lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <5f3b530b-1869-2749-ef05-60fb272d56f8@synopsys.com>
Date:   Mon, 15 Oct 2018 17:21:03 +0100
From:   Luis Oliveira <luis.oliveira@...opsys.com>
To:     Rob Herring <robh@...nel.org>,
        Luis Oliveira <Luis.Oliveira@...opsys.com>
CC:     <linux-media@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <Joao.Pinto@...opsys.com>, <festevam@...il.com>,
        Mark Rutland <mark.rutland@....com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        "Hans Verkuil" <hans.verkuil@...co.com>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>,
        Arnd Bergmann <arnd@...db.de>,
        Jacob Chen <jacob-chen@...wrt.com>,
        Neil Armstrong <narmstrong@...libre.com>,
        Keiichi Watanabe <keiichiw@...omium.org>,
        Kate Stewart <kstewart@...uxfoundation.org>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Todor Tomov <todor.tomov@...aro.org>,
        <devicetree@...r.kernel.org>
Subject: Re: [V2, 2/5] Documentation: dt-bindings: Document the Synopsys MIPI
 DPHY Rx bindings

Hi Rob,

On 12-Oct-18 17:45, Rob Herring wrote:
> On Thu, Sep 20, 2018 at 01:16:40PM +0200, Luis Oliveira wrote:
>> Add device-tree bindings documentation for SNPS DesignWare MIPI D-PHY in
>> RX mode.
> 
> "dt-bindings: phy: ..." for the subject.
> 
Yes, you are right.

>>
>> Signed-off-by: Luis Oliveira <lolivei@...opsys.com>
>> ---
>> Changelog
>> v2:
>> - no changes
>>
>>  .../devicetree/bindings/phy/snps,dphy-rx.txt       | 36 ++++++++++++++++++++++
>>  1 file changed, 36 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
>>
>> diff --git a/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
>> new file mode 100644
>> index 0000000..9079f4a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
>> @@ -0,0 +1,36 @@
>> +Synopsys DesignWare MIPI Rx D-PHY block details
>> +
>> +Description
>> +-----------
>> +
>> +The Synopsys MIPI D-PHY controller supports MIPI-DPHY in receiver mode.
>> +Please refer to phy-bindings.txt for more information.
>> +
>> +Required properties:
>> +- compatible		: Shall be "snps,dphy-rx".
>> +- #phy-cells		: Must be 1.
>> +- snps,dphy-frequency	: Output frequency of the D-PHY.
>> +- snps,dphy-te-len	: Size of the communication interface (8 bits->8 or 12bits->12).
>> +- reg			: Physical base address and size of the device memory mapped
>> +		 	  registers;
>> +
>> +Optional properties:
>> +- snps,compat-mode	: Compatibility mode control
> 
> type? values?
> 

I will remove this in V3.

>> +
>> +The per-board settings:
>> +- gpios 		: Synopsys testchip used as reference uses this to change setup
>> +		  	  configurations.
> 
> Preferred to be named (e.g. foo-gpios). How many? What are their 
> functions?
> 

Ok, thanks for reviewing this.

>> +
>> +Example:
>> +
>> +	mipi_dphy_rx1: dphy@...0 {
>> +		compatible = "snps,dphy-rx";
>> +		#phy-cells = <1>;
>> +		snps,dphy-frequency = <300000>;
>> +		snps,dphy-te-len = <12>;
>> +		snps,compat-mode = <1>;
>> +		reg = < 0x03040 0x20
>> +			0x08000 0x100
>> +			0x09000 0x100>;
>> +	};
>> +
>> -- 
>> 2.9.3
>>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ