linux-kernel - [PATCH 09/11] dt-bindings: spi/spi-pxa2xx: Add ready GPIO signal

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 10 Oct 2018 19:09:34 +0200
From:   Lubomir Rintel <lkundrak@...sk>
To:     Mark Brown <broonie@...nel.org>,
        Geert Uytterhoeven <geert+renesas@...der.be>
Cc:     James Cameron <quozl@...top.org>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Eric Miao <eric.y.miao@...il.com>,
        Haojian Zhuang <haojian.zhuang@...il.com>,
        Daniel Mack <daniel@...que.org>,
        Robert Jarzmik <robert.jarzmik@...e.fr>,
        linux-spi@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        Lubomir Rintel <lkundrak@...sk>
Subject: [PATCH 09/11] dt-bindings: spi/spi-pxa2xx: Add ready GPIO signal

This this is used to let the SPI master know that our FIFO is filled and
we're ready to service a transfer. Only useful in slave mode.

A signal like this is used by an embedded controller on a OLPC XO 1.75
machine, that happens to be a SPI master.

Signed-off-by: Lubomir Rintel <lkundrak@...sk>
---
 Documentation/devicetree/bindings/spi/spi-pxa2xx.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
index 89b2832283e3..681a82b40e6f 100644
--- a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
@@ -12,6 +12,8 @@ Optional properties:
 - cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
   Documentation/devicetree/bindings/spi/spi-bus.txt
 - spi-slave: Empty property indicating the SPI controller is used in slave mode.
+- ready-gpio: GPIO used to signal a SPI master that the FIFO is filled
+  and we're ready to service a transfer. Only useful in slave mode.
 
 Child nodes represent devices on the SPI bus
   See ../spi/spi-bus.txt
-- 
2.19.0