[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1539536883-1928-7-git-send-email-vabhav.sharma@nxp.com>
Date: Sun, 14 Oct 2018 22:38:03 +0530
From: Vabhav Sharma <vabhav.sharma@....com>
To: sudeep.holla@....com, oss@...error.net,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
robh+dt@...nel.org, mark.rutland@....com,
linuxppc-dev@...ts.ozlabs.org,
linux-arm-kernel@...ts.infradead.org, mturquette@...libre.com,
sboyd@...nel.org, rjw@...ysocki.net, viresh.kumar@...aro.org,
linux-clk@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel-owner@...r.kernel.org, catalin.marinas@....com,
will.deacon@....com, gregkh@...uxfoundation.org, arnd@...db.de,
kstewart@...uxfoundation.org, yamada.masahiro@...ionext.com,
leoyang.li@....com, shawnguo@...nel.org
Cc: linux@...linux.org.uk, adrian.hunter@...el.com,
ulf.hansson@...aro.org, V.Sethi@....com, udit.kumar@....com,
pankaj.bansal@....com, Vabhav Sharma <vabhav.sharma@....com>,
Priyanka Jain <priyanka.jain@....com>,
Sriram Dash <sriram.dash@....com>,
Horia Geanta <horia.geanta@....com>,
Ran Wang <ran.wang_1@....com>,
Zhang Ying-22455 <ying.zhang22455@....com>,
Yinbo Zhu <yinbo.zhu@....com>
Subject: [PATCH v5 6/6] arm64: dts: add LX2160ARDB board support
LX2160A reference design board (RDB) is a high-performance
computing, evaluation, and development platform with LX2160A
SoC.
Signed-off-by: Priyanka Jain <priyanka.jain@....com>
Signed-off-by: Sriram Dash <sriram.dash@....com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@....com>
Signed-off-by: Horia Geanta <horia.geanta@....com>
Signed-off-by: Ran Wang <ran.wang_1@....com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@....com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@....com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 119 ++++++++++++++++++++++
2 files changed, 120 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 86e18ad..445b72b 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
new file mode 100644
index 0000000..6481e5f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160ARDB
+//
+// Copyright 2018 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+ model = "NXP Layerscape LX2160ARDB";
+ compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
+
+ aliases {
+ crypto = &crypto;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "MC34717-3.3VSB";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&crypto {
+ status = "okay";
+};
+
+&esdhc0 {
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ status = "okay";
+};
+
+&esdhc1 {
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ power-monitor@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
+ temperature-sensor@4d {
+ compatible = "nxp,sa56004";
+ reg = <0x4d>;
+ vcc-supply = <&sb_3v3>;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ // IRQ10_B
+ interrupts = <0 150 0x4>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
--
2.7.4
Powered by blists - more mailing lists