OPAL: Switch to little-endian OS kexec: Starting switchover sequence. hash-mmu: Page sizes from device-tree: hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0 hash-mmu: base_shift=12: shift=16, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=7 hash-mmu: base_shift=12: shift=24, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=56 hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=1 hash-mmu: base_shift=16: shift=24, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=8 hash-mmu: base_shift=20: shift=20, sllp=0x0130, avpnm=0x00000000, tlbiel=0, penc=2 hash-mmu: base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0 hash-mmu: base_shift=34: shift=34, sllp=0x0120, avpnm=0x000007ff, tlbiel=0, penc=3 Using 1TB segments hash-mmu: Initializing hash mmu with SLB Linux version 4.19.0-rc7-next-20181011-autotest-dirty (root@ltc-garri5.pok.stglabs.ibm.com) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-28) (GCC)) #2 SMP Fri Oct 12 08:47:18 EDT 2018 Found initrd at 0xc000000002580000:0xc000000003b296dd OPAL: Found non-mapped LPC bus on chip 0 Using PowerNV machine description bootconsole [udbg0] enabled CPU maps initialized for 8 threads per core ----------------------------------------------------- ppc64_pft_size = 0x0 phys_mem_size = 0x4000000000 dcache_bsize = 0x80 icache_bsize = 0x80 cpu_features = 0x000000ff8f5db1a7 possible = 0x0000fbffcf5fb1a7 always = 0x00000003800081a1 cpu_user_features = 0xdc0065c2 0xef000000 mmu_features = 0x7c006001 firmware_features = 0x0000000110000000 htab_address = 0x(____ptrval____) htab_hash_mask = 0x1fffff ----------------------------------------------------- cma: Reserved 13120 MiB at 0x0000003cac000000 numa: NODE_DATA [mem 0x1fff972300-0x1fff97bfff] numa: NODE_DATA [mem 0x3fff0c2300-0x3fff0cbfff] rfi-flush: ori type flush available count-cache-flush: software flush disabled. stf-barrier: hwsync barrier available Initializing IODA2 PHB (/pciex@3fffe40000000) PCI host bridge /pciex@3fffe40000000 (primary) ranges: MEM 0x00003fe000000000..0x00003fe07ffeffff -> 0x0000000080000000 MEM 0x0000200000000000..0x000020ffffffffff -> 0x0000200000000000 (M64 #0..15) Using M64 #15 as default window 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x10000000000 [segment=0x100000000] Allocated bitmap for 2040 MSIs (base IRQ 0x800) Initializing IODA2 PHB (/pciex@3fffe40100000) PCI host bridge /pciex@3fffe40100000 ranges: MEM 0x00003fe080000000..0x00003fe0fffeffff -> 0x0000000080000000 MEM 0x0000210000000000..0x000021ffffffffff -> 0x0000210000000000 (M64 #0..15) Using M64 #15 as default window 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x10000000000 [segment=0x100000000] Allocated bitmap for 2040 MSIs (base IRQ 0x1000) Initializing IODA2 PHB (/pciex@3fffe40200000) PCI host bridge /pciex@3fffe40200000 ranges: MEM 0x00003fe100000000..0x00003fe17ffeffff -> 0x0000000080000000 MEM 0x0000220000000000..0x000022ffffffffff -> 0x0000220000000000 (M64 #0..15) Using M64 #15 as default window 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x10000000000 [segment=0x100000000] Allocated bitmap for 2040 MSIs (base IRQ 0x1800) Initializing IODA2 PHB (/pciex@3fffe40300000) PCI host bridge /pciex@3fffe40300000 ranges: MEM 0x00003fe180000000..0x00003fe1fffeffff -> 0x0000000080000000 MEM 0x0000230000000000..0x000023ffffffffff -> 0x0000230000000000 (M64 #0..15) Using M64 #15 as default window 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x10000000000 [segment=0x100000000] Allocated bitmap for 2040 MSIs (base IRQ 0x2000) Initializing IODA2 PHB (/pciex@3fffe40400000) PCI host bridge /pciex@3fffe40400000 ranges: MEM 0x00003fe200000000..0x00003fe27ffeffff -> 0x0000000080000000 MEM 0x0000240000000000..0x000024ffffffffff -> 0x0000240000000000 (M64 #0..15) Using M64 #15 as default window 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x10000000000 [segment=0x100000000] Allocated bitmap for 2040 MSIs (base IRQ 0x4800) Initializing IODA2 PHB (/pciex@3fffe40500000) PCI host bridge /pciex@3fffe40500000 ranges: MEM 0x00003fe280000000..0x00003fe2fffeffff -> 0x0000000080000000 MEM 0x0000250000000000..0x000025ffffffffff -> 0x0000250000000000 (M64 #0..15) Using M64 #15 as default window 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x10000000000 [segment=0x100000000] Allocated bitmap for 2040 MSIs (base IRQ 0x5000) Initializing IODA2 PHB (/pciex@3fffe40600000) PCI host bridge /pciex@3fffe40600000 ranges: MEM 0x00003fe300000000..0x00003fe37ffeffff -> 0x0000000080000000 MEM 0x0000260000000000..0x000026ffffffffff -> 0x0000260000000000 (M64 #0..15) Using M64 #15 as default window 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x10000000000 [segment=0x100000000] Allocated bitmap for 2040 MSIs (base IRQ 0x5800) Initializing IODA2 PHB (/pciex@3fffe40700000) PCI host bridge /pciex@3fffe40700000 ranges: MEM 0x00003fe380000000..0x00003fe3fffeffff -> 0x0000000080000000 MEM 0x0000270000000000..0x000027ffffffffff -> 0x0000270000000000 (M64 #0..15) Using M64 #15 as default window 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x10000000000 [segment=0x100000000] Allocated bitmap for 2040 MSIs (base IRQ 0x6000) Initializing NPU_NVLINK PHB (/pciex@3fff000400000) PCI host bridge /pciex@3fff000400000 ranges: MEM 0x0003fff000410000..0x0003fff00049ffff -> 0x0003fff000410000 Not support M64 window 004 (000) PE's M32: 0xa0000 [segment=0x28000] Initializing NPU_NVLINK PHB (/pciex@3fff001400000) PCI host bridge /pciex@3fff001400000 ranges: MEM 0x0003fff001410000..0x0003fff00149ffff -> 0x0003fff001410000 Not support M64 window 004 (000) PE's M32: 0xa0000 [segment=0x28000] OPAL nvram setup, 589824 bytes barrier-nospec: using ORI speculation barrier Zone ranges: DMA [mem 0x0000000000000000-0x0000003fffffffff] DMA32 empty Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x0000001fffffffff] node 1: [mem 0x0000002000000000-0x0000003fffffffff] Initmem setup node 0 [mem 0x0000000000000000-0x0000001fffffffff] Initmem setup node 1 [mem 0x0000002000000000-0x0000003fffffffff] random: get_random_u64 called from start_kernel+0xac/0x624 with crng_init=0 percpu: Embedded 4 pages/cpu @(____ptrval____) s167448 r0 d94696 u262144 Built 2 zonelists, mobility grouping on. Total pages: 4190208 Policy zone: DMA Kernel command line: rw root=/dev/mapper/ca_ltc--garri5-root log_buf_len individual max cpu contribution: 8192 bytes log_buf_len total cpu_extra contributions: 1302528 bytes log_buf_len min size: 262144 bytes log_buf_len: 2097152 bytes early log buf free: 250784(95%) Memory: 254167360K/268435456K available (10496K kernel code, 1536K rwdata, 2880K rodata, 2752K init, 1389K bss, 833216K reserved, 13434880K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=160, Nodes=2 rcu: Hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=160. Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=160 NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 ICS OPAL backend registered clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns clocksource: timebase mult[1f40000] shift[24] registered Console: colour dummy device 80x25 console [hvc0] enabled console [hvc0] enabled bootconsole [udbg0] disabled bootconsole [udbg0] disabled mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl pid_max: default: 163840 minimum: 1280 Dentry cache hash table entries: 16777216 (order: 11, 134217728 bytes) Inode-cache hash table entries: 8388608 (order: 10, 67108864 bytes) Mount-cache hash table entries: 262144 (order: 5, 2097152 bytes) Mountpoint-cache hash table entries: 262144 (order: 5, 2097152 bytes) *** VALIDATE proc *** *** VALIDATE cgroup1 *** *** VALIDATE cgroup2 *** EEH: PowerNV platform initialized POWER8 performance monitor hardware support registered rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... smp: Brought up 2 nodes, 160 CPUs numa: Node 0 CPUs: 0-79 numa: Node 1 CPUs: 80-159 Using standard scheduler topology devtmpfs: initialized kworker/u321:0 (815) used greatest stack depth: 12400 bytes left clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 65536 (order: 7, 8388608 bytes) NET: Registered protocol family 16 audit: initializing netlink subsys (disabled) audit: type=2000 audit(1539350042.440:1): state=initialized audit_enabled=0 res=1 cpuidle: using governor menu pstore: Registered nvram as persistent store backend PCI: Probing PCI hardware PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x3fe000000000-0x3fe07ffeffff] (bus address [0x80000000-0xfffeffff]) pci_bus 0000:00: root bus resource [mem 0x200000000000-0x20fdffffffff 64bit pref] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:01:00.0: BAR0 [mem size 0x00004000 64bit]: requesting alignment to 0x10000 pci 0000:00:00.0: PCI bridge to [bus 01] PCI host bridge to bus 0001:00 pci_bus 0001:00: root bus resource [mem 0x3fe080000000-0x3fe0fffeffff] (bus address [0x80000000-0xfffeffff]) pci_bus 0001:00: root bus resource [mem 0x210000000000-0x21fdffffffff 64bit pref] pci_bus 0001:00: root bus resource [bus 00-ff] pci 0001:01:00.0: BAR0 [mem size 0x00001000 64bit]: requesting alignment to 0x10000 pci 0001:01:00.0: BAR2 [mem size 0x00004000 64bit]: requesting alignment to 0x10000 pci 0001:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x8 link at 0001:00:00.0 (capable of 63.008 Gb/s with 8 GT/s x8 link) pci 0001:01:00.1: BAR0 [mem size 0x00001000 64bit]: requesting alignment to 0x10000 pci 0001:01:00.1: BAR2 [mem size 0x00004000 64bit]: requesting alignment to 0x10000 pci 0001:00:00.0: PCI bridge to [bus 01] PCI host bridge to bus 0002:00 pci_bus 0002:00: root bus resource [mem 0x3fe100000000-0x3fe17ffeffff] (bus address [0x80000000-0xfffeffff]) pci_bus 0002:00: root bus resource [mem 0x220000000000-0x22fdffffffff 64bit pref] pci_bus 0002:00: root bus resource [bus 00-ff] pci 0002:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0002:00:00.0 (capable of 126.016 Gb/s with 8 GT/s x16 link) pci 0002:00:00.0: PCI bridge to [bus 01] PCI host bridge to bus 0003:00 pci_bus 0003:00: root bus resource [mem 0x3fe180000000-0x3fe1fffeffff] (bus address [0x80000000-0xfffeffff]) pci_bus 0003:00: root bus resource [mem 0x230000000000-0x23fdffffffff 64bit pref] pci_bus 0003:00: root bus resource [bus 00-ff] pci 0003:00:00.0: PCI bridge to [bus 01-ff] PCI host bridge to bus 0008:00 pci_bus 0008:00: root bus resource [mem 0x3fe200000000-0x3fe27ffeffff] (bus address [0x80000000-0xfffeffff]) pci_bus 0008:00: root bus resource [mem 0x240000000000-0x24fdffffffff 64bit pref] pci_bus 0008:00: root bus resource [bus 00-ff] pci 0008:00:00.0: PCI bridge to [bus 01] PCI host bridge to bus 0009:00 pci_bus 0009:00: root bus resource [mem 0x3fe280000000-0x3fe2fffeffff] (bus address [0x80000000-0xfffeffff]) pci_bus 0009:00: root bus resource [mem 0x250000000000-0x25fdffffffff 64bit pref] pci_bus 0009:00: root bus resource [bus 00-ff] pci 0009:00:00.0: PCI bridge to [bus 01-07] pci 0009:01:00.0: PCI bridge to [bus 02-07] pci 0009:03:00.0: BAR2 [mem size 0x00002000 64bit]: requesting alignment to 0x10000 pci 0009:03:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0009:02:01.0 (capable of 7.876 Gb/s with 8 GT/s x1 link) pci 0009:02:01.0: PCI bridge to [bus 03] pci 0009:04:00.0: BAR5 [mem size 0x00000800]: requesting alignment to 0x10000 pci 0009:04:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x2 link at 0009:02:02.0 (capable of 15.752 Gb/s with 8 GT/s x2 link) pci 0009:02:02.0: PCI bridge to [bus 04] pci 0009:02:03.0: PCI bridge to [bus 05-06] pci_bus 0009:06: extended config space not accessible pci 0009:05:00.0: PCI bridge to [bus 06] pci 0009:07:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0009:02:04.0 (capable of 7.876 Gb/s with 8 GT/s x1 link) random: fast init done pci 0009:02:04.0: PCI bridge to [bus 07] PCI host bridge to bus 000a:00 pci_bus 000a:00: root bus resource [mem 0x3fe300000000-0x3fe37ffeffff] (bus address [0x80000000-0xfffeffff]) pci_bus 000a:00: root bus resource [mem 0x260000000000-0x26fdffffffff 64bit pref] pci_bus 000a:00: root bus resource [bus 00-ff] pci 000a:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 000a:00:00.0 (capable of 126.016 Gb/s with 8 GT/s x16 link) pci 000a:00:00.0: PCI bridge to [bus 01] PCI host bridge to bus 000b:00 pci_bus 000b:00: root bus resource [mem 0x3fe380000000-0x3fe3fffeffff] (bus address [0x80000000-0xfffeffff]) pci_bus 000b:00: root bus resource [mem 0x270000000000-0x27fdffffffff 64bit pref] pci_bus 000b:00: root bus resource [bus 00-ff] pci 000b:00:00.0: PCI bridge to [bus 01-ff] PCI host bridge to bus 0004:00 pci_bus 0004:00: root bus resource [mem 0x3fff000410000-0x3fff00049ffff] pci_bus 0004:00: root bus resource [bus 00-ff] PCI host bridge to bus 0005:00 pci_bus 0005:00: root bus resource [mem 0x3fff001410000-0x3fff00149ffff] pci_bus 0005:00: root bus resource [bus 00-ff] pci 0000:00:00.0: BAR 8: assigned [mem 0x3fe000000000-0x3fe0007fffff] pci 0000:01:00.0: BAR 6: assigned [mem 0x3fe000000000-0x3fe00001ffff pref] pci 0000:01:00.0: BAR 0: assigned [mem 0x3fe000020000-0x3fe000023fff 64bit] pci 0000:01:00.0: BAR 4: assigned [mem 0x3fe000030000-0x3fe00003ffff 64bit] pci 0000:00 : [PE# fe] Secondary bus 0 associated with PE#fe pci 0000:01 : [PE# fd] Secondary bus 1 associated with PE#fd pci 0000:01 : [PE# fd] Setting up 32-bit TCE table at 0..80000000 IOMMU table initialized, virtual merging enabled pci 0000:01 : [PE# fd] Setting up window#0 0..7fffffff pg=1000 pci 0000:01 : [PE# fd] Enabling 64-bit DMA bypass iommu: Adding device 0000:01:00.0 to group 0 pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [mem 0x3fe000000000-0x3fe07fefffff] pci 0001:00:00.0: BAR 8: assigned [mem 0x3fe080000000-0x3fe0807fffff] pci 0001:01:00.0: BAR 6: assigned [mem 0x3fe080000000-0x3fe08003ffff pref] pci 0001:01:00.1: BAR 6: assigned [mem 0x3fe080040000-0x3fe08007ffff pref] pci 0001:01:00.0: BAR 0: assigned [mem 0x3fe080080000-0x3fe080080fff 64bit] pci 0001:01:00.0: BAR 2: assigned [mem 0x3fe080090000-0x3fe080093fff 64bit] pci 0001:01:00.1: BAR 0: assigned [mem 0x3fe0800a0000-0x3fe0800a0fff 64bit] pci 0001:01:00.1: BAR 2: assigned [mem 0x3fe0800b0000-0x3fe0800b3fff 64bit] pci 0001:01:00.0: BAR 4: no space for [io size 0x0100] pci 0001:01:00.0: BAR 4: failed to assign [io size 0x0100] pci 0001:01:00.1: BAR 4: no space for [io size 0x0100] pci 0001:01:00.1: BAR 4: failed to assign [io size 0x0100] pci 0001:00 : [PE# fe] Secondary bus 0 associated with PE#fe pci 0001:01 : [PE# fd] Secondary bus 1 associated with PE#fd pci 0001:01 : [PE# fd] Setting up 32-bit TCE table at 0..80000000 pci 0001:01 : [PE# fd] Setting up window#0 0..7fffffff pg=1000 pci 0001:01 : [PE# fd] Enabling 64-bit DMA bypass iommu: Adding device 0001:01:00.0 to group 1 iommu: Adding device 0001:01:00.1 to group 1 pci 0001:00:00.0: PCI bridge to [bus 01] pci 0001:00:00.0: bridge window [mem 0x3fe080000000-0x3fe0ffefffff] pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc pci 0002:00:00.0: BAR 9: assigned [mem 0x220000000000-0x2205ffffffff 64bit pref] pci 0002:00:00.0: BAR 8: assigned [mem 0x3fe100000000-0x3fe100ffffff] pci 0002:01:00.0: BAR 1: assigned [mem 0x220000000000-0x2203ffffffff 64bit pref] pci 0002:01:00.0: BAR 3: assigned [mem 0x220400000000-0x220401ffffff 64bit pref] pci 0002:01:00.0: BAR 0: assigned [mem 0x3fe100000000-0x3fe100ffffff] pci 0002:00 : [PE# fe] Secondary bus 0 associated with PE#fe pci 0002:01 : [PE# 00] Secondary bus 1 associated with PE#0 pci 0002:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 pci 0002:01 : [PE# 00] Setting up window#0 0..7fffffff pg=1000 pci 0002:01 : [PE# 00] Enabling 64-bit DMA bypass iommu: Adding device 0002:01:00.0 to group 2 pci 0002:00:00.0: PCI bridge to [bus 01] pci 0002:00:00.0: bridge window [mem 0x3fe100000000-0x3fe17fefffff] pci 0002:00:00.0: bridge window [mem 0x220000000000-0x22fdfff0ffff 64bit pref] pci 0003:00 : [PE# fe] Secondary bus 0 associated with PE#fe pci 0003:00:00.0: PCI bridge to [bus 01-ff] pci 0008:00:00.0: BAR 9: assigned [mem 0x240000000000-0x2400ffffffff 64bit pref] pci 0008:00:00.0: BAR 8: assigned [mem 0x3fe200000000-0x3fe2007fffff] pci 0008:01:00.0: BAR 0: assigned [mem 0x240000000000-0x2400007fffff 64bit pref] pci 0008:01:00.0: BAR 2: assigned [mem 0x240000800000-0x240000ffffff 64bit pref] pci 0008:01:00.1: BAR 0: assigned [mem 0x240001000000-0x2400017fffff 64bit pref] pci 0008:01:00.1: BAR 2: assigned [mem 0x240001800000-0x240001ffffff 64bit pref] pci 0008:01:00.2: BAR 0: assigned [mem 0x240002000000-0x2400027fffff 64bit pref] pci 0008:01:00.2: BAR 2: assigned [mem 0x240002800000-0x240002ffffff 64bit pref] pci 0008:01:00.3: BAR 0: assigned [mem 0x240003000000-0x2400037fffff 64bit pref] pci 0008:01:00.3: BAR 2: assigned [mem 0x240003800000-0x240003ffffff 64bit pref] pci 0008:01:00.0: BAR 6: assigned [mem 0x3fe200000000-0x3fe20003ffff pref] pci 0008:01:00.1: BAR 6: assigned [mem 0x3fe200040000-0x3fe20007ffff pref] pci 0008:01:00.2: BAR 6: assigned [mem 0x3fe200080000-0x3fe2000bffff pref] pci 0008:01:00.3: BAR 6: assigned [mem 0x3fe2000c0000-0x3fe2000fffff pref] pci 0008:01:00.0: BAR 4: assigned [mem 0x240004000000-0x24000400ffff 64bit pref] pci 0008:01:00.1: BAR 4: assigned [mem 0x240004010000-0x24000401ffff 64bit pref] pci 0008:01:00.2: BAR 4: assigned [mem 0x240004020000-0x24000402ffff 64bit pref] pci 0008:01:00.3: BAR 4: assigned [mem 0x240004030000-0x24000403ffff 64bit pref] pci 0008:00 : [PE# fe] Secondary bus 0 associated with PE#fe pci 0008:01 : [PE# 00] Secondary bus 1 associated with PE#0 pci 0008:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 pci 0008:01 : [PE# 00] Setting up window#0 0..7fffffff pg=1000 pci 0008:01 : [PE# 00] Enabling 64-bit DMA bypass iommu: Adding device 0008:01:00.0 to group 3 iommu: Adding device 0008:01:00.1 to group 3 iommu: Adding device 0008:01:00.2 to group 3 iommu: Adding device 0008:01:00.3 to group 3 pci 0008:00:00.0: PCI bridge to [bus 01] pci 0008:00:00.0: bridge window [mem 0x3fe200000000-0x3fe27fefffff] pci 0008:00:00.0: bridge window [mem 0x240000000000-0x24fdfff0ffff 64bit pref] pci 0009:00:00.0: BAR 9: assigned [mem 0x250000000000-0x2500ffffffff 64bit pref] pci 0009:00:00.0: BAR 8: assigned [mem 0x3fe280000000-0x3fe282ffffff] pci 0009:01:00.0: BAR 9: assigned [mem 0x250000000000-0x2500ffffffff 64bit pref] pci 0009:01:00.0: BAR 8: assigned [mem 0x3fe280000000-0x3fe2827fffff] pci 0009:01:00.0: BAR 0: assigned [mem 0x3fe282800000-0x3fe28283ffff] pci 0009:01:00.0: BAR 7: no space for [io size 0x2000] pci 0009:01:00.0: BAR 7: failed to assign [io size 0x2000] pci 0009:02:04.0: BAR 9: assigned [mem 0x250000000000-0x2500ffffffff 64bit pref] pci 0009:02:01.0: BAR 8: assigned [mem 0x3fe280000000-0x3fe2807fffff] pci 0009:02:02.0: BAR 8: assigned [mem 0x3fe280800000-0x3fe280ffffff] pci 0009:02:03.0: BAR 8: assigned [mem 0x3fe281000000-0x3fe2827fffff] pci 0009:02:02.0: BAR 7: no space for [io size 0x1000] pci 0009:02:02.0: BAR 7: failed to assign [io size 0x1000] pci 0009:02:03.0: BAR 7: no space for [io size 0x1000] pci 0009:02:03.0: BAR 7: failed to assign [io size 0x1000] pci 0009:03:00.0: BAR 0: assigned [mem 0x3fe280000000-0x3fe28000ffff 64bit] pci 0009:03:00.0: BAR 2: assigned [mem 0x3fe280010000-0x3fe280011fff 64bit] pci 0009:00 : [PE# fe] Secondary bus 0 associated with PE#fe pci 0009:03 : [PE# fd] Secondary bus 3 associated with PE#fd pci 0009:03 : [PE# fd] Setting up 32-bit TCE table at 0..80000000 pci 0009:03 : [PE# fd] Setting up window#0 0..7fffffff pg=1000 pci 0009:03 : [PE# fd] Enabling 64-bit DMA bypass iommu: Adding device 0009:03:00.0 to group 4 pci 0009:02:01.0: PCI bridge to [bus 03] pci 0009:02:01.0: bridge window [mem 0x3fe280000000-0x3fe2807fffff] pci 0009:04:00.0: BAR 5: assigned [mem 0x3fe280800000-0x3fe2808007ff] pci 0009:04:00.0: BAR 6: assigned [mem 0x3fe280810000-0x3fe28081ffff pref] pci 0009:04:00.0: BAR 4: no space for [io size 0x0020] pci 0009:04:00.0: BAR 4: failed to assign [io size 0x0020] pci 0009:04:00.0: BAR 0: no space for [io size 0x0008] pci 0009:04:00.0: BAR 0: failed to assign [io size 0x0008] pci 0009:04:00.0: BAR 2: no space for [io size 0x0008] pci 0009:04:00.0: BAR 2: failed to assign [io size 0x0008] pci 0009:04:00.0: BAR 1: no space for [io size 0x0004] pci 0009:04:00.0: BAR 1: failed to assign [io size 0x0004] pci 0009:04:00.0: BAR 3: no space for [io size 0x0004] pci 0009:04:00.0: BAR 3: failed to assign [io size 0x0004] pci 0009:04 : [PE# fc] Secondary bus 4 associated with PE#fc pci 0009:04 : [PE# fc] Setting up 32-bit TCE table at 0..80000000 pci 0009:04 : [PE# fc] Setting up window#0 0..7fffffff pg=1000 pci 0009:04 : [PE# fc] Enabling 64-bit DMA bypass iommu: Adding device 0009:04:00.0 to group 5 pci 0009:02:02.0: PCI bridge to [bus 04] pci 0009:02:02.0: bridge window [mem 0x3fe280800000-0x3fe280ffffff] pci 0009:05:00.0: BAR 8: assigned [mem 0x3fe281000000-0x3fe2827fffff] pci 0009:05:00.0: BAR 7: no space for [io size 0x1000] pci 0009:05:00.0: BAR 7: failed to assign [io size 0x1000] pci 0009:06:00.0: BAR 0: assigned [mem 0x3fe281000000-0x3fe281ffffff] pci 0009:06:00.0: BAR 1: assigned [mem 0x3fe282000000-0x3fe28201ffff] pci 0009:06:00.0: BAR 2: no space for [io size 0x0080] pci 0009:06:00.0: BAR 2: failed to assign [io size 0x0080] pci 0009:06 : [PE# fb] Secondary bus 6..6 associated with PE#fb pci 0009:06 : [PE# fb] Setting up 32-bit TCE table at 0..80000000 pci 0009:06 : [PE# fb] Setting up window#0 0..7fffffff pg=1000 pci 0009:06 : [PE# fb] Enabling 64-bit DMA bypass iommu: Adding device 0009:06:00.0 to group 6 pci 0009:05:00.0: PCI bridge to [bus 06] pci 0009:05:00.0: bridge window [mem 0x3fe281000000-0x3fe2827fffff] pci 0009:05 : [PE# fa] Secondary bus 5 associated with PE#fa pci 0009:02:03.0: PCI bridge to [bus 05-06] pci 0009:02:03.0: bridge window [mem 0x3fe281000000-0x3fe2827fffff] pci 0009:07:00.0: BAR 0: assigned [mem 0x250000000000-0x25000000ffff 64bit pref] pci 0009:07:00.0: BAR 2: assigned [mem 0x250000010000-0x25000001ffff 64bit pref] pci 0009:07:00.0: BAR 4: assigned [mem 0x250000020000-0x25000002ffff 64bit pref] pci 0009:07:00.1: BAR 0: assigned [mem 0x250000030000-0x25000003ffff 64bit pref] pci 0009:07:00.1: BAR 2: assigned [mem 0x250000040000-0x25000004ffff 64bit pref] pci 0009:07:00.1: BAR 4: assigned [mem 0x250000050000-0x25000005ffff 64bit pref] pci 0009:07 : [PE# 00] Secondary bus 7 associated with PE#0 pci 0009:07 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 pci 0009:07 : [PE# 00] Setting up window#0 0..7fffffff pg=1000 pci 0009:07 : [PE# 00] Enabling 64-bit DMA bypass iommu: Adding device 0009:07:00.0 to group 7 iommu: Adding device 0009:07:00.1 to group 7 pci 0009:02:04.0: PCI bridge to [bus 07] pci 0009:02:04.0: bridge window [mem 0x250000000000-0x2500ffffffff 64bit pref] pci 0009:02 : [PE# f9] Secondary bus 2 associated with PE#f9 pci 0009:01:00.0: PCI bridge to [bus 02-07] pci 0009:01:00.0: bridge window [mem 0x3fe280000000-0x3fe2ffefffff] pci 0009:01:00.0: bridge window [mem 0x250000000000-0x25fdfff0ffff 64bit pref] pci 0009:01 : [PE# f8] Secondary bus 1 associated with PE#f8 pci 0009:00:00.0: PCI bridge to [bus 01-07] pci 0009:00:00.0: bridge window [mem 0x3fe280000000-0x3fe2ffefffff] pci 0009:00:00.0: bridge window [mem 0x250000000000-0x25fdfff0ffff 64bit pref] pci_bus 0009:00: Some PCI device resources are unassigned, try booting with pci=realloc pci 000a:00:00.0: BAR 9: assigned [mem 0x260000000000-0x2605ffffffff 64bit pref] pci 000a:00:00.0: BAR 8: assigned [mem 0x3fe300000000-0x3fe300ffffff] pci 000a:01:00.0: BAR 1: assigned [mem 0x260000000000-0x2603ffffffff 64bit pref] pci 000a:01:00.0: BAR 3: assigned [mem 0x260400000000-0x260401ffffff 64bit pref] pci 000a:01:00.0: BAR 0: assigned [mem 0x3fe300000000-0x3fe300ffffff] pci 000a:00 : [PE# fe] Secondary bus 0 associated with PE#fe cpi 000a:1 0 : [P E 00#] Secodanry bus 1 [PE# 03] Associated device to PE pci 0004:00:00.1: Associating to existing PE 3 pci 0004:00:01.0: [PE# 02] Associated device to PE pci 0004:00:01.1: Associating to existing PE 2 pci 0005:00:00.0: [PE# 03] Associated device to PE pci 0005:00:00.1: Associating to existing PE 3 pci 0005:00:01.0: [PE# 02] Associated device to PE pci 0005:00:01.1: Associating to existing PE 2 pci 0002:01 : [PE# 00] Attached NPU 0004:00:01.0 iommu: Adding device 0004:00:01.0 to group 2 pci 0002:01 : [PE# 00] Attached NPU 0004:00:01.1 iommu: Adding device 0004:00:01.1 to group 2 pci 000a:01 : [PE# 00] Attached NPU 0005:00:01.0 iommu: Adding device 0005:00:01.0 to group 8 pci 000a:01 : [PE# 00] Attached NPU 0005:00:01.1 iommu: Adding device 0005:00:01.1 to group 8 pci 0000:00:00.0: enabling device (0101 -> 0103) pci 0001:00:00.0: enabling device (0101 -> 0103) pci 0002:00:00.0: enabling device (0101 -> 0103) pci 0008:00:00.0: enabling device (0101 -> 0103) pci 0009:00:00.0: enabling device (0101 -> 0103) pci 0009:01:00.0: enabling device (0141 -> 0143) pci 0009:02:01.0: enabling device (0141 -> 0143) pci 0009:02:02.0: enabling device (0141 -> 0143) pci 0009:02:03.0: enabling device (0141 -> 0143) pci 0009:05:00.0: enabling device (0141 -> 0143) pci 0009:02:04.0: enabling device (0141 -> 0143) pci 000a:00:00.0: enabling device (0101 -> 0103) EEH: PCI Enhanced I/O Error Handling Enabled powernv-rng: Registering arch random hook. HugeTLB registered 16.0 MiB page size, pre-allocated 0 pages HugeTLB registered 16.0 GiB page size, pre-allocated 0 pages random: crng init done pci 0009:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none pci 0009:06:00.0: vgaarb: bridge control possible pci 0009:06:00.0: vgaarb: setting as boot device (VGA legacy resources not available) vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered clocksource: Switched to clocksource timebase *** VALIDATE hugetlbfs *** NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 65536 (order: 4, 1048576 bytes) TCP established hash table entries: 524288 (order: 6, 4194304 bytes) TCP bind hash table entries: 65536 (order: 4, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) UDP hash table entries: 65536 (order: 5, 2097152 bytes) UDP-Lite hash table entries: 65536 (order: 5, 2097152 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0009:03:00.0: enabling device (0140 -> 0142) pci 0009:03:00.0: xHCI HW did not halt within 16000 usec status = 0x0 pci 0009:03:00.0: quirk_usb_early_handoff+0x0/0xd50 took 15807 usecs Trying to unpack rootfs image as initramfs... Freeing initrd memory: 22144K workingset: timestamp_bits=38 max_order=22 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered pstore: using deflate compression Block laye rSCS Iegerinc (bs)g drivr veersion .4 lo0aed (dmajor 25registered io scheduler kyber registered pci 0009:06:00.0: enabling device (0141 -> 0143) Using unsupported 1024x768 (null) at 3fe281010000, depth=32, pitch=4096 Console: switching to colour frame buffer device 128x48 fb0: Open Firmware frame buffer device on /pciex@3fffe40500000/pci@0/pci@0/pci@3/pci@0/vga@0 hvc0: raw protocol on /ibm,opal/consoles/serial@0 (boot console) hvc0: No interrupts property, using OPAL event Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 ipr: IBM Power RAID SCSI Device Driver version: 2.6.4 (March 14, 2017) ahci 0009:04:00.0: enabling device (0541 -> 0543) ahci 0009:04:00.0: Using 64-bit DMA iommu bypass ahci 0009:04:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode ahci 0009:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs scsi host0: ahci scsi host1: ahci scsi host2: ahci scsi host3: ahci ata1: SATA max UDMA/133 abar m2048@0x3fe280800000 port 0x3fe280800100 irq 482 ata2: SATA max UDMA/133 abar m2048@0x3fe280800000 port 0x3fe280800180 irq 482 ata3: SATA max UDMA/133 abar m2048@0x3fe280800000 port 0x3fe280800200 irq 482 ata4: SATA max UDMA/133 abar m2048@0x3fe280800000 port 0x3fe280800280 irq 482 libphy: Fixed MDIO Bus: probed tg3.c:v3.137 (May 11, 2014) tg3 0009:07:00.0: enabling device (0140 -> 0142) tg3 0009:07:00.0: Using 64-bit DMA iommu bypass tg3 0009:07:00.0 eth0: Tigon3 [partno(BCM95718) rev 5717100] (PCI Express) MAC address 70:e2:84:14:0a:92 tg3 0009:07:00.0 eth0: attached PHY is 5718C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) tg3 0009:07:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] tg3 0009:07:00.0 eth0: dma_rwctrl[00000000] dma_mask[64-bit] tg3 0009:07:00.1: enabling device (0140 -> 0142) tg3 0009:07:00.1: Using 64-bit DMA iommu bypass tg3 0009:07:00.1 eth1: Tigon3 [partno(BCM95718) rev 5717100] (PCI Express) MAC address 70:e2:84:14:0a:93 tg3 0009:07:00.1 eth1: attached PYH is5 718C [ 3.625299] rtc-opal opal- [ 3.629796] device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com powernv-cpufreq: cpufreq pstate min 0xffffffc5 nominal 0xffffffdd max 0x0 powernv-cpufreq: Workload Optimized Frequency is enabled in the platform nx_compress_powernv: coprocessor found on chip 0, CT 3 CI 1 nx_compress_powernv: coprocessor found on chip 1, CT 3 CI 2 usbcore: registered new interface driver usbhid usbhid: USB HID core driver oprofile: using timer interrupt. ipip: IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered drmem: No dynamic reconfiguration memory found registered taskstats version 1 console [netcon0] enabled netconsole: network logging started rtc-opal opal-rtc: setting system clock to 2018-10-12 13:14:05 UTC (1539350045) ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata2.00: ATA-10: ST1000NX0313 00LY266 00LY265IBM, BE33, max UDMA/133 ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA ata1.00: ATA-10: ST1000NX0313 00LY266 00LY265IBM, BE33, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA ata2.00: configured for UDMA/133 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST1000NX0313 BE33 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA ST1000NX0313 BE33 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] 4096-byte physical blocks sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI removable disk sd 1:0:0:0: [sdb] Attached SCSI removable disk Freeing unused kernel memory: 2752K This architecture does not have kernel memory protection. Run /init as init process systemd[1]: Failed to insert module 'autofs4' systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) systemd[1]: Detected architecture ppc64-le. systemd[1]: Running in initial RAM disk. Welcome to CentOS Linux 7 (AltArch) dracut-033-535.el7 (Initramfs)! [ 4.074884] systemd[1]: Set hostname to . [ OK ] Reached target Timers. [ 4.124400] systemd[1]: Reached target Timers. [ 4.124445] systemd[1]: Starting Timers. [ OK ] Reached target Local File Systems. [ 4.124697] systemd[1]: Reached target Local File Systems. [ 4.124875] systemd[1]: Starting Local File Systems. [ OK ] Reached target Swap. [ 4.125050] systemd[1]: Reached target Swap. [ 4.125078] systemd[1]: Starting Swap. [ OK ] Created slice Root Slice. [ OK ] Listening on Journal Socket. [ OK ] Created slice System Slice. [ OK ] Reached target Slices. Starting dracut cmdline hook... Starting Setup Virtual Console... Starting Create list of required st... nodes for the current kernel... Starting Journal Service... [ OK ] Listening on udev Control Socket. [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Sockets. Starting Apply Kernel Variables... [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Create Static Device Nodes in /dev... [ OK ] Started Apply Kernel Variables. [[ 4.273389] s OK etfont (2787) used greatest stac] k depth: 10656 bStarted Create Sytes left tatic Device Nodes in /dev. [ OK ] Started Journal Service. [ OK ] Started dracut cmdline hook. Starting dracut pre-udev hook... [ OK ] Started dracut pre-udev hook. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting udev Coldplug all Devices... [ OK ] Started Setup Virtual Console. nvme nvme0: pci function 0000:01:00.0 nvme 0000:01:00.0: enabling device (0140 -> 0142) nvme 0000:01:00.0: Using 64-bit DMA iommu bypass tg3 0009:07:00.0 enP9p7s0f0: renamed from eth0 bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712[ 4.396593] Emulex LightPulse Fibre Channel SCSI driver 12.0.0.7 Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries. lpfc 0001:01:00.0: enabling device (0140 -> 0142) lpfc 0001:01:00.0: Using 64-bit DMA iommu bypass scsi host4: Emulex LPe12000 PCIe Fibre Channel Adapter on PCI bus 01 device 00 irq 493 synth uevent: /devices/vio: failed to send uevent vio vio: uevent: failed to send synthetic uevent bnx2x 0008:01:00.0: enabling device (0140 -> 0142) ead cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] 4096-byte physical blocks sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI removable disk sd 1:0:0:0: [sdb] Attached SCSI removable disk Freeing unused kernel memory: 2752K This architecture does not have kernel memory protection. Run /init as init process systemd[1]: Failed to insert module 'autofs4' systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.074596] systemd[1]: Detected architecture ppc64-le. [ 4.074613] systemd[1]: Running in initial RAM disk. Welcome to CentOS Linux 7 (AltArch) dracut-033-535.el7 (Initramfs)! [ 4.074884] systemd[1]: Set hostname to . [ OK ] Reached target Timers. [ 4.124400] systemd[1]: Reached target Timers. [ 4.124445] systemd[1]: Starting Timers. [ OK ] Reached target Local File Systems. [ 4.124697] systemd[1]: Reached target Local File Systems. [ 4.124875] systemd[1]: Starting Local File Systems. [ OK ] Reached target Swap. [ 4.125050] systemd[1]: Reached target Swap. [ 4.125078] systemd[1]: Starting Swap. [ OK ] Created slice Root Slice. [ OK ] Listening on Journal Socket. [ OK ] Created slice System Slice. [ OK ] Reached target Slices. Starting dracut cmdline hook... Starting Setup Virtual Console... Starting Create list of required st... nodes for the current kernel... Starting Journal Service... [ OK ] Listening on udev Control Socket. [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Sockets. Starting Apply Kernel Variables... [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Create Static Device Nodes in /dev... [ OK ] Started Apply Kernel Variables. [[ 4.273389] s OK etfont (2787) used greatest stac] k depth: 10656 bStarted Create Sytes left tatic Device Nodes in /dev. [ OK ] Started Journal Service. [ OK ] Started dracut cmdline hook. Starting dracut pre-udev hook... [ OK ] Started dracut pre-udev hook. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting udev Coldplug all Devices... [ OK ] Started Setup Virtual Console. nvme nvme0: pci function 0000:01:00.0 nvme 0000:01:00.0: enabling device (0140 -> 0142) nvme 0000:01:00.0: Using 64-bit DMA iommu bypass tg3 0009:07:00.0 enP9p7s0f0: renamed from eth0 bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10) bnx2x 0008:01:00.0: msix capability found Emulex LightPulse Fibre Channel SCSI driver 12.0.0.7 Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries. lpfc 0001:01:00.0: enabling device (0140 -> 0142) lpfc 0001:01:00.0: Using 64-bit DMA iommu bypass scsi host4: Emulex LPe12000 PCIe Fibre Channel Adapter on PCI bus 01 device 00 irq 493 synth uevent: /devices/vio: failed to send uevent vio vio: uevent: failed to send synthetic uevent bnx2x 0008:01:00.0: enabling device (0140 -> 0142) bnx2x 0008:01:00.0: Using 64-bit DMA iommu bypass bnx2x 0008:01:00.0: part number 0-0-0-0 [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. Starting dracut initqueue hook... Starting Show Plymouth Boot Screen... [ OK ] Started Show Plymouth Boot Screen. [ OK ] Reached target Paths. [ OK ] Reached target Basic System. bnx2x 0008:01:00.0: 32.000 Gb/s available PCIe bandwidth (5 GT/s x8 link) tg3 0009:07:00.1 enP9p7s0f1: renamed from eth1 bnx2x 0008:01:00.1: msix capability found bnx2x 0008:01:00.1: enabling device (0140 -> 0142) bnx2x 0008:01:00.1: Using 64-bit DMA iommu bypass bnx2x 0008:01:00.1: part number 0-0-0-0 bnx2x 0008:01:00.1: 32.000 Gb/s available PCIe bandwidth (5 GT/s x8 link) bnx2x 0008:01:00.2: msix capability found bnx2x 0008:01:00.2: enabling device (0140 -> 0142) bnx2x 0008:01:00.2: Using 64-bit DMA iommu bypass bnx2x 0008:01:00.2: part number 0-0-0-0 bnx2x 0008:01:00.2: 32.000 Gb/s available PCIe bandwidth (5 GT/s x8 link) bnx2x 0008:01:00.3: msix capability found bnx2x 0008:01:00.3: enabling device (0140 -> 0142) bnx2x 0008:01:00.3: Using 64-bit DMA iommu bypass bnx2x 0008:01:00.3: part number 0-0-0-0 bnx2x 0008:01:00.3: 32.000 Gb/s available PCIe bandwidth (5 GT/s x8 link) bnx2x 0008:01:00.0 enP8p1s0f0: renamed from eth0 bnx2x 0008:01:00.1 enP8p1s0f1: renamed from eth1 bnx2x 0008:01:00.3 enP8p1s0f3: renamed from eth3 bnx2x 0008:01:00.2 enP8p1s0f2: renamed from eth2 print_req_error: critical medium error, dev nvme0n1, sector 0 Buffer I/O error on dev nvme0n1, logical block 0, async page read print_req_error: critical medium error, dev nvme0n1, sector 0 Buffer I/O error on dev nvme0n1, logical block 0, async page read nvme0n1: unable to read partition table print_req_error: critical medium error, dev nvme0n1, sector 0 print_req_error: critical medium error, dev nvme0n1, sector 0 Buffer I/O error on dev nvme0n1, logical block 0, async page read lpfc 0001:01:00.1: enabling device (0140 -> 0142) lpfc 0001:01:00.1: Using 64-bit DMA iommu bypass scsi host5: Emulex LPe12000 PCIe Fibre Channel Adapter on PCI bus 01 device 01 irq 494 lpfc 0001:01:00.0: 0:1303 Link Up Event x1 received Data: x1 x1 x20 x0 x0 x0 0 scsi 4:0:0:0: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6 sd 4:0:0:0: Power-on or device reset occurred sd 4:0:0:0: Attached scsi generic sg2 type 0 scsi 4:0:1:0: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6 sd 4:0:0:0: [sdc] 209715200 512-byte logical blocks: (107 GB/100 GiB) sd 4:0:1:0: Attached scsi generic sg3 type 0 sd 4:0:1:0: Power-on or device reset occurred sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 4:0:1:0: [sdd] 209715200 512-byte logical blocks: (107 GB/100 GiB) sd 4:0:1:0: [sdd] Write Protect is off sd 4:0:1:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA sdc: sdc1 sdc2 sdc3 sdd: sdd1 sdd2 sdd3 sd 4:0:0:0: [sdc] Attached SCSI disk sd 4:0:1:0: [sdd] Attached SCSI disk sd 4:0:0:0: Power-on or device reset occurred sd 4:0:1:0: Power-on or device reset occurred print_req_error: critical medium error, dev nvme0n1, sector 0 print_req_error: critical medium error, dev nvme0n1, sector 0 print_req_error: critical medium error, dev nvme0n1, sector 0 print_req_error: critical medium error, dev nvme0n1, sector 0 print_req_error: critical medium error, dev nvme0n1, sector 0 print_req_error: critical medium error, dev nvme0n1, sector 0 [ OK ] Found device /dev/mapper/ca_ltc--garri5-root. Starting File System Check on /dev/mapper/ca_ltc--garri5-root... [ OK ] Started File System Check on /dev/mapper/ca_ltc--garri5-root. [ OK ] Started dracut initqueue hook. Mounting /sysroot... [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. SGI XFS with ACLs, security attributes, no debug enabled XFS (dm-5): Mounting V5 Filesystem lpfc 0001:01:00.1: 1:1303 Link Up Event x1 received Data: x1 x1 x20 x0 x0 x0 0 XFS (dm-5): Starting recovery (logdev: internal) scsi 5:0:0:0: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6 sd 5:0:0:0: Power-on or device reset occurred sd 5:0:0:0: Attached scsi generic sg4 type 0 scsi 5:0:1:0: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6 sd 5:0:0:0: [sde] 209715200 512-byte logical blocks: (107 GB/100 GiB) sd 5:0:0:0: [sde] Write Protect is off sd 5:0:1:0: Attached scsi generic sg5 type 0 sd 5:0:1:0: Power-on or device reset occurred sd 5:0:0:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 5:0:1:0: [sdf] 209715200 512-byte logical blocks: (107 GB/100 GiB) sd 5:0:1:0: [sdf] Write Protect is off sd 5:0:1:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA sde: sde1 sde2 sde3 sdf: sdf1 sdf2 sdf3 sd 5:0:0:0: [sde] Attached SCSI disk sd 5:0:1:0: [sdf] Attached SCSI disk XFS (dm-5): Ending recovery (logdev: internal) mount (6240) used greatest stack depth: 9552 bytes left [ OK ] Mounted /sysroot. [ OK ] Reached target Initrd Root File System. Starting Reload Configuration from the Real Root... [ OK ] Started Reload Configuration from the Real Root. [ OK ] Reached target Initrd File Systems. [ OK ] Reached target Initrd Default Target. Starting dracut pre-pivot and cleanup hook... [ OK ] Started dracut pre-pivot and cleanup hook. Starting Cleaning Up and Shutting Down Daemons... [ OK ] Stopped target Timers. Starting Plymouth switch root service... [ OK ] Stopped Cleaning Up and Shutting Down Daemons. [ OK ] Stopped dracut pre-pivot and cleanup hook. Stopping dracut pre-pivot and cleanup hook... [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped dracut initqueue hook. Stopping dracut initqueue hook... [ OK ] Stopped target Initrd Default Target. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Stopped target System Initialization. [ OK ] Stopped Apply Kernel Variables. Stopping Apply Kernel Variables... [ OK ] Stopped udev Coldplug all Devices. Stopping udev Coldplug all Devices... Stopping udev Kernel Device Manager... [ OK ] Stopped target Local File Systems. [ OK ] Stopped target Swap. [ OK ] Stopped target Paths. [ OK ] Stopped target Sockets. [ OK ] Started Plymouth switch root service. [ OK ] Stopped udev Kernel Device Manager. [ OK ] Stopped Create Static Device Nodes in /dev. Stopping Create Static Device Nodes in /dev... [ OK ] Stopped Create list of required sta...ce nodes for the current kernel. Stopping Create list of required st... nodes for the current kernel... [ OK ] Stopped dracut pre-udev hook. Stopping dracut pre-udev hook... [ OK ] Stopped dracut cmdline hook. Stopping dracut cmdline hook... [ OK ] Closed udev Kernel Socket. [ OK ] Closed udev Control Socket. Starting Cleanup udevd DB... [ OK ] Started Cleanup udevd DB. [ OK ] Reached target Switch Root. Starting Switch Root... [ 11.425408] systemd-journald[2786]: Received SIGTERM from PID 1 (systemd). [ 11.533242] systemd: 24 output lines suppressed due to ratelimiting [ 12.128089] systemd[1]: Inserted module 'autofs4' [ 12.180852] systemd[1]: Inserted module 'ip_tables' Welcome to CentOS Linux 7 (AltArch)! [ 12.600037] systemd-sysv-generator[6436]: stat() failed on /etc/rc.d/init.d/autotest: No such file or directory [ OK ] Stopped Switch Root. [ OK ] Stopped Journal Service. Starting Journal Service... [ OK ] Reached target Host and Network Name Lookups. [ OK ] Listening on udev Control Socket. [ OK ] Listening on Delayed Shutdown Socket. [ OK ] Created slice system-selinux\x2dpol...grate\x2dlocal\x2dchanges.slice. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point. Mounting POSIX Message Queue File System... Starting Create list of required st... nodes for the current kernel... [ OK ] Created slice system-getty.slice. [ OK ] Stopped File System Check on Root Device. Stopping File System Check on Root Device... Starting Collect Read-Ahead Data... [ OK ] Listening on Device-mapper event daemon FIFOs. [ OK ] Listening on LVM2 poll daemon socket. [ OK ] Created slice system-serial\x2dgetty.slice. Mounting Huge Pages File System... Starting Replay Read-Ahead Data... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. Mounting Debug File System... Mounting NFSD configuration filesystem... [ OK ] Listening on LVM2 metadata daemon socket. Starting Monitoring of LVM2 mirrors... dmeventd or progress polling... [ OK ] Stopped target Switch Root. [ OK ] Stopped target Initrd Root File System. [ OK ] Stopped target Initrd File Systems. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on udev Kernel Socket. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Huge Pages File System. [ OK ] Started Journal Service. [ 13.819446] systemd-readahead[6475]: Failed to create fanotify object: Function not implemented [ OK ] Started Collect Read-Ahead Data. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Replay Read-Ahead Data. Starting Set Up Additional Binary Formats... [ 14.173354] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Starting Load legacy module configuration... Starting Apply Kernel Variables... Starting Remount Root and Kernel File Systems... Starting Create Static Device Nodes in /dev... [ OK ] Mounted NFSD configuration filesystem. Mounting Arbitrary Executable File Formats File System... [ OK ] Started LVM2 metadata daemon. Starting LVM2 metadata daemon... [ OK ] Started Remount Root and Kernel File Systems. Starting Flush Journal to Persistent Storage... Starting Configure read-only root support... Starting Load/Save Random Seed... Starting udev Coldplug all Devices... [ OK ] Mounted Arbitrary Executable File Formats File System. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Load/Save Random Seed. Starting udev Kernel Device Manager... [ 14.546059] systemd-journald[6472]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Set Up Additional Binary Formats. [ OK ] Started Apply Kernel Variables. [ 14.806130] synth uevent: /devices/vio: failed to send uevent [ 14.806135] vio vio: uevent: failed to send synthetic uevent [ OK ] Started udev Coldplug all Devices. Starting udev Wait for Complete Device Initialization... Starting Device-Mapper Multipath Device Controller... [ OK ] Started Load legacy module configuration. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Configure read-only root support. powernv_rng: Registered powernv hwrng. print_req_error: critical medium error, dev nvme0n1, sector 0 print_req_error: critical medium error, dev nvme0n1, sector 0 Buffer I/O error on dev nvme0n1, logical block 0, async page read [ OK ] Started Device-Mapper Multipath Device Controller. print_req_error: critical medium error, dev nvme0n1, sector 0 sd 5:0:0:0: Power-on or device reset occurred sd 5:0:1:0: Power-on or device reset occurred [ OK ] Found device /dev/hvc0. print_req_error: critical medium error, dev nvme0n1, sector 0 print_req_error: critical medium error, dev nvme0n1, sector 0 print_req_error: critical medium error, dev nvme0n1, sector 0 crypto_register_alg 'aes' = 0 crypto_register_alg 'cbc(aes)' = 0 crypto_register_alg 'ctr(aes)' = 0 crypto_register_alg 'xts(aes)' = 0 [ OK ] Found device /dev/mapper/ca_ltc--garri5-home. [ OK ] Found device /dev/mapper/ca_ltc--garri5-swap. [ OK ] Created slice system-lvm2\x2dpvscan.slice. Starting LVM2 PV scan on device 8:3... Activating swap /dev/mapper/ca_ltc--garri5-swap... [ 16.866315] tg3 0009:07:00.0 net0: renamed from enP9p7s0f0 [ OK ] Found device ST1000NX0313_00LY266_00LY265IBM 2. [ OK ] Started Monitoring of LVM2 mirrors,...ng dmeventd or progress polling. [ OK ] Reached target Local File Systems (Pre). Mounting /boot... Mounting /home... [ 17.258442] Adding 4194240k swap on /dev/mapper/ca_ltc--garri5-swap. Priority:-2 extents:1 across:4194240k [ OK ] Activated swap /dev/mapper/ca_ltc--garri5-swap. [ OK ] Reached target Swap. [ 17.282200] device-mapper: multipath service-time: version 0.3.0 loaded [ 17.298104] XFS (sda2): Mounting V5 Filesystem [ 17.333010] XFS (dm-4): Mounting V5 Filesystem Starting LVM2 PV scan on device 253:9... [ 17.437537] device-mapper: table: 253:6: multipath: error getting device [ 17.437574] device-mapper: ioctl: error adding target to table [ OK ] Started LVM2 PV scan on device 253:9. [ OK ] Started udev Wait for Complete Device Initialization. Starting Activation of DM RAID sets... [ 18.171520] XFS (sda2): Starting recovery (logdev: internal) [ OK ] Started Activation of DM RAID sets. [ OK ] Reached target Encrypted Volumes. [ 18.530217] XFS (dm-4): Starting recovery (logdev: internal) [ 18.582464] XFS (sda2): Ending recovery (logdev: internal) [ OK ] Mounted /boot. [ 18.631444] XFS (dm-4): Ending recovery (logdev: internal) [ OK ] Mounted /home. [ OK ] Reached target Local File Systems. Starting Preprocess NFS configuration... Starting Tell Plymouth To Write Out Runtime Data... Starting Import network configuration from initramfs... [ OK ] Started Preprocess NFS configuration. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started LVM2 PV scan on device 8:3. [ OK ] Started Import network configuration from initramfs. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Mounting RPC Pipe File System... Starting Security Auditing Service... [ OK ] Mounted RPC Pipe File System. [ OK ] Reached target rpc_pipefs.target. Starting NFSv4 ID-name mapping service... [ OK ] Started NFSv4 ID-name mapping service. [ OK ] Started Security Auditing Service. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on Open-iSCSI iscsid Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on Virtual machine lock manager socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Open-iSCSI iscsiuio Socket. [ OK ] Reached target Paths. [ OK ] Listening on Virtual machine log manager socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Ipmievd Daemon... Starting System Logging Service... Starting Authorization Manager... Starting GSSAPI Proxy Daemon... [ OK ] Started D-Bus System Message Bus. Starting D-Bus System Message Bus... Starting Dump dmesg to /var/log/dmesg... [ OK ] Started ABRT Automated Bug Reporting Tool. Starting ABRT Automated Bug Reporting Tool... Starting Resets System Activity Logs... [ OK ] Started libstoragemgmt plug-in server daemon. Starting libstoragemgmt plug-in server daemon... [ OK ] Started irqbalance daemon. Starting irqbalance daemon... Starting Install ABRT coredump hook... Starting Rollback uncommitted netcf...rk config change transactions... Starting Login Service... [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon. Starting Self Monitoring and Reporting Technology (SMART) Daemon... [ OK ] Started Hardware RNG Entropy Gatherer Daemon. Starting Hardware RNG Entropy Gatherer Daemon... [ OK ] Started ABRT kernel log watcher. Starting ABRT kernel log watcher... Starting NTP client/server... [ OK ] Reached target Timers. [ OK ] Started System Logging Service. [FAILED] Failed to start Ipmievd Daemon. See 'systemctl status ipmievd.service' for details. [ OK ] Started GSSAPI Proxy Daemon. [ OK ] Started Dump dmesg to /var/log/dmesg. [ OK ] Started Resets System Activity Logs. [ OK ] Started Rollback uncommitted netcf network config change transactions. Starting Network Manager... [ OK ] Reached target NFS client services. [ OK ] Started Login Service. [ OK ] Started NTP client/server. [ OK ] Started Install ABRT coredump hook. [ OK ] Started Authorization Manager. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. Starting Hostname Service... [ OK ] Started Hostname Service. bnx2x 0008:01:00.0 enP8p1s0f0: using MSI-X IRQs: sp 483 fp[0] 485 ... fp[7] 513 bnx2x 0008:01:00.0 enP8p1s0f0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit bnx2x 0008:01:00.1 enP8p1s0f1: using MSI-X IRQs: sp 452 fp[0] 454 ... fp[7] 426 bnx2x 0008:01:00.1 enP8p1s0f1: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit bnx2x 0008:01:00.2 enP8p1s0f2: using MSI-X IRQs: sp 427 fp[0] 429 ... fp[7] 436 bnx2x 0008:01:00.3 enP8p1s0f3: using MSI-X IRQs: sp 437 fp[0] 439 ... fp[7] 446 tg3 0009:07:00.0 net0: Link is up at 1000 Mbps, full duplex tg3 0009:07:00.0 net0: Flow control is on for TX and on for RX tg3 0009:07:00.0 net0: EEE is disabled [* ] A start job is running for Network ...ger Wait Online (15s / no limit)[ 30.065135] bnx2x 0008:01:00.2 enP8p1s0f2: NIC Link is Up, 1000 Mbps full duplex, Flow control: none [** ] A start job is running for Network ...ger Wait Online (16s / no limit)[ 30.615139] bnx2x 0008:01:00.3 enP8p1s0f3: NIC Link is Up, 1000 Mbps full duplex, Flow control: none [FAILED] Failed to start Network Manager Wait Online. See 'systemctl status NetworkManager-wait-online.service' for details. Starting LSB: Bring up/down networking... [ OK ] Started LSB: Bring up/down networking. [ OK ] Reached target Network. Starting Postfix Mail Transport Agent... Starting OpenSSH server daemon... [ OK ] Reached target Network is Online. Starting NFS Mount Daemon... Starting NFS status monitor for NFSv2/3 locking.... Starting Logout off all iSCSI sessions on shutdown... Starting Dynamic System Tuning Daemon... [ OK ] Started Logout off all iSCSI sessions on shutdown. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting Crash recovery kernel arming... Starting Virtualization daemon... Starting The nginx HTTP and reverse proxy server... Starting Permit User Sessions... Starting Availability of block devices... [ OK ] Started Permit User Sessions. [ OK ] Started Availability of block devices. [ OK ] Started IBM Performance Management for PowerLinux Systems. Starting IBM Performance Management for PowerLinux Systems... [ OK ] Started Command Scheduler. Starting Command Scheduler... [ OK ] Started Job spooling tools. Starting Job spooling tools... Starting Wait for Plymouth Boot Screen to Quit... Starting Terminate Plymouth Boot Screen... [FAILED] Failed to start Crash recovery kernel arming. See 'systemctl status kdump.service' for details. NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 45-second grace period (net f000001f) tun: Universal TUN/TAP device driver, 1.6 virbr0: port 1(virbr0-nic) entered blocking state virbr0: port 1(virbr0-nic) entered disabled state device virbr0-nic entered promiscuous mode CentOS Linux 7 (AltArch) Kernel 4.19.0-rc7-next-20181011-autotest-dirty on an ppc64le garri5 login: