[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Wed, 10 Oct 2018 10:41:38 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: Vladimir Zapolskiy <vz@...ia.com>
Cc: Lee Jones <lee.jones@...aro.org>, Rob Herring <robh+dt@...nel.org>,
Mark Vasut <marek.vasut@...il.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Wolfram Sang <wsa@...-dreams.de>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
linux-media@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Sandeep_Jain@...tor.com,
Vladimir Zapolskiy <vladimir_zapolskiy@...tor.com>,
"open list:DRM PANEL DRIVERS" <dri-devel@...ts.freedesktop.org>
Subject: Re: [PATCH 1/7] dt-bindings: mfd: ds90ux9xx: add description of TI
DS90Ux9xx ICs
On Mon, Oct 8, 2018 at 11:12 PM Vladimir Zapolskiy <vz@...ia.com> wrote:
> From: Sandeep Jain <Sandeep_Jain@...tor.com>
(...)
> +- ti,pixel-clock-edge : Selects Pixel Clock Edge.
> + Possible values are "<1>" or "<0>".
> + If "ti,pixel-clock-edge" is High <1>, output data is strobed on the
> + Rising edge of the PCLK. If ti,pixel-clock-edge is Low <0>, data is
> + strobed on the Falling edge of the PCLK.
> + If "ti,pixel-clock-edge" is not mentioned, the pixel clock edge
> + value is not touched and given by hardware pin strapping.
Please use the existing binding in
Documentation/devicetree/bindings/display/panel/display-timing.txt
for this: pixelclk-active = [<0>|<1>];
Please reference the above document in your binding.
Yours,
Linus Walleij
Powered by blists - more mailing lists