[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Wed, 10 Oct 2018 09:25:24 +0200
From: Michal Simek <michal.simek@...inx.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
<robh+dt@...nel.org>, <heiko@...ech.de>, <ezequiel@...labora.com>,
<xuwei5@...ilicon.com>, <michal.simek@...inx.com>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<linux-rockchip@...ts.infradead.org>, <daniel.thompson@...aro.org>,
<amit.kucheria@...aro.org>, <linus.walleij@...aro.org>,
<koen.kooi@...aro.org>
Subject: Re: [PATCH 6/6] arm64: dts: xilinx: ultra96: Standardize LED labels
and triggers
On 9.10.2018 16:05, Manivannan Sadhasivam wrote:
> For all 96Boards, the following standard is used for onboard LEDs.
>
> device-name:green:user1 default-trigger: heartbeat
> device-name:green:user2 default-trigger: mmc0/disk-activity
> (onboard-storage)
> device-name:green:user3 default-trigger: mmc1 (SD-card)
> device-name:green:user4 default-trigger: none, panic-indicator
> device-name:yellow:wlan default-trigger: phy0tx
> device-name:blue:bt default-trigger: hci0-power
>
> So lets adopt the same for Ultra96, which is one of the 96Boards
> CE and AI platform. Since the WLAN and BT LEDs are hardwired onboard,
> consolidate only User LEDs.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> ---
> arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> index eb5e8bddb610..565ceb390f99 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> @@ -57,29 +57,30 @@
> leds {
> compatible = "gpio-leds";
> ds2 {
> - label = "ds2";
> + label = "zynqmp-zcu100-revC:green:user1";
The purpose of this series should be standardize Led labels that's why I
would expect that leds will be called in the same way on all these
boards that's why I am not getting why there is board name.
green:user1 or just user1 should be enough.
Thanks,
Michal
Powered by blists - more mailing lists