| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <edfa97ecec29c63203f75634c2842c16513ff96c.1539315391.git.ren_guo@c-sky.com>
Date: Fri, 12 Oct 2018 12:42:56 +0800
From: Guo Ren <ren_guo@...ky.com>
To: akpm@...ux-foundation.org, arnd@...db.de,
daniel.lezcano@...aro.org, davem@...emloft.net,
gregkh@...uxfoundation.org, hch@...radead.org,
marc.zyngier@....com, mark.rutland@....com, peterz@...radead.org,
robh@...nel.org, tglx@...utronix.de
Cc: linux-kernel@...r.kernel.org, linux-arch@...r.kernel.org,
devicetree@...r.kernel.org, robh+dt@...nel.org,
c-sky_gcc_upstream@...ky.com, Guo Ren <ren_guo@...ky.com>
Subject: [PATCH V8 21/21] csky: add support get_user_size access dword
Support dword access for get_user_size and redesign put_user_size with
the same style of get_user_size. It's Ok to use xxx_user_asm_common for
all size of variable with ldb, ldh, ldw, ld.d
ld.d rx, (addr, 0) could "rx <= addr" "and r(x+1) <= addr+4" and this also
follow abiv2 gcc ABI for dword access.
abiv1 couldn't support __get_user_dword now.
Signed-off-by: Guo Ren <ren_guo@...ky.com>
---
arch/csky/include/asm/uaccess.h | 140 ++++++++++++++++------------------------
1 file changed, 56 insertions(+), 84 deletions(-)
diff --git a/arch/csky/include/asm/uaccess.h b/arch/csky/include/asm/uaccess.h
index acaf0e210..80233e4 100644
--- a/arch/csky/include/asm/uaccess.h
+++ b/arch/csky/include/asm/uaccess.h
@@ -96,90 +96,32 @@ extern int __put_user_bad(void);
__pu_err; \
})
-#define __put_user_size(x, ptr, size, retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: \
- __put_user_asm_b(x, ptr, retval); \
- break; \
- case 2: \
- __put_user_asm_h(x, ptr, retval); \
- break; \
- case 4: \
- __put_user_asm_w(x, ptr, retval); \
- break; \
- case 8: \
- __put_user_asm_64(x, ptr, retval); \
- break; \
- default: \
- __put_user_bad(); \
- } \
-} while (0)
-
-/*
- * We don't tell gcc that we are accessing memory, but this is OK
- * because we do not write to any memory gcc knows about, so there
- * are no aliasing issues.
- *
- * Note that PC at a fault is the address *after* the faulting
- * instruction.
- */
-#define __put_user_asm_b(x, ptr, err) \
-do { \
- int errcode; \
- asm volatile( \
- "1: stb %1, (%2,0) \n" \
- " br 3f \n" \
- "2: mov %0, %3 \n" \
- " br 3f \n" \
- ".section __ex_table, \"a\" \n" \
- ".align 2 \n" \
- ".long 1b,2b \n" \
- ".previous \n" \
- "3: \n" \
- : "=r"(err), "=r"(x), "=r"(ptr), "=r"(errcode) \
- : "0"(err), "1"(x), "2"(ptr), "3"(-EFAULT) \
- : "memory"); \
-} while (0)
-
-#define __put_user_asm_h(x, ptr, err) \
-do { \
- int errcode; \
- asm volatile( \
- "1: sth %1, (%2,0) \n" \
- " br 3f \n" \
- "2: mov %0, %3 \n" \
- " br 3f \n" \
- ".section __ex_table, \"a\" \n" \
- ".align 2 \n" \
- ".long 1b,2b \n" \
- ".previous \n" \
- "3: \n" \
- : "=r"(err), "=r"(x), "=r"(ptr), "=r"(errcode) \
- : "0"(err), "1"(x), "2"(ptr), "3"(-EFAULT) \
- : "memory"); \
-} while (0)
-
-#define __put_user_asm_w(x, ptr, err) \
-do { \
- int errcode; \
- asm volatile( \
- "1: stw %1, (%2,0) \n" \
- " br 3f \n" \
- "2: mov %0, %3 \n" \
- " br 3f \n" \
- ".section __ex_table,\"a\" \n" \
- ".align 2 \n" \
- ".long 1b, 2b \n" \
- ".previous \n" \
- "3: \n" \
- : "=r"(err), "=r"(x), "=r"(ptr), "=r"(errcode) \
- : "0"(err), "1"(x), "2"(ptr), "3"(-EFAULT) \
- : "memory"); \
+#define __put_user_size(x, ptr, size, retval) \
+do { \
+ retval = 0; \
+ switch (size) { \
+ case 1: \
+ __put_user_asm_common(x, ptr, "stb", retval); \
+ break; \
+ case 2: \
+ __put_user_asm_common(x, ptr, "sth", retval); \
+ break; \
+ case 4: \
+ __put_user_asm_common(x, ptr, "stw", retval); \
+ break; \
+ case 8: \
+ __put_user_asm_dword(x, ptr, retval); \
+ break; \
+ default: \
+ __put_user_bad(); \
+ } \
} while (0)
-#define __put_user_asm_64(x, ptr, err) \
+#if defined(__CSKYABIV2__)
+#define __put_user_asm_dword(x, ptr, err) \
+ __put_user_asm_common(x, ptr, "st.d", err)
+#else
+#define __put_user_asm_dword(x, ptr, err) \
do { \
int tmp; \
int errcode; \
@@ -205,6 +147,25 @@ do { \
: "0"(err), "1"(psrc), "2"(ptr), "3"(0), "4"(-EFAULT) \
: "memory"); \
} while (0)
+#endif
+
+#define __put_user_asm_common(x, ptr, ins, err) \
+do { \
+ int errcode; \
+ asm volatile( \
+ "1: " ins " %1, (%2,0) \n" \
+ " br 3f \n" \
+ "2: mov %0, %3 \n" \
+ " br 3f \n" \
+ ".section __ex_table, \"a\" \n" \
+ ".align 2 \n" \
+ ".long 1b,2b \n" \
+ ".previous \n" \
+ "3: \n" \
+ : "=r"(err), "=r"(x), "=r"(ptr), "=r"(errcode) \
+ : "0"(err), "1"(x), "2"(ptr), "3"(-EFAULT) \
+ : "memory"); \
+} while (0)
#define __get_user_nocheck(x, ptr, size) \
({ \
@@ -222,6 +183,7 @@ do { \
__gu_err; \
})
+extern int __get_user_bad(void);
#define __get_user_size(x, ptr, size, retval) \
do { \
switch (size) { \
@@ -234,12 +196,24 @@ do { \
case 4: \
__get_user_asm_common((x), ptr, "ldw", retval); \
break; \
+ case 8: \
+ __get_user_asm_common((x), ptr, "ld.d", retval);\
+ break; \
default: \
x = 0; \
(retval) = __get_user_bad(); \
} \
} while (0)
+#if defined(__CSKYABIV2__)
+#define __get_user_asm_dword(x, ptr, err) \
+ __get_user_asm_common(x, ptr, "ld.d", err)
+#else
+/* fixme: abiv1 not implement get_user_dword */
+#define __get_user_asm_dword(x, ptr, err) \
+ __get_user_bad()
+#endif
+
#define __get_user_asm_common(x, ptr, ins, err) \
do { \
int errcode; \
@@ -260,8 +234,6 @@ do { \
: "memory"); \
} while (0)
-extern int __get_user_bad(void);
-
#define __copy_user(to, from, n) \
do { \
int w0, w1, w2, w3; \
--
2.7.4
Powered by blists - more mailing lists