HC_CFG_TYPE_SPI_NAND	1
+#define HC_CFG_TYPE_SPI_RAM	2
+#define HC_CFG_TYPE_RAW_NAND	3
+#define HC_CFG_SLV_ACT(x)	((x) << 21)
+#define HC_CFG_CLK_PH_EN	BIT(20)
+#define HC_CFG_CLK_POL_INV	BIT(19)
+#define HC_CFG_BIG_ENDIAN	BIT(18)
+#define HC_CFG_DATA_PASS	BIT(17)
+#define HC_CFG_IDLE_SIO_LVL(x)	((x) << 16)
+#define HC_CFG_MAN_START_EN	BIT(3)
+#define HC_CFG_MAN_START	BIT(2)
+#define HC_CFG_MAN_CS_EN	BIT(1)
+#define HC_CFG_MAN_CS_ASSERT	BIT(0)
+
+#define INT_STS			0x4
+#define INT_STS_EN		0x8
+#define INT_SIG_EN		0xc
+#define INT_STS_ALL		GENMASK(31, 0)
+#define INT_RDY_PIN		BIT(26)
+#define INT_RDY_SR		BIT(25)
+#define INT_LNR_SUSP		BIT(24)
+#define INT_ECC_ERR		BIT(17)
+#define INT_CRC_ERR		BIT(16)
+#define INT_LWR_DIS		BIT(12)
+#define INT_LRD_DIS		BIT(11)
+#define INT_SDMA_INT		BIT(10)
+#define INT_DMA_FINISH		BIT(9)
+#define INT_RX_NOT_FULL		BIT(3)
+#define INT_RX_NOT_EMPTY	BIT(2)
+#define INT_TX_NOT_FULL		BIT(1)
+#define INT_TX_EMPTY		BIT(0)
+
+#define HC_EN			0x10
+#define HC_EN_BIT		BIT(0)
+
+#define TXD(x)			(0x14 + ((x) * 4))
+#define RXD			0x24
+
+#define SS_CTRL(s)		(0x30 + ((s) * 4))
+#define LRD_CFG			0x44
+#define LWR_CFG			0x80
+#define RWW_CFG			0x70
+#define OP_READ			BIT(23)
+#define OP_DUMMY_CYC(x)		((x) << 17)
+#define OP_ADDR_BYTES(x)	((x) << 14)
+#define OP_CMD_BYTES(x)		(((x) - 1) << 13)
+#define OP_OCTA_CRC_EN		BIT(12)
+#define OP_DQS_EN		BIT(11)
+#define OP_ENHC_EN		BIT(10)
+#define OP_PREAMBLE_EN		BIT(9)
+#define OP_DATA_DDR		BIT(8)
+#define OP_DATA_BUSW(x)		((x) << 6)
+#define OP_ADDR_DDR		BIT(5)
+#define OP_ADDR_BUSW(x)		((x) << 3)
+#define OP_CMD_DDR		BIT(2)
+#define OP_CMD_BUSW(x)		(x)
+#define OP_BUSW_1		0
+#define OP_BUSW_2		1
+#define OP_BUSW_4		2
+#define OP_BUSW_8		3
+
+#define OCTA_CRC		0x38
+#define OCTA_CRC_IN_EN(s)	BIT(3 + ((s) * 16))
+#define OCTA_CRC_CHUNK(s, x)	((fls((x) / 32)) << (1 + ((s) * 16)))
+#define OCTA_CRC_OUT_EN(s)	BIT(0 + ((s) * 16))
+
+#define ONFI_DIN_CNT(s)		(0x3c + (s))
+
+#define LRD_CTRL		0x48
+#define RWW_CTRL		0x74
+#define LWR_CTRL		0x84
+#define LMODE_EN		BIT(31)
+#define LMODE_SLV_ACT(x)	((x) << 21)
+#define LMODE_CMD1(x)		((x) << 8)
+#define LMODE_CMD0(x)		(x)
+
+#define LRD_ADDR		0x4c
+#define LWR_ADDR		0x88
+#define LRD_RANGE		0x50
+#define LWR_RANGE		0x8c
+
+#define AXI_SLV_ADDR		0x54
+
+#define DMAC_RD_CFG		0x58
+#define DMAC_WR_CFG		0x94
+#define DMAC_CFG_PERIPH_EN	BIT(31)
+#define DMAC_CFG_ALLFLUSH_EN	BIT(30)
+#define DMAC_CFG_LASTFLUSH_EN	BIT(29)
+#define DMAC_CFG_QE(x)		(((x) + 1) << 16)
+#define DMAC_CFG_BURST_LEN(x)	(((x) + 1) << 12)
+#define DMAC_CFG_BURST_SZ(x)	((x) << 8)
+#define DMAC_CFG_DIR_READ	BIT(1)
+#define DMAC_CFG_START		BIT(0)
+
+#define DMAC_RD_CNT		0x5c
+#define DMAC_WR_CNT		0x98
+
+#define SDMA_ADDR		0x60
+
+#define DMAM_CFG		0x64
+#define DMAM_CFG_START		BIT(31)
+#define DMAM_CFG_CONT		BIT(30)
+#define DMAM_CFG_SDMA_GAP(x)	(fls((x) / 8192) << 2)
+#define DMAM_CFG_DIR_READ	BIT(1)
+#define DMAM_CFG_EN		BIT(0)
+
+#define DMAM_CNT		0x68
+
+#define LNR_TIMER_TH		0x6c
+
+#define RDM_CFG0		0x78
+#define RDM_CFG0_POLY(x)	(x)
+
+#define RDM_CFG1		0x7c
+#define RDM_CFG1_RDM_EN		BIT(31)
+#define RDM_CFG1_SEED(x)	(x)
+
+#define LWR_SUSP_CTRL		0x90
+#define LWR_SUSP_CTRL_EN	BIT(31)
+
+#define DMAS_CTRL		0x9c
+#define DMAS_CTRL_DIR_READ	BIT(31)
+#define DMAS_CTRL_EN		BIT(30)
+
+#define DATA_STROB		0xa0
+#define DATA_STROB_EDO_EN	BIT(2)
+#define DATA_STROB_INV_POL	BIT(1)
+#define DATA_STROB_DELAY_2CYC	BIT(0)
+
+#define IDLY_CODE(x)		(0xa4 + ((x) * 4))
+#define IDLY_CODE_VAL(x, v)	((v) << (((x) % 4) * 8))
+
+#define GPIO			0xc4
+#define GPIO_PT(x)		BIT(3 + ((x) * 16))
+#define GPIO_RESET(x)		BIT(2 + ((x) * 16))
+#define GPIO_HOLDB(x)		BIT(1 + ((x) * 16))
+#define GPIO_WPB(x)		BIT((x) * 16)
+
+#define HC_VER			0xd0
+
+#define HW_TEST(x)		(0xe0 + ((x) * 4))
+
+struct mxic_spi {
+	struct clk *ps_clk;
+	struct clk *send_clk;
+	struct clk *send_dly_clk;
+	void __iomem *regs;
+	u32 cur_speed_hz;
+};
+
+static int mxic_spi_clk_enable(struct mxic_spi *mxic)
+{
+	int ret;
+
+	ret = clk_prepare_enable(mxic->send_clk);
+	if (ret)
+		goto out;
+
+	ret = clk_prepare_enable(mxic->send_dly_clk);
+	if (ret)
+		goto err_send_dly_clk;
+
+	return ret;
+
+err_send_dly_clk:
+	clk_disable_unprepare(mxic->send_clk);
+out:
+	return ret;
+}
+
+static void mxic_spi_clk_disable(struct mxic_spi *mxic)
+{
+	clk_disable_unprepare(mxic->send_clk);
+	clk_disable_unprepare(mxic->send_dly_clk);
+}
+
+static void mxic_spi_hw_init(struct mxic_spi *mxic)
+{
+	writel(0, mxic->regs + DATA_STROB);
+	writel(INT_STS_ALL, mxic->regs + INT_STS_EN);
+	writel(0, mxic->regs + HC_EN);
+	writel(0, mxic->regs + LRD_CFG);
+	writel(0, mxic->regs + LRD_CTRL);
+	writel(HC_CFG_NIO(1) | HC_CFG_TYPE(0, HC_CFG_TYPE_SPI_NAND) |
+	       HC_CFG_SLV_ACT(0) | HC_CFG_MAN_CS_EN | HC_CFG_IDLE_SIO_LVL(1),
+	       mxic->regs + HC_CFG);
+}
+
+static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf,
+			      void *rxbuf, unsigned int len)
+{
+	unsigned int pos = 0;
+
+	while (pos < len) {
+		unsigned int nbytes = len - pos;
+		u32 data = 0xffffffff;
+		u32 sts;
+		int ret;
+
+		if (nbytes > 4)
+			nbytes = 4;
+
+		if (txbuf)
+			memcpy(&data, txbuf + pos, nbytes);
+
+		ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+					 sts & INT_TX_EMPTY, 0, USEC_PER_SEC);
+		if (ret)
+			return ret;
+
+		writel(data, mxic->regs + TXD(nbytes % 4));
+
+		if (rxbuf) {
+			ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+						 sts & INT_TX_EMPTY, 0,
+						 USEC_PER_SEC);
+			if (ret)
+				return ret;
+
+			ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+						 sts & INT_RX_NOT_EMPTY, 0,
+						 USEC_PER_SEC);
+			if (ret)
+				return ret;
+
+			data = readl(mxic->regs + RXD);
+			data >>= (8 * (4 - nbytes));
+			memcpy(rxbuf + pos, &data, nbytes);
+			WARN_ON(readl(mxic->regs + INT_STS) & INT_RX_NOT_EMPTY);
+		} else {
+			readl(mxic->regs + RXD);
+		}
+		WARN_ON(readl(mxic->regs + INT_STS) & INT_RX_NOT_EMPTY);
+
+		pos += nbytes;
+	}
+
+	return 0;
+}
+
+static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
+				     const struct spi_mem_op *op)
+{
+	if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
+	    op->dummy.buswidth > 4 || op->cmd.buswidth > 4)
+		return false;
+
+	if (op->data.nbytes && op->dummy.nbytes &&
+	    op->data.buswidth != op->dummy.buswidth)
+		return false;
+
+	if (op->addr.nbytes > 7)
+		return false;
+
+	return true;
+}
+
+static int mxic_spi_mem_exec_op(struct spi_mem *mem,
+				const struct spi_mem_op *op)
+{
+	struct spi_master *master = spi_master_get(mem->spi->master);
+	struct mxic_spi *mxic = spi_master_get_devdata(mem->spi->master);
+	int nio = 1, i, ret;
+	u32 ss_ctrl;
+	u8 addr[8];
+
+	if (master->prepare_transfer_hardware)
+		master->prepare_transfer_hardware(master);
+
+	if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD))
+		nio = 4;
+	else if (mem->spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL))
+		nio = 2;
+
+	writel(HC_CFG_NIO(nio) |
+	       HC_CFG_TYPE(mem->spi->chip_select, HC_CFG_TYPE_SPI_NOR) |
+	       HC_CFG_SLV_ACT(mem->spi->chip_select) | HC_CFG_IDLE_SIO_LVL(1) |
+	       HC_CFG_MAN_CS_EN,
+	       mxic->regs + HC_CFG);
+	writel(HC_EN_BIT, mxic->regs + HC_EN);
+
+	ss_ctrl = OP_CMD_BYTES(1) | OP_CMD_BUSW(fls(op->cmd.buswidth) - 1);
+
+	if (op->addr.nbytes)
+		ss_ctrl |= OP_ADDR_BYTES(op->addr.nbytes) |
+			   OP_ADDR_BUSW(fls(op->addr.buswidth) - 1);
+
+	if (op->dummy.nbytes)
+		ss_ctrl |= OP_DUMMY_CYC(op->dummy.nbytes);
+
+	if (op->data.nbytes) {
+		ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1);
+		if (op->data.dir == SPI_MEM_DATA_IN)
+			ss_ctrl |= OP_READ;
+	}
+
+	writel(ss_ctrl, mxic->regs + SS_CTRL(mem->spi->chip_select));
+
+	writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT,
+	       mxic->regs + HC_CFG);
+
+	ret = mxic_spi_data_xfer(mxic, &op->cmd.opcode, NULL, 1);
+	if (ret)
+		goto out;
+
+	for (i = 0; i < op->addr.nbytes; i++)
+		addr[i] = op->addr.val >> (8 * (op->addr.nbytes - i - 1));
+
+	ret = mxic_spi_data_xfer(mxic, addr, NULL, op->addr.nbytes);
+	if (ret)
+		goto out;
+
+	ret = mxic_spi_data_xfer(mxic, NULL, NULL, op->dummy.nbytes);
+	if (ret)
+		goto out;
+
+	ret = mxic_spi_data_xfer(mxic,
+				 op->data.dir == SPI_MEM_DATA_OUT ?
+				 op->data.buf.out : NULL,
+				 op->data.dir == SPI_MEM_DATA_IN ?
+				 op->data.buf.in : NULL,
+				 op->data.nbytes);
+
+out:
+	writel(readl(mxic->regs + HC_CFG) & ~HC_CFG_MAN_CS_ASSERT,
+	       mxic->regs + HC_CFG);
+	writel(0, mxic->regs + HC_EN);
+
+	return ret;
+}
+
+static const struct spi_controller_mem_ops mxic_spi_mem_ops = {
+	.supports_op = mxic_spi_mem_supports_op,
+	.exec_op = mxic_spi_mem_exec_op,
+};
+
+static void mxic_spi_set_cs(struct spi_device *spi, bool lvl)
+{
+	struct mxic_spi *mxic = spi_master_get_devdata(spi->master);
+
+	if (!lvl) {
+		writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_EN,
+		       mxic->regs + HC_CFG);
+		writel(HC_EN_BIT, mxic->regs + HC_EN);
+		writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT,
+		       mxic->regs + HC_CFG);
+	} else {
+		writel(readl(mxic->regs + HC_CFG) & ~HC_CFG_MAN_CS_ASSERT,
+		       mxic->regs + HC_CFG);
+		writel(0, mxic->regs + HC_EN);
+	}
+}
+
+static int mxic_spi_transfer_one(struct spi_master *master,
+				 struct spi_device *spi,
+				 struct spi_transfer *t)
+{
+	struct mxic_spi *mxic = spi_master_get_devdata(master);
+	unsigned int busw = OP_BUSW_1;
+	int ret;
+
+	if (t->rx_buf && t->tx_buf) {
+		if (((spi->mode & SPI_TX_QUAD) &&
+		     !(spi->mode & SPI_RX_QUAD)) ||
+		    ((spi->mode & SPI_TX_DUAL) &&
+		     !(spi->mode & SPI_RX_DUAL)))
+			return -ENOTSUPP;
+	}
+
+	if (t->tx_buf) {
+		if (spi->mode & SPI_TX_QUAD)
+			busw = OP_BUSW_4;
+		else if (spi->mode & SPI_TX_DUAL)
+			busw = OP_BUSW_2;
+	} else if (t->rx_buf) {
+		if (spi->mode & SPI_RX_QUAD)
+			busw = OP_BUSW_4;
+		else if (spi->mode & SPI_RX_DUAL)
+			busw = OP_BUSW_2;
+	}
+
+	writel(OP_CMD_BYTES(1) | OP_CMD_BUSW(busw) |
+	       OP_DATA_BUSW(busw) | (t->rx_buf ? OP_READ : 0),
+	       mxic->regs + SS_CTRL(0));
+
+	ret = mxic_spi_data_xfer(mxic, t->tx_buf, t->rx_buf, t->len);
+	if (ret)
+		return ret;
+
+	spi_finalize_current_transfer(master);
+
+	return 0;
+}
+
+static void mxic_spi_set_input_delay_dqs(struct mxic_spi *mxic, u8 idly_code)
+{
+	writel(IDLY_CODE_VAL(0, idly_code) |
+	       IDLY_CODE_VAL(1, idly_code) |
+	       IDLY_CODE_VAL(2, idly_code) |
+	       IDLY_CODE_VAL(3, idly_code),
+	       mxic->regs + IDLY_CODE(0));
+	writel(IDLY_CODE_VAL(4, idly_code) |
+	       IDLY_CODE_VAL(5, idly_code) |
+	       IDLY_CODE_VAL(6, idly_code) |
+	       IDLY_CODE_VAL(7, idly_code),
+	       mxic->regs + IDLY_CODE(1));
+}
+
+static int mxic_spi_setup(struct spi_device *spi)
+{
+	struct mxic_spi *mxic = spi_master_get_devdata(spi->master);
+
+	mxic->cur_speed_hz = spi->max_speed_hz;
+
+	return 0;
+}
+
+static int mxic_spi_clk_setup(struct mxic_spi *mxic, unsigned long freq)
+{
+	int ret;
+
+	ret = clk_set_rate(mxic->send_clk, freq);
+	if (ret)
+		return ret;
+
+	ret = clk_set_rate(mxic->send_dly_clk, freq);
+	if (ret)
+		return ret;
+
+	/*
+	 * A constant delay range from 0x0 ~ 0x1F for input delay,
+	 * the unit is 78 ps, the max input delay is 2.418 ns.
+	 */
+	mxic_spi_set_input_delay_dqs(mxic, 0xf);
+
+	/*
+	 * Phase degree = 360 * freq * output-delay
+	 * where output-delay is a constant value 1 ns in FPGA.
+	 *
+	 * Get Phase degree = 360 * freq * 1 ns
+	 *                  = 360 * freq * 1 sec / 1000000000
+	 *                  = 9 * freq / 25000000
+	 */
+	ret = clk_set_phase(mxic->send_dly_clk, 9 * freq / 25000000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mxic_spi_clk_check(struct spi_master *master)
+{
+	struct mxic_spi *mxic = spi_master_get_devdata(master);
+	int ret = 0;
+
+	if (mxic->cur_speed_hz != master->max_speed_hz) {
+		mxic_spi_clk_disable(mxic);
+		master->max_speed_hz = mxic->cur_speed_hz;
+		ret = mxic_spi_clk_setup(mxic, master->max_speed_hz);
+		if (ret)
+			return ret;
+
+		ret = mxic_spi_clk_enable(mxic);
+	}
+
+	return ret;
+}
+
+static int mxic_prepare_transfer_hardware(struct spi_master *master)
+{
+	return mxic_spi_clk_check(master);
+}
+
+static int mxic_unprepare_transfer_hardware(struct spi_master *master)
+{
+	return 0;
+}
+
+static int __maybe_unused mxic_spi_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct mxic_spi *mxic = spi_master_get_devdata(master);
+
+	mxic_spi_clk_disable(mxic);
+	clk_disable_unprepare(mxic->ps_clk);
+
+	return 0;
+}
+
+static int __maybe_unused mxic_spi_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct mxic_spi *mxic = spi_master_get_devdata(master);
+	int ret;
+
+	ret = clk_prepare_enable(mxic->ps_clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable ps_clock.\n");
+		return ret;
+	}
+
+	return mxic_spi_clk_enable(mxic);
+}
+
+static const struct dev_pm_ops mxic_spi_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(mxic_spi_runtime_suspend,
+			   mxic_spi_runtime_resume, NULL)
+};
+
+static int mxic_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct resource *res;
+	struct mxic_spi *mxic;
+	int ret;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct mxic_spi));
+	if (!master)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, master);
+
+	mxic = spi_master_get_devdata(master);
+
+	master->dev.of_node = pdev->dev.of_node;
+
+	mxic->ps_clk = devm_clk_get(&pdev->dev, "ps_clk");
+	if (IS_ERR(mxic->ps_clk))
+		return PTR_ERR(mxic->ps_clk);
+
+	mxic->send_clk = devm_clk_get(&pdev->dev, "send_clk");
+	if (IS_ERR(mxic->send_clk))
+		return PTR_ERR(mxic->send_clk);
+
+	mxic->send_dly_clk = devm_clk_get(&pdev->dev, "send_dly_clk");
+	if (IS_ERR(mxic->send_dly_clk))
+		return PTR_ERR(mxic->send_dly_clk);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	mxic->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mxic->regs))
+		return PTR_ERR(mxic->regs);
+
+	pm_runtime_enable(&pdev->dev);
+	master->auto_runtime_pm = true;
+
+	master->num_chipselect = 1;
+	master->setup = mxic_spi_setup;
+	master->mem_ops = &mxic_spi_mem_ops;
+
+	master->set_cs = mxic_spi_set_cs;
+	master->transfer_one = mxic_spi_transfer_one;
+	master->prepare_transfer_hardware = mxic_prepare_transfer_hardware;
+	master->unprepare_transfer_hardware = mxic_unprepare_transfer_hardware;
+	master->bits_per_word_mask = SPI_BPW_MASK(8);
+	master->mode_bits = SPI_CPOL | SPI_CPHA |
+			SPI_RX_DUAL | SPI_TX_DUAL |
+			SPI_RX_QUAD | SPI_TX_QUAD;
+
+	mxic_spi_hw_init(mxic);
+
+	ret = spi_register_master(master);
+	if (ret) {
+		dev_err(&pdev->dev, "spi_register_master failed\n");
+		goto err_put_master;
+	}
+
+	return 0;
+
+err_put_master:
+	spi_master_put(master);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int mxic_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct mxic_spi *mxic = spi_master_get_devdata(master);
+
+	mxic_spi_clk_disable(mxic);
+	clk_disable_unprepare(mxic->ps_clk);
+	pm_runtime_disable(&pdev->dev);
+
+	spi_unregister_master(master);
+
+	return 0;
+}
+
+static const struct of_device_id mxic_spi_of_ids[] = {
+	{ .compatible = "mxicy,mx25f0a-spi", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxic_spi_of_ids);
+
+static struct platform_driver mxic_spi_driver = {
+	.probe = mxic_spi_probe,
+	.remove = mxic_spi_remove,
+	.driver = {
+		.name = "mxic-spi",
+		.of_match_table = mxic_spi_of_ids,
+		.pm = &mxic_spi_dev_pm_ops,
+	},
+};
+module_platform_driver(mxic_spi_driver);
+
+MODULE_AUTHOR("Mason Yang <masonccyang@...c.com.tw>");
+MODULE_DESCRIPTION("MX25F0A SPI controller driver");
+MODULE_LICENSE("GPL v2");
+
-- 
1.9.1

Powered by blists - more mailing lists