linux-kernel - [PATCH v3] PCI/AER: Enable reporting for ports enumerated after AER driver registration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <153927157816.40414.5263399018962087014.stgit@bhelgaas-glaptop.roam.corp.google.com>
Date:   Thu, 11 Oct 2018 10:26:18 -0500
From:   Bjorn Helgaas <helgaas@...nel.org>
To:     Jon Derrick <jonathan.derrick@...el.com>
Cc:     Dongdong Liu <liudongdong3@...wei.com>,
        Keith Busch <keith.busch@...el.com>,
        Sinan Kaya <okaya@...nel.org>,
        Oza Pawandeep <poza@...eaurora.org>,
        Matthew Wilcox <willy@...radead.org>,
        Lukas Wunner <lukas@...ner.de>, Christoph Hellwig <hch@....de>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3] PCI/AER: Enable reporting for ports enumerated after AER
 driver registration

From: Bjorn Helgaas <bhelgaas@...gle.com>

Previously we enabled AER error reporting only for Switch Ports that were
enumerated prior to registering the AER service driver.  Switch Ports
enumerated after AER driver registration were left with error reporting
disabled.

A common order, which works correctly, is that we enumerate devices before
registering portdrv and the AER driver:

  - Enumerate all the devices at boot-time

  - Register portdrv and bind it to all Root Ports and Switch Ports, which
    disables error reporting for these Ports

  - Register AER service driver and bind it to all Root Ports, which
    enables error reporting for the Root Ports and any Switch Ports below
    them

But if we enumerate devices *after* registering portdrv and the AER driver,
e.g., if a host bridge driver is loaded as a module, error reporting is not
enabled correctly:

  - Register portdrv and AER driver (this happens at boot-time)

  - Enumerate a Root Port

  - Bind portdrv to Root Port, disabling its error reporting

  - Bind AER service driver to Root Port, enabling error reporting for it
    and its children (there are no children, since we haven't enumerated
    them yet)

  - Enumerate Switch Port below the Root Port

  - Bind portdrv to Switch Port, disabling its error reporting

  - AER service driver doesn't bind to Switch Ports, so error reporting
    remains disabled

Hot-adding a Switch fails similarly: error reporting is enabled correctly
for the Root Port, but when the Switch is enumerated, the AER service
driver doesn't claim it, so there's nothing to enable error reporting for
the Switch Ports.

Change the AER service driver so it binds to *all* PCIe Ports, including
Switch Upstream and Downstream Ports.  Enable AER error reporting for all
these Ports, but not for any children.

Link: https://lore.kernel.org/linux-pci/1536085989-2956-1-git-send-email-jonathan.derrick@intel.com
Based-on-patch-by: Jon Derrick <jonathan.derrick@...el.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
---
 drivers/pci/pcie/aer.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 90b53abf621d..c40c6607849b 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1316,12 +1316,6 @@ static void aer_enable_rootport(struct aer_rpc *rpc)
 	pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, &reg32);
 	pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32);
 
-	/*
-	 * Enable error reporting for the root port device and downstream port
-	 * devices.
-	 */
-	set_downstream_devices_error_reporting(pdev, true);
-
 	/* Enable Root Port's interrupt in response to error messages */
 	pci_read_config_dword(pdev, aer_pos + PCI_ERR_ROOT_COMMAND, &reg32);
 	reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
@@ -1378,10 +1372,17 @@ static void aer_remove(struct pcie_device *dev)
  */
 static int aer_probe(struct pcie_device *dev)
 {
+	struct pci_dev *pdev = dev->port;
+	int type = pci_pcie_type(pdev);
 	int status;
 	struct aer_rpc *rpc;
 	struct device *device = &dev->device;
 
+	if (type == PCI_EXP_TYPE_UPSTREAM || type == PCI_EXP_TYPE_DOWNSTREAM) {
+		pci_enable_pcie_error_reporting(pdev);
+		return 0;
+	}
+
 	rpc = devm_kzalloc(device, sizeof(struct aer_rpc), GFP_KERNEL);
 	if (!rpc) {
 		dev_printk(KERN_DEBUG, device, "alloc AER rpc failed\n");
@@ -1399,6 +1400,7 @@ static int aer_probe(struct pcie_device *dev)
 	}
 
 	aer_enable_rootport(rpc);
+	pci_enable_pcie_error_reporting(pdev);
 	dev_info(device, "AER enabled with IRQ %d\n", dev->irq);
 	return 0;
 }
@@ -1439,7 +1441,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 
 static struct pcie_port_service_driver aerdriver = {
 	.name		= "aer",
-	.port_type	= PCI_EXP_TYPE_ROOT_PORT,
+	.port_type	= PCIE_ANY_PORT,
 	.service	= PCIE_PORT_SERVICE_AER,
 
 	.probe		= aer_probe,