linux-kernel - Re: [PATCH v4 2/5] dt-bindings: spi: add binding file for NXP FlexSPI controller

Open Source and information security mailing list archives

Date:   Tue, 9 Oct 2018 08:25:39 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Yogesh Gaur <yogeshnarayan.gaur@....com>
Cc:     linux-mtd@...ts.infradead.org, boris.brezillon@...tlin.com,
        marek.vasut@...il.com, linux-spi@...r.kernel.org,
        devicetree@...r.kernel.org, mark.rutland@....com, robh@...nel.org,
        linux-kernel@...r.kernel.org, frieder.schrempf@...eet.de,
        computersforpeace@...il.com, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v4 2/5] dt-bindings: spi: add binding file for NXP
 FlexSPI controller

On Mon, Oct 08, 2018 at 04:41:40PM +0530, Yogesh Gaur wrote:
> Add binding file for NXP FlexSPI controller
> 
> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@....com>
> ---
> Changes for v4:
> - Incorporated Rob review comments.
> Changes for v3:
> - Removed node property 'big-endian'.
> Changes for v2:
> - Incorporated Rob review comments.
> 
>  .../devicetree/bindings/spi/spi-nxp-fspi.txt       | 39 ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
> new file mode 100644
> index 0000000..402e2b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
> @@ -0,0 +1,39 @@
> +* NXP Flex Serial Peripheral Interface (FSPI)
> +
> +Required properties:
> +  - compatible : Should be "nxp,lx2160a-fspi"
> +  - reg :        First contains the register location and length,
> +                 Second contains the memory mapping address and length
> +  - reg-names :  Should contain the resource reg names:
> +	         - fspi_base: configuration register address space
> +                 - fspi_mmap: memory mapped address space
> +  - interrupts : Should contain the interrupt for the device
> +
> +Required SPI slave node properties:
> +  - reg :        There are two buses (A and B) with two chip selects each.
> +                 This encodes to which bus and CS the flash is connected:
> +                 - <0>: Bus A, CS 0
> +                 - <1>: Bus A, CS 1
> +                 - <2>: Bus B, CS 0
> +                 - <3>: Bus B, CS 1
> +
> +Example showing the usage of two SPI NOR slave devices on bus A:
> +
> +spi0: flexspi@...0000 {

It seems that Rob's comment on node name in v3 review gets overlooked?

Shawn

> +	compatible = "nxp,lx2160a-fspi";
> +	reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>;
> +	reg-names = "fspi_base", "fspi_mmap";
> +	interrupts = <0 25 0x4>; /* Level high type */
> +	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
> +	clock-names = "fspi_en", "fspi";
> +
> +	mt35xu512aba0: flash@0 {
> +		reg = <0>;
> +		....
> +	};
> +
> +	mt35xu512aba1: flash@1 {
> +		reg = <1>;
> +		....
> +	};
> +};
> -- 
> 2.7.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives