| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <VI1PR0401MB222469D81006CCD5CA3369C3F3E10@VI1PR0401MB2224.eurprd04.prod.outlook.com>
Date: Thu, 11 Oct 2018 08:07:15 +0000
From: Andy Tang <andy.tang@....com>
To: "rui.zhang@...el.com" <rui.zhang@...el.com>
CC: "edubezval@...il.com" <edubezval@...il.com>,
"daniel.lezcano@...aro.org" <daniel.lezcano@...aro.org>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH] thermal: qoriq: add multiple sensors support
Hi Rui,
Appreciate if you can give it a review.
BR,
Andy
> -----Original Message-----
> From: andy.tang@....com <andy.tang@....com>
> Sent: 2018年9月27日 10:42
> To: rui.zhang@...el.com
> Cc: edubezval@...il.com; daniel.lezcano@...aro.org;
> linux-pm@...r.kernel.org; linux-kernel@...r.kernel.org; Andy Tang
> <andy.tang@....com>
> Subject: [PATCH] thermal: qoriq: add multiple sensors support
>
> From: Yuantian Tang <andy.tang@....com>
>
> There is only one sensor supported in current driver.
> Multiple sensors are existing on Layscape socs. To support them, covert
> this driver to support multiple sensors.
>
> Signed-off-by: Tang Yuantian <andy.tang@....com>
> ---
> drivers/thermal/qoriq_thermal.c | 117
> +++++++++++++++++++++++----------------
> 1 files changed, 70 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/thermal/qoriq_thermal.c
> b/drivers/thermal/qoriq_thermal.c index c866cc1..7c1e88a 100644
> --- a/drivers/thermal/qoriq_thermal.c
> +++ b/drivers/thermal/qoriq_thermal.c
> @@ -69,14 +69,21 @@ struct qoriq_tmu_regs {
> u32 ttr3cr; /* Temperature Range 3 Control Register */
> };
>
> +struct qoriq_tmu_data;
> +
> /*
> * Thermal zone data
> */
> +struct qoriq_sensor {
> + struct thermal_zone_device *tzd;
> + struct qoriq_tmu_data *qdata;
> + int id;
> +};
> +
> struct qoriq_tmu_data {
> - struct thermal_zone_device *tz;
> struct qoriq_tmu_regs __iomem *regs;
> - int sensor_id;
> bool little_endian;
> + struct qoriq_sensor *sensor[SITES_MAX];
> };
>
> static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem
> *addr) @@ -97,48 +104,83 @@ static u32 tmu_read(struct
> qoriq_tmu_data *p, void __iomem *addr)
>
> static int tmu_get_temp(void *p, int *temp) {
> + struct qoriq_sensor *qsensor = p;
> + struct qoriq_tmu_data *qdata = qsensor->qdata;
> u32 val;
> - struct qoriq_tmu_data *data = p;
>
> - val = tmu_read(data, &data->regs->site[data->sensor_id].tritsr);
> + val = tmu_read(qdata, &qdata->regs->site[qsensor->id].tritsr);
> *temp = (val & 0xff) * 1000;
>
> return 0;
> }
>
> -static int qoriq_tmu_get_sensor_id(void)
> +static const struct thermal_zone_of_device_ops tmu_tz_ops = {
> + .get_temp = tmu_get_temp,
> +};
> +
> +static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
> {
> - int ret, id;
> + struct qoriq_tmu_data *qdata = platform_get_drvdata(pdev);
> struct of_phandle_args sensor_specs;
> struct device_node *np, *sensor_np;
> + int ret, id, sites = 0;
>
> np = of_find_node_by_name(NULL, "thermal-zones");
> if (!np)
> return -ENODEV;
>
> - sensor_np = of_get_next_child(np, NULL);
> - ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors",
> - "#thermal-sensor-cells",
> - 0, &sensor_specs);
> - if (ret) {
> + for_each_available_child_of_node(np, sensor_np) {
> + ret = of_parse_phandle_with_args(sensor_np,
> "thermal-sensors",
> + "#thermal-sensor-cells",
> + 0, &sensor_specs);
> + if (ret) {
> + of_node_put(np);
> + of_node_put(sensor_np);
> + return ret;
> + }
> +
> + if (sensor_specs.args_count >= 1) {
> + id = sensor_specs.args[0];
> + WARN(sensor_specs.args_count > 1,
> + "%s: too many cells in sensor specifier %d\n",
> + sensor_specs.np->name,
> + sensor_specs.args_count);
> + } else {
> + id = 0;
> + }
> +
> of_node_put(np);
> of_node_put(sensor_np);
> - return ret;
> - }
>
> - if (sensor_specs.args_count >= 1) {
> - id = sensor_specs.args[0];
> - WARN(sensor_specs.args_count > 1,
> - "%s: too many cells in sensor specifier %d\n",
> - sensor_specs.np->name, sensor_specs.args_count);
> - } else {
> - id = 0;
> + if (id > SITES_MAX)
> + return -EINVAL;
> +
> + qdata->sensor[id] = devm_kzalloc(&pdev->dev,
> + sizeof(struct qoriq_sensor), GFP_KERNEL);
> + if (!qdata->sensor[id])
> + return -ENOMEM;
> +
> + qdata->sensor[id]->id = id;
> + qdata->sensor[id]->qdata = qdata;
> +
> + qdata->sensor[id]->tzd =
> devm_thermal_zone_of_sensor_register(
> + &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops);
> +
> + if (IS_ERR(qdata->sensor[id]->tzd)) {
> + ret = PTR_ERR(qdata->sensor[id]->tzd);
> + dev_err(&pdev->dev,
> + "Failed to register thermal zone device.\n");
> + return -ENODEV;
> + }
> +
> + sites |= 0x1 << (15 - id);
> }
>
> - of_node_put(np);
> - of_node_put(sensor_np);
> + /* Enable monitoring */
> + if (sites != 0)
> + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
> &qdata->regs->tmr);
>
> - return id;
> + return 0;
> }
>
> static int qoriq_tmu_calibration(struct platform_device *pdev) @@
> -188,16 +230,11 @@ static void qoriq_tmu_init_device(struct
> qoriq_tmu_data *data)
> tmu_write(data, TMR_DISABLE, &data->regs->tmr); }
>
> -static const struct thermal_zone_of_device_ops tmu_tz_ops = {
> - .get_temp = tmu_get_temp,
> -};
> -
> static int qoriq_tmu_probe(struct platform_device *pdev) {
> int ret;
> struct qoriq_tmu_data *data;
> struct device_node *np = pdev->dev.of_node;
> - u32 site = 0;
>
> if (!np) {
> dev_err(&pdev->dev, "Device OF-Node is NULL"); @@ -213,13
> +250,6 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
>
> data->little_endian = of_property_read_bool(np, "little-endian");
>
> - data->sensor_id = qoriq_tmu_get_sensor_id();
> - if (data->sensor_id < 0) {
> - dev_err(&pdev->dev, "Failed to get sensor id\n");
> - ret = -ENODEV;
> - goto err_iomap;
> - }
> -
> data->regs = of_iomap(np, 0);
> if (!data->regs) {
> dev_err(&pdev->dev, "Failed to get memory region\n"); @@
> -233,18 +263,13 @@ static int qoriq_tmu_probe(struct platform_device
> *pdev)
> if (ret < 0)
> goto err_tmu;
>
> - data->tz = thermal_zone_of_sensor_register(&pdev->dev,
> data->sensor_id,
> - data, &tmu_tz_ops);
> - if (IS_ERR(data->tz)) {
> - ret = PTR_ERR(data->tz);
> - dev_err(&pdev->dev,
> - "Failed to register thermal zone device %d\n", ret);
> - goto err_tmu;
> + ret = qoriq_tmu_register_tmu_zone(pdev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to register sensors\n");
> + ret = -ENODEV;
> + goto err_iomap;
> }
>
> - /* Enable monitoring */
> - site |= 0x1 << (15 - data->sensor_id);
> - tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr);
>
> return 0;
>
> @@ -261,8 +286,6 @@ static int qoriq_tmu_remove(struct
> platform_device *pdev) {
> struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
>
> - thermal_zone_of_sensor_unregister(&pdev->dev, data->tz);
> -
> /* Disable monitoring */
> tmu_write(data, TMR_DISABLE, &data->regs->tmr);
>
> --
> 1.7.1
Powered by blists - more mailing lists