| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1539613276.4199.9.camel@synopsys.com>
Date: Mon, 15 Oct 2018 14:21:18 +0000
From: Eugeniy Paltsev <eugeniy.paltsev@...opsys.com>
To: "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-snps-arc@...ts.infradead.org"
<linux-snps-arc@...ts.infradead.org>,
Alexey Brodkin <alexey.brodkin@...opsys.com>,
"boris.brezillon@...tlin.com" <boris.brezillon@...tlin.com>,
Vineet Gupta <vineet.gupta1@...opsys.com>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
"computersforpeace@...il.com" <computersforpeace@...il.com>,
"marek.vasut@...il.com" <marek.vasut@...il.com>,
"richard@....at" <richard@....at>
Subject: Re: [PATCH v2 1/2] mtd: spi-nor: Add support of sst26wf* flash ICs
protection ops
Hi!
Maybe you have any comments or remarks about this patch?
And if you don't could you please apply it. Thanks!
On Mon, 2018-09-10 at 14:46 +0300, Eugeniy Paltsev wrote:
> sst26wf flash series block protection implementation differs
> from other SST series, so add specific implementation
> flash_lock/flash_unlock/flash_is_locked functions for sst26wf
> flash ICs.
>
> NOTE:
> this patch is basically following mine u-boot commit port:
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=3d4fed87a5fa3ffedf64ff2811cd95c5ac4503ac
>
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
> ---
> Changes v1->v2:
> * Check return value of {read | write}_reg callbacks.
>
> drivers/mtd/spi-nor/spi-nor.c | 177 ++++++++++++++++++++++++++++++++++++++++++
> include/linux/mtd/spi-nor.h | 4 +
> 2 files changed, 181 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index d9c368c44194..d0e7c85b6002 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -598,6 +598,177 @@ static int write_sr_and_check(struct spi_nor *nor, u8 status_new, u8 mask)
> return ((ret & mask) != (status_new & mask)) ? -EIO : 0;
> }
>
> +/*
> + * sst26wf016/sst26wf032/sst26wf064 have next block protection:
> + * 4x - 8 KByte blocks - read & write protection bits - upper addresses
> + * 1x - 32 KByte blocks - write protection bits
> + * rest - 64 KByte blocks - write protection bits
> + * 1x - 32 KByte blocks - write protection bits
> + * 4x - 8 KByte blocks - read & write protection bits - lower addresses
> + *
> + * We'll support only per 64k lock/unlock so lower and upper 64 KByte region
> + * will be treated as single block.
> + */
> +#define SST26_BPR_8K_NUM 4
> +#define SST26_MAX_BPR_REG_LEN (18 + 1)
> +#define SST26_BOUND_REG_SIZE ((32 + SST26_BPR_8K_NUM * 8) * SZ_1K)
> +
> +enum lock_ctl {
> + SST26_CTL_LOCK,
> + SST26_CTL_UNLOCK,
> + SST26_CTL_CHECK
> +};
> +
> +static bool sst26_process_bpr(u32 bpr_size, u8 *cmd, u32 bit, enum lock_ctl ctl)
> +{
> + switch (ctl) {
> + case SST26_CTL_LOCK:
> + cmd[bpr_size - (bit / 8) - 1] |= BIT(bit % 8);
> + break;
> + case SST26_CTL_UNLOCK:
> + cmd[bpr_size - (bit / 8) - 1] &= ~BIT(bit % 8);
> + break;
> + case SST26_CTL_CHECK:
> + return !!(cmd[bpr_size - (bit / 8) - 1] & BIT(bit % 8));
> + }
> +
> + return false;
> +}
> +
> +/*
> + * Lock, unlock or check lock status of the flash region of the flash (depending
> + * on the lock_ctl value)
> + */
> +static int sst26_lock_ctl(struct spi_nor *nor, loff_t ofs, uint64_t len, enum lock_ctl ctl)
> +{
> + struct mtd_info *mtd = &nor->mtd;
> + u32 i, bpr_ptr, rptr_64k, lptr_64k, bpr_size;
> + bool lower_64k = false, upper_64k = false;
> + u8 bpr_buff[SST26_MAX_BPR_REG_LEN] = {};
> + int ret;
> +
> + /* Check length and offset for 64k alignment */
> + if ((ofs & (SZ_64K - 1)) || (len & (SZ_64K - 1))) {
> + dev_err(nor->dev, "length or offset is not 64KiB allighned\n");
> + return -EINVAL;
> + }
> +
> + if (ofs + len > mtd->size) {
> + dev_err(nor->dev, "range is more than device size: %#llx + %#llx > %#llx\n",
> + ofs, len, mtd->size);
> + return -EINVAL;
> + }
> +
> + /* SST26 family has only 16 Mbit, 32 Mbit and 64 Mbit IC */
> + if (mtd->size != SZ_2M &&
> + mtd->size != SZ_4M &&
> + mtd->size != SZ_8M)
> + return -EINVAL;
> +
> + bpr_size = 2 + (mtd->size / SZ_64K / 8);
> +
> + ret = nor->read_reg(nor, SPINOR_OP_READ_BPR, bpr_buff, bpr_size);
> + if (ret < 0) {
> + dev_err(nor->dev, "fail to read block-protection register\n");
> + return ret;
> + }
> +
> + rptr_64k = min_t(u32, ofs + len, mtd->size - SST26_BOUND_REG_SIZE);
> + lptr_64k = max_t(u32, ofs, SST26_BOUND_REG_SIZE);
> +
> + upper_64k = ((ofs + len) > (mtd->size - SST26_BOUND_REG_SIZE));
> + lower_64k = (ofs < SST26_BOUND_REG_SIZE);
> +
> + /* Lower bits in block-protection register are about 64k region */
> + bpr_ptr = lptr_64k / SZ_64K - 1;
> +
> + /* Process 64K blocks region */
> + while (lptr_64k < rptr_64k) {
> + if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
> + return EACCES;
> +
> + bpr_ptr++;
> + lptr_64k += SZ_64K;
> + }
> +
> + /* 32K and 8K region bits in BPR are after 64k region bits */
> + bpr_ptr = (mtd->size - 2 * SST26_BOUND_REG_SIZE) / SZ_64K;
> +
> + /* Process lower 32K block region */
> + if (lower_64k)
> + if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
> + return EACCES;
> +
> + bpr_ptr++;
> +
> + /* Process upper 32K block region */
> + if (upper_64k)
> + if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
> + return EACCES;
> +
> + bpr_ptr++;
> +
> + /* Process lower 8K block regions */
> + for (i = 0; i < SST26_BPR_8K_NUM; i++) {
> + if (lower_64k)
> + if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
> + return EACCES;
> +
> + /* In 8K area BPR has both read and write protection bits */
> + bpr_ptr += 2;
> + }
> +
> + /* Process upper 8K block regions */
> + for (i = 0; i < SST26_BPR_8K_NUM; i++) {
> + if (upper_64k)
> + if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
> + return EACCES;
> +
> + /* In 8K area BPR has both read and write protection bits */
> + bpr_ptr += 2;
> + }
> +
> + /* If we check region status we don't need to write BPR back */
> + if (ctl == SST26_CTL_CHECK)
> + return 0;
> +
> + ret = nor->write_reg(nor, SPINOR_OP_WRITE_BPR, bpr_buff, bpr_size);
> + if (ret < 0) {
> + dev_err(nor->dev, "fail to write block-protection register\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int sst26_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
> +{
> + return sst26_lock_ctl(nor, ofs, len, SST26_CTL_UNLOCK);
> +}
> +
> +static int sst26_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
> +{
> + return sst26_lock_ctl(nor, ofs, len, SST26_CTL_LOCK);
> +}
> +
> +/*
> + * Returns EACCES (positive value) if region is locked, 0 if region is unlocked,
> + * and negative on errors.
> + */
> +static int sst26_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
> +{
> + /*
> + * is_locked function is used for check before reading or erasing flash
> + * region, so offset and length might be not 64k allighned, so adjust
> + * them to be 64k allighned as sst26_lock_ctl works only with 64k
> + * allighned regions.
> + */
> + ofs -= ofs & (SZ_64K - 1);
> + len = len & (SZ_64K - 1) ? (len & ~(SZ_64K - 1)) + SZ_64K : len;
> +
> + return sst26_lock_ctl(nor, ofs, len, SST26_CTL_CHECK);
> +}
> +
> static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs,
> uint64_t *len)
> {
> @@ -2872,6 +3043,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> nor->flash_is_locked = stm_is_locked;
> }
>
> + if (JEDEC_MFR(info) == SNOR_MFR_SST && info->id[1] == 0x26) {
> + nor->flash_lock = sst26_lock;
> + nor->flash_unlock = sst26_unlock;
> + nor->flash_is_locked = sst26_is_locked;
> + }
> +
> if (nor->flash_lock && nor->flash_unlock && nor->flash_is_locked) {
> mtd->_lock = spi_nor_lock;
> mtd->_unlock = spi_nor_unlock;
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index e60da0d34cc1..246014a73f83 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -93,6 +93,10 @@
> #define SPINOR_OP_WRDI 0x04 /* Write disable */
> #define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */
>
> +/* Used for SST26* flashes only. */
> +#define SPINOR_OP_READ_BPR 0x72 /* Read block protection register */
> +#define SPINOR_OP_WRITE_BPR 0x42 /* Write block protection register */
> +
> /* Used for S3AN flashes only */
> #define SPINOR_OP_XSE 0x50 /* Sector erase */
> #define SPINOR_OP_XPP 0x82 /* Page program */
--
Eugeniy Paltsev
Powered by blists - more mailing lists