| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <f56c0339f146f5264e9db43efded007c3966b086.1539095312.git.ren_guo@c-sky.com>
Date: Tue, 9 Oct 2018 22:41:32 +0800
From: Guo Ren <ren_guo@...ky.com>
To: tglx@...utronix.de, jason@...edaemon.net, marc.zyngier@....com,
robh+dt@...nel.org, mark.rutland@....com,
daniel.lezcano@...aro.org, will.deacon@....com, jhogan@...nel.org,
paul.burton@...s.com, peterz@...radead.org, arnd@...db.de
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Guo Ren <ren_guo@...ky.com>
Subject: [PATCH V11 5/8] clocksource: add C-SKY SMP timer
This timer is used by SMP system and use mfcr/mtcr instruction
to access the regs.
Changelog:
- Add COMPILE_TEST
- Fixup smp boot error, cpuhp_setup_state must after timer_of_init()
- Add rollback for timer_of_cleanup.
- Use request_percpu_irq separate from time_of.
- Remove #define CPUHP_AP_CSKY_TIMER_STARTING.
- Add CPUHP_AP_CSKY_TIMER_STARTING in cpuhotplug.h.
- Support csky mp timer alpha version.
- Just use low-counter with 32bit width as clocksource.
- Coding convention with upstream feed-back.
Signed-off-by: Guo Ren <ren_guo@...ky.com>
Cc: Daniel Lezcano <daniel.lezcano@...aro.org>
---
drivers/clocksource/Kconfig | 10 +++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-mp-csky.c | 173 ++++++++++++++++++++++++++++++++++++
include/linux/cpuhotplug.h | 1 +
4 files changed, 185 insertions(+)
create mode 100644 drivers/clocksource/timer-mp-csky.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index a11f4ba..591c9a8 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -620,4 +620,14 @@ config RISCV_TIMER
is accessed via both the SBI and the rdcycle instruction. This is
required for all RISC-V systems.
+config CSKY_MP_TIMER
+ bool "SMP Timer for the C-SKY platform" if COMPILE_TEST
+ depends on CSKY
+ select TIMER_OF
+ help
+ Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP
+ system.
+ csky,mptimer is not only used in SMP system, it also could be used
+ single core system. It's not a mmio reg and it use mtcr/mfcr instruction.
+
endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index db51b24..5ce82d3 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -79,3 +79,4 @@ obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
obj-$(CONFIG_X86_NUMACHIP) += numachip.o
obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o
obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o
+obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o
diff --git a/drivers/clocksource/timer-mp-csky.c b/drivers/clocksource/timer-mp-csky.c
new file mode 100644
index 0000000..a8acc43
--- /dev/null
+++ b/drivers/clocksource/timer-mp-csky.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+#include <linux/cpu.h>
+#include <linux/of_irq.h>
+#include <asm/reg_ops.h>
+
+#include "timer-of.h"
+
+#define PTIM_CCVR "cr<3, 14>"
+#define PTIM_CTLR "cr<0, 14>"
+#define PTIM_LVR "cr<6, 14>"
+#define PTIM_TSR "cr<1, 14>"
+
+static int csky_mptimer_irq;
+
+static int csky_mptimer_set_next_event(unsigned long delta,
+ struct clock_event_device *ce)
+{
+ mtcr(PTIM_LVR, delta);
+
+ return 0;
+}
+
+static int csky_mptimer_shutdown(struct clock_event_device *ce)
+{
+ mtcr(PTIM_CTLR, 0);
+
+ return 0;
+}
+
+static int csky_mptimer_oneshot(struct clock_event_device *ce)
+{
+ mtcr(PTIM_CTLR, 1);
+
+ return 0;
+}
+
+static int csky_mptimer_oneshot_stopped(struct clock_event_device *ce)
+{
+ mtcr(PTIM_CTLR, 0);
+
+ return 0;
+}
+
+static DEFINE_PER_CPU(struct timer_of, csky_to) = {
+ .flags = TIMER_OF_CLOCK,
+ .clkevt = {
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_PERCPU |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = csky_mptimer_shutdown,
+ .set_state_oneshot = csky_mptimer_oneshot,
+ .set_state_oneshot_stopped = csky_mptimer_oneshot_stopped,
+ .set_next_event = csky_mptimer_set_next_event,
+ },
+};
+
+static irqreturn_t csky_timer_interrupt(int irq, void *dev)
+{
+ struct timer_of *to = this_cpu_ptr(&csky_to);
+
+ mtcr(PTIM_TSR, 0);
+
+ to->clkevt.event_handler(&to->clkevt);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * clock event for percpu
+ */
+static int csky_mptimer_starting_cpu(unsigned int cpu)
+{
+ struct timer_of *to = per_cpu_ptr(&csky_to, cpu);
+
+ to->clkevt.cpumask = cpumask_of(cpu);
+
+ clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
+ 2, ULONG_MAX);
+
+ enable_percpu_irq(csky_mptimer_irq, 0);
+
+ return 0;
+}
+
+static int csky_mptimer_dying_cpu(unsigned int cpu)
+{
+ disable_percpu_irq(csky_mptimer_irq);
+
+ return 0;
+}
+
+/*
+ * clock source
+ */
+static u64 sched_clock_read(void)
+{
+ return (u64)mfcr(PTIM_CCVR);
+}
+
+static u64 clksrc_read(struct clocksource *c)
+{
+ return (u64)mfcr(PTIM_CCVR);
+}
+
+struct clocksource csky_clocksource = {
+ .name = "csky",
+ .rating = 400,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .read = clksrc_read,
+};
+
+static int __init csky_mptimer_init(struct device_node *np)
+{
+ int ret, cpu, cpu_rollback;
+ struct timer_of *to = NULL;
+
+ /*
+ * Csky_mptimer is designed for C-SKY SMP multi-processors and
+ * every core has it's own private irq and regs for clkevt and
+ * clksrc.
+ *
+ * The regs is accessed by cpu instruction: mfcr/mtcr instead of
+ * mmio map style. So we needn't mmio-address in dts, but we still
+ * need to give clk and irq number.
+ *
+ * We use private irq for the mptimer and irq number is the same
+ * for every core. So we use request_percpu_irq() in timer_of_init.
+ */
+ csky_mptimer_irq = irq_of_parse_and_map(np, 0);
+ if (csky_mptimer_irq <= 0)
+ return -EINVAL;
+
+ ret = request_percpu_irq(csky_mptimer_irq, csky_timer_interrupt,
+ "csky_mp_timer", &csky_to);
+ if (ret)
+ return -EINVAL;
+
+ for_each_possible_cpu(cpu) {
+ to = per_cpu_ptr(&csky_to, cpu);
+ ret = timer_of_init(np, to);
+ if (ret)
+ goto rollback;
+ }
+
+ clocksource_register_hz(&csky_clocksource, timer_of_rate(to));
+ sched_clock_register(sched_clock_read, 32, timer_of_rate(to));
+
+ ret = cpuhp_setup_state(CPUHP_AP_CSKY_TIMER_STARTING,
+ "clockevents/csky/timer:starting",
+ csky_mptimer_starting_cpu,
+ csky_mptimer_dying_cpu);
+ if (ret)
+ return -EINVAL;
+
+ return 0;
+
+rollback:
+ for_each_possible_cpu(cpu_rollback) {
+ if (cpu_rollback == cpu)
+ break;
+
+ to = per_cpu_ptr(&csky_to, cpu_rollback);
+ timer_of_cleanup(to);
+ }
+ return -EINVAL;
+}
+TIMER_OF_DECLARE(csky_mptimer, "csky,mptimer", csky_mptimer_init);
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index caf40ad..e0cd2ba 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -126,6 +126,7 @@ enum cpuhp_state {
CPUHP_AP_MIPS_GIC_TIMER_STARTING,
CPUHP_AP_ARC_TIMER_STARTING,
CPUHP_AP_RISCV_TIMER_STARTING,
+ CPUHP_AP_CSKY_TIMER_STARTING,
CPUHP_AP_KVM_STARTING,
CPUHP_AP_KVM_ARM_VGIC_INIT_STARTING,
CPUHP_AP_KVM_ARM_VGIC_STARTING,
--
2.7.4
Powered by blists - more mailing lists