| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2bef1218-ef43-cdc1-303f-b85863887a6b@ti.com>
Date: Mon, 15 Oct 2018 13:53:10 +0530
From: Sekhar Nori <nsekhar@...com>
To: Vignesh R <vigneshr@...com>, Mark Brown <broonie@...nel.org>
CC: <linux-spi@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 3/3] spi: omap2-mcspi: Add slave mode support
On Monday 15 October 2018 12:08 PM, Vignesh R wrote:
> Add support to use McSPI controller as SPI slave. In slave mode, DMA TX
> completion does not mean entire data has been shifted out as data might
> still be stuck in FIFO waiting for master to clock the bus. Therefore,
> add an IRQ handler for slave mode to know when entire data in FIFO has
> been shifted out.
>
> Signed-off-by: Vignesh R <vigneshr@...com>
> ---
> drivers/spi/spi-omap2-mcspi.c | 138 ++++++++++++++++++++++++++++++----
> 1 file changed, 122 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
> index 88469bb22235..f024c3fc3679 100644
> --- a/drivers/spi/spi-omap2-mcspi.c
> +++ b/drivers/spi/spi-omap2-mcspi.c
> @@ -127,6 +127,7 @@ struct omap2_mcspi_regs {
> };
>
> struct omap2_mcspi {
> + struct completion txdone;
> struct spi_master *master;
> /* Virtual base address of the controller */
> void __iomem *base;
> @@ -136,6 +137,7 @@ struct omap2_mcspi {
> struct device *dev;
> struct omap2_mcspi_regs ctx;
> int fifo_depth;
> + bool slave_aborted;
> unsigned int pin_dir:1;
> };
>
> @@ -275,19 +277,23 @@ static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
> }
> }
>
> -static void omap2_mcspi_set_master_mode(struct spi_master *master)
> +static void omap2_mcspi_set_mode(struct spi_master *master)
> {
> struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
> struct omap2_mcspi_regs *ctx = &mcspi->ctx;
> u32 l;
>
> /*
> - * Setup when switching from (reset default) slave mode
> - * to single-channel master mode
> + * Choose master or slave mode
> */
> l = mcspi_read_reg(master, OMAP2_MCSPI_MODULCTRL);
> - l &= ~(OMAP2_MCSPI_MODULCTRL_STEST | OMAP2_MCSPI_MODULCTRL_MS);
> - l |= OMAP2_MCSPI_MODULCTRL_SINGLE;
> + l &= ~(OMAP2_MCSPI_MODULCTRL_STEST);
> + if (spi_controller_is_slave(master)) {
> + l |= (OMAP2_MCSPI_MODULCTRL_MS);
> + } else {
> + l &= ~(OMAP2_MCSPI_MODULCTRL_MS);
> + l |= OMAP2_MCSPI_MODULCTRL_SINGLE;
> + }
> mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, l);
>
> ctx->modulctrl = l;
> @@ -356,6 +362,20 @@ static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
> return readl_poll_timeout(reg, val, val & bit, 1, MSEC_PER_SEC);
> }
>
> +static int mcspi_wait_for_completion(struct omap2_mcspi *mcspi,
> + struct completion *x)
> +{
> + if (spi_controller_is_slave(mcspi->master)) {
> + if (wait_for_completion_interruptible(x) ||
> + mcspi->slave_aborted)
> + return -EINTR;
> + } else {
> + wait_for_completion(x);
> + }
> +
> + return 0;
> +}
> +
> static void omap2_mcspi_rx_callback(void *data)
> {
> struct spi_device *spi = data;
> @@ -505,7 +525,12 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
> dma_async_issue_pending(mcspi_dma->dma_rx);
> omap2_mcspi_set_dma_req(spi, 1, 1);
>
> - wait_for_completion(&mcspi_dma->dma_rx_completion);
> + ret = mcspi_wait_for_completion(mcspi, &mcspi_dma->dma_rx_completion);
> + if (ret || mcspi->slave_aborted) {
> + dmaengine_terminate_sync(mcspi_dma->dma_rx);
> + omap2_mcspi_set_dma_req(spi, 1, 0);
> + return 0;
> + }
>
> for (x = 0; x < nb_sizes; x++)
> kfree(sg_out[x]);
> @@ -604,14 +629,37 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
> rx = xfer->rx_buf;
> tx = xfer->tx_buf;
>
> - if (tx != NULL)
> + mcspi->slave_aborted = false;
> + reinit_completion(&mcspi_dma->dma_tx_completion);
> + reinit_completion(&mcspi_dma->dma_rx_completion);
> + reinit_completion(&mcspi->txdone);
> + if (tx) {
> + /* Enable EOW IRQ to know end of tx in slave mode */
> + if (spi_controller_is_slave(spi->master))
> + mcspi_write_reg(spi->master,
> + OMAP2_MCSPI_IRQENABLE,
> + OMAP2_MCSPI_IRQSTATUS_EOW);
> omap2_mcspi_tx_dma(spi, xfer, cfg);
> + }
>
> if (rx != NULL)
> count = omap2_mcspi_rx_dma(spi, xfer, cfg, es);
>
> if (tx != NULL) {
> - wait_for_completion(&mcspi_dma->dma_tx_completion);
> + int ret;
> +
> + ret = mcspi_wait_for_completion(mcspi, &mcspi_dma->dma_tx_completion);
> + if (ret || mcspi->slave_aborted) {
> + dmaengine_terminate_sync(mcspi_dma->dma_tx);
> + omap2_mcspi_set_dma_req(spi, 0, 0);
> + return 0;
> + }
> +
> + if (spi_controller_is_slave(mcspi->master)) {
> + ret = mcspi_wait_for_completion(mcspi, &mcspi->txdone);
> + if (ret || mcspi->slave_aborted)
> + return 0;
> + }
>
> if (mcspi->fifo_depth > 0) {
> irqstat_reg = mcspi->base + OMAP2_MCSPI_IRQSTATUS;
> @@ -1068,6 +1116,36 @@ static void omap2_mcspi_cleanup(struct spi_device *spi)
> gpio_free(spi->cs_gpio);
> }
>
> +static irqreturn_t omap2_mcspi_irq_handler(int irq, void *data)
> +{
> + struct omap2_mcspi *mcspi = data;
> + u32 irqstat;
> +
> + irqstat = mcspi_read_reg(mcspi->master, OMAP2_MCSPI_IRQSTATUS);
> + if (!irqstat)
> + return IRQ_NONE;
> +
> + /* Disable IRQ and wakeup slave xfer task */
> + mcspi_write_reg(mcspi->master, OMAP2_MCSPI_IRQENABLE, 0);
> + if (irqstat & OMAP2_MCSPI_IRQSTATUS_EOW)
> + complete(&mcspi->txdone);
> +
> + return IRQ_HANDLED;
You need to have the:
pm_runtime_get_sync();
/* access registers */
pm_runtime_mark_last_busy();
pm_runtime_put_autosuspend();
sequence here. I think thats also missing from the dma callbacks.
Probably working by chance today.
Thanks,
Sekhar
Powered by blists - more mailing lists