linux-kernel - Re: R8169: Network lockups in 4.18.{8,9,10} (and 4.19 dev)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <df88dcb6-951d-0568-6104-7346d0c49063@maciej.szmigiero.name>
Date:   Thu, 11 Oct 2018 02:12:33 +0200
From:   "Maciej S. Szmigiero" <mail@...iej.szmigiero.name>
To:     Chris Clayton <chris2553@...glemail.com>
Cc:     Heiner Kallweit <hkallweit1@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Azat Khuzhin <a3at.mail@...il.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Realtek linux nic maintainers <nic_swsd@...ltek.com>,
        linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: R8169: Network lockups in 4.18.{8,9,10} (and 4.19 dev)

On 11.10.2018 00:49, Chris Clayton wrote:
>> Now, knowing the "right" value you can experiment with what rtl_init_rxcfg()
>> writes (under the "default:" label for your NIC model).
>>
> 
> This might be more interesting. Through a combination of viewing the output from pr_notice() and the output from
> "ethtool -d", I can see RxConfig with the following values
> 
> 	During boot:	0x00028700
> 	Before suspend:	0x0002870e
> 	During resume:	0x00024000
> 	Post resume:	0x0002870e
> 
> As I did with 4.18.10 early on in the process, I removed the call to rtl_init_rxcfg() from rtl_hw_start() and rebuilt,
> installed and rebooted. Now I see the following values:
> 
> 	During boot:	0x00028700
> 	Before suspend:	0x0002870e
> 	During resume:	0x00024000
> 	Post resume:	0x0002400e
> 

Now we can finally see some difference...
Besides missing RX128_INT_EN (bit 15 or 0x8000) and RX_DMA_BURST
(bits 8-10 or 0x700) - that rtl_init_rxcfg() would normally set so this
is kind of expected - one can see that the working configuration
post-resume has bit 14 (or 0x4000) set, too.

This bit is described in the driver as RX_MULTI_EN ("8111c only") and is
set by rtl_init_rxcfg() for example for RTL_GIGA_MAC_VER_35.

RTL_GIGA_MAC_VER_35 is described in the driver as being in the same
family as your RTL_GIGA_MAC_VER_38, so can you please try the following
change:
--- r8169.c
+++ r8169.c
@@ -4271,6 +4271,7 @@ static void rtl_init_rxcfg(struct rtl816
 	case RTL_GIGA_MAC_VER_18 ... RTL_GIGA_MAC_VER_24:
 	case RTL_GIGA_MAC_VER_34:
 	case RTL_GIGA_MAC_VER_35:
+	case RTL_GIGA_MAC_VER_38:
 		RTL_W32(tp, RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
 		break;
 	case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51:

This will add RX_MULTI_EN also for your chip model (you need to add back
the call to rtl_init_rxcfg() to rtl_hw_start(), naturally).

If this does not help then I would try another values in the above write:
1) RTL_W32(tp, RxConfig, 0x00024000);
2) RTL_W32(tp, RxConfig, 0x00004000);
3) RTL_W32(tp, RxConfig, RX_DMA_BURST);
4) RTL_W32(tp, RxConfig, RX128_INT_EN);

> Chris

Maciej