| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181008143946eucas1p1c0180243a556c88a3a2186ebc17737cb~bqRCEWq7m0204102041eucas1p1z@eucas1p1.samsung.com>
Date: Mon, 8 Oct 2018 16:39:44 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Alexander Shiyan <shc_work@...l.ru>
Cc: dri-devel@...ts.freedesktop.org, linux-fbdev@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH] video: fbdev: remove dead old CLPS711x LCD support driver
Since commit c86f51737f8d ("ARM: clps711x: Switch to MULTIPLATFORM")
ARCH_CLPS711X depends on ARCH_MULTIPLATFORM to be enabled so the old
CLPS711x LCD support driver (enabled by the FB_CLPS711X_OLD config
option) can't be selected any longer. Remove all FB_CLPS711XX_OLD
code as it has been dead for over 2 years now. Please note that the
new CLPS711x LCD support driver (enabled by the FB_CLPS711X config
option) is still available in the kernel tree.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
drivers/video/fbdev/Kconfig | 7
drivers/video/fbdev/Makefile | 1
drivers/video/fbdev/clps711xfb.c | 314 ---------------------------------------
3 files changed, 322 deletions(-)
Index: b/drivers/video/fbdev/Kconfig
===================================================================
--- a/drivers/video/fbdev/Kconfig 2018-10-08 12:57:36.743642088 +0200
+++ b/drivers/video/fbdev/Kconfig 2018-10-08 16:05:55.075926618 +0200
@@ -8,12 +8,6 @@ config FB_CMDLINE
config FB_NOTIFY
bool
-config FB_CLPS711X_OLD
- tristate
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
-
menuconfig FB
tristate "Support for frame buffer devices"
select FB_CMDLINE
@@ -338,7 +332,6 @@ config FB_ACORN
config FB_CLPS711X
tristate "CLPS711X LCD support"
depends on FB && (ARCH_CLPS711X || COMPILE_TEST)
- select FB_CLPS711X_OLD if ARCH_CLPS711X && !ARCH_MULTIPLATFORM
select BACKLIGHT_LCD_SUPPORT
select FB_MODE_HELPERS
select FB_SYS_FILLRECT
Index: b/drivers/video/fbdev/Makefile
===================================================================
--- a/drivers/video/fbdev/Makefile 2018-09-03 18:11:52.693791712 +0200
+++ b/drivers/video/fbdev/Makefile 2018-10-08 16:05:33.391926072 +0200
@@ -14,7 +14,6 @@ obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge
obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o
obj-$(CONFIG_FB_ARC) += arcfb.o
obj-$(CONFIG_FB_CLPS711X) += clps711x-fb.o
-obj-$(CONFIG_FB_CLPS711X_OLD) += clps711xfb.o
obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
obj-$(CONFIG_FB_GRVGA) += grvga.o
obj-$(CONFIG_FB_PM2) += pm2fb.o
Index: b/drivers/video/fbdev/clps711xfb.c
===================================================================
--- a/drivers/video/fbdev/clps711xfb.c 2018-09-03 18:11:52.705791712 +0200
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,314 +0,0 @@
-/*
- * linux/drivers/video/clps711xfb.c
- *
- * Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Framebuffer driver for the CLPS7111 and EP7212 processors.
- */
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <linux/uaccess.h>
-
-struct fb_info *cfb;
-
-#define CMAP_MAX_SIZE 16
-
-/*
- * LCD AC Prescale. This comes from the LCD panel manufacturers specifications.
- * This determines how many clocks + 1 of CL1 before the M signal toggles.
- * The number of lines on the display must not be divisible by this number.
- */
-static unsigned int lcd_ac_prescale = 13;
-
-/*
- * Set a single color register. Return != 0 for invalid regno.
- */
-static int
-clps7111fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
- u_int transp, struct fb_info *info)
-{
- unsigned int level, mask, shift, pal;
-
- if (regno >= (1 << info->var.bits_per_pixel))
- return 1;
-
- /* gray = 0.30*R + 0.58*G + 0.11*B */
- level = (red * 77 + green * 151 + blue * 28) >> 20;
-
- /*
- * On an LCD, a high value is dark, while a low value is light.
- * So we invert the level.
- *
- * This isn't true on all machines, so we only do it on EDB7211.
- * --rmk
- */
- if (machine_is_edb7211()) {
- level = 15 - level;
- }
-
- shift = 4 * (regno & 7);
- level <<= shift;
- mask = 15 << shift;
- level &= mask;
-
- regno = regno < 8 ? PALLSW : PALMSW;
-
- pal = clps_readl(regno);
- pal = (pal & ~mask) | level;
- clps_writel(pal, regno);
-
- return 0;
-}
-
-/*
- * Validate the purposed mode.
- */
-static int
-clps7111fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-{
- var->transp.msb_right = 0;
- var->transp.offset = 0;
- var->transp.length = 0;
- var->red.msb_right = 0;
- var->red.offset = 0;
- var->red.length = var->bits_per_pixel;
- var->green = var->red;
- var->blue = var->red;
-
- if (var->bits_per_pixel > 4)
- return -EINVAL;
-
- return 0;
-}
-
-/*
- * Set the hardware state.
- */
-static int
-clps7111fb_set_par(struct fb_info *info)
-{
- unsigned int lcdcon, syscon, pixclock;
-
- switch (info->var.bits_per_pixel) {
- case 1:
- info->fix.visual = FB_VISUAL_MONO01;
- break;
- case 2:
- info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
- break;
- case 4:
- info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
- break;
- }
-
- info->fix.line_length = info->var.xres_virtual * info->var.bits_per_pixel / 8;
-
- lcdcon = (info->var.xres_virtual * info->var.yres_virtual * info->var.bits_per_pixel) / 128 - 1;
- lcdcon |= ((info->var.xres_virtual / 16) - 1) << 13;
- lcdcon |= lcd_ac_prescale << 25;
-
- /*
- * Calculate pixel prescale value from the pixclock. This is:
- * 36.864MHz / pixclock_mhz - 1.
- * However, pixclock is in picoseconds, so this ends up being:
- * 36864000 * pixclock_ps / 10^12 - 1
- * and this will overflow the 32-bit math. We perform this as
- * (9 * 4096000 == 36864000):
- * pixclock_ps * 9 * (4096000 / 10^12) - 1
- */
- pixclock = 9 * info->var.pixclock / 244140 - 1;
- lcdcon |= pixclock << 19;
-
- if (info->var.bits_per_pixel == 4)
- lcdcon |= LCDCON_GSMD;
- if (info->var.bits_per_pixel >= 2)
- lcdcon |= LCDCON_GSEN;
-
- /*
- * LCDCON must only be changed while the LCD is disabled
- */
- syscon = clps_readl(SYSCON1);
- clps_writel(syscon & ~SYSCON1_LCDEN, SYSCON1);
- clps_writel(lcdcon, LCDCON);
- clps_writel(syscon | SYSCON1_LCDEN, SYSCON1);
- return 0;
-}
-
-static int clps7111fb_blank(int blank, struct fb_info *info)
-{
- /* Enable/Disable LCD controller. */
- if (blank)
- clps_writel(clps_readl(SYSCON1) & ~SYSCON1_LCDEN, SYSCON1);
- else
- clps_writel(clps_readl(SYSCON1) | SYSCON1_LCDEN, SYSCON1);
-
- return 0;
-}
-
-static struct fb_ops clps7111fb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = clps7111fb_check_var,
- .fb_set_par = clps7111fb_set_par,
- .fb_setcolreg = clps7111fb_setcolreg,
- .fb_blank = clps7111fb_blank,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-};
-
-static void clps711x_guess_lcd_params(struct fb_info *info)
-{
- unsigned int lcdcon, syscon, size;
- unsigned long phys_base = PAGE_OFFSET;
- void *virt_base = (void *)PAGE_OFFSET;
-
- info->var.xres_virtual = 640;
- info->var.yres_virtual = 240;
- info->var.bits_per_pixel = 4;
- info->var.activate = FB_ACTIVATE_NOW;
- info->var.height = -1;
- info->var.width = -1;
- info->var.pixclock = 93006; /* 10.752MHz pixel clock */
-
- /*
- * If the LCD controller is already running, decode the values
- * in LCDCON to xres/yres/bpp/pixclock/acprescale
- */
- syscon = clps_readl(SYSCON1);
- if (syscon & SYSCON1_LCDEN) {
- lcdcon = clps_readl(LCDCON);
-
- /*
- * Decode GSMD and GSEN bits to bits per pixel
- */
- switch (lcdcon & (LCDCON_GSMD | LCDCON_GSEN)) {
- case LCDCON_GSMD | LCDCON_GSEN:
- info->var.bits_per_pixel = 4;
- break;
-
- case LCDCON_GSEN:
- info->var.bits_per_pixel = 2;
- break;
-
- default:
- info->var.bits_per_pixel = 1;
- break;
- }
-
- /*
- * Decode xres/yres
- */
- info->var.xres_virtual = (((lcdcon >> 13) & 0x3f) + 1) * 16;
- info->var.yres_virtual = (((lcdcon & 0x1fff) + 1) * 128) /
- (info->var.xres_virtual *
- info->var.bits_per_pixel);
-
- /*
- * Calculate pixclock
- */
- info->var.pixclock = (((lcdcon >> 19) & 0x3f) + 1) * 244140 / 9;
-
- /*
- * Grab AC prescale
- */
- lcd_ac_prescale = (lcdcon >> 25) & 0x1f;
- }
-
- info->var.xres = info->var.xres_virtual;
- info->var.yres = info->var.yres_virtual;
- info->var.grayscale = info->var.bits_per_pixel > 1;
-
- size = info->var.xres * info->var.yres * info->var.bits_per_pixel / 8;
-
- /*
- * Might be worth checking to see if we can use the on-board
- * RAM if size here...
- * CLPS7110 - no on-board SRAM
- * EP7212 - 38400 bytes
- */
- if (size <= 38400) {
- printk(KERN_INFO "CLPS711xFB: could use on-board SRAM?\n");
- }
-
- if ((syscon & SYSCON1_LCDEN) == 0) {
- /*
- * The display isn't running. Ensure that
- * the display memory is empty.
- */
- memset(virt_base, 0, size);
- }
-
- info->screen_base = virt_base;
- info->fix.smem_start = phys_base;
- info->fix.smem_len = PAGE_ALIGN(size);
- info->fix.type = FB_TYPE_PACKED_PIXELS;
-}
-
-static int clps711x_fb_probe(struct platform_device *pdev)
-{
- int err = -ENOMEM;
-
- if (fb_get_options("clps711xfb", NULL))
- return -ENODEV;
-
- cfb = kzalloc(sizeof(*cfb), GFP_KERNEL);
- if (!cfb)
- goto out;
-
- strcpy(cfb->fix.id, "clps711x");
-
- cfb->fbops = &clps7111fb_ops;
- cfb->flags = FBINFO_DEFAULT;
-
- clps711x_guess_lcd_params(cfb);
-
- fb_alloc_cmap(&cfb->cmap, CMAP_MAX_SIZE, 0);
-
- err = register_framebuffer(cfb);
-
-out: return err;
-}
-
-static int clps711x_fb_remove(struct platform_device *pdev)
-{
- unregister_framebuffer(cfb);
- kfree(cfb);
-
- return 0;
-}
-
-static struct platform_driver clps711x_fb_driver = {
- .driver = {
- .name = "video-clps711x",
- },
- .probe = clps711x_fb_probe,
- .remove = clps711x_fb_remove,
-};
-module_platform_driver(clps711x_fb_driver);
-
-MODULE_AUTHOR("Russell King <rmk@....linux.org.uk>");
-MODULE_DESCRIPTION("CLPS711X framebuffer driver");
-MODULE_LICENSE("GPL");
Powered by blists - more mailing lists