linux-kernel - [PATCH 4.14 016/109] net: systemport: Fix wake-up interrupt race during resume

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181016170525.876992537@linuxfoundation.org>
Date:   Tue, 16 Oct 2018 19:04:44 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>
Subject: [PATCH 4.14 016/109] net: systemport: Fix wake-up interrupt race during resume

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <f.fainelli@...il.com>

[ Upstream commit 45ec318578c0c22a11f5b9927d064418e1ab1905 ]

The AON_PM_L2 is normally used to trigger and identify the source of a
wake-up event. Since the RX_SYS clock is no longer turned off, we also
have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and
that interrupt remains active up until the magic packet detector is
disabled which happens much later during the driver resumption.

The race happens if we have a CPU that is entering the SYSTEMPORT
INTRL2_0 handler during resume, and another CPU has managed to clear the
wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we
have the first CPU stuck in the interrupt handler with an interrupt
cause that has been cleared under its feet, and so we keep returning
IRQ_NONE and we never make any progress.

This was not a problem before because we would always turn off the
RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned
off as well, thus not latching the interrupt.

The fix is to make sure we do not enable either the MPD or
BRCM_TAG_MATCH interrupts since those are redundant with what the
AON_PM_L2 interrupt controller already processes and they would cause
such a race to occur.

Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER")
Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1001,14 +1001,22 @@ static void bcm_sysport_resume_from_wol(
 {
 	u32 reg;

-	/* Stop monitoring MPD interrupt */
-	intrl2_0_mask_set(priv, INTRL2_0_MPD);
-
 	/* Clear the MagicPacket detection logic */
 	reg = umac_readl(priv, UMAC_MPD_CTRL);
 	reg &= ~MPD_EN;
 	umac_writel(priv, reg, UMAC_MPD_CTRL);

+	reg = intrl2_0_readl(priv, INTRL2_CPU_STATUS);
+	if (reg & INTRL2_0_MPD)
+		netdev_info(priv->netdev, "Wake-on-LAN (MPD) interrupt!\n");
+
+	if (reg & INTRL2_0_BRCM_MATCH_TAG) {
+		reg = rxchk_readl(priv, RXCHK_BRCM_TAG_MATCH_STATUS) &
+				  RXCHK_BRCM_TAG_MATCH_MASK;
+		netdev_info(priv->netdev,
+			    "Wake-on-LAN (filters 0x%02x) interrupt!\n", reg);
+	}
+
 	netif_dbg(priv, wol, priv->netdev, "resumed from WOL\n");
 }

@@ -1043,11 +1051,6 @@ static irqreturn_t bcm_sysport_rx_isr(in
 	if (priv->irq0_stat & INTRL2_0_TX_RING_FULL)
 		bcm_sysport_tx_reclaim_all(priv);

-	if (priv->irq0_stat & INTRL2_0_MPD) {
-		netdev_info(priv->netdev, "Wake-on-LAN interrupt!\n");
-		bcm_sysport_resume_from_wol(priv);
-	}
-
 	if (!priv->is_lite)
 		goto out;

@@ -2248,9 +2251,6 @@ static int bcm_sysport_suspend_to_wol(st
 	/* UniMAC receive needs to be turned on */
 	umac_enable_set(priv, CMD_RX_EN, 1);

-	/* Enable the interrupt wake-up source */
-	intrl2_0_mask_clear(priv, INTRL2_0_MPD);
-
 	netif_dbg(priv, wol, ndev, "entered WOL mode\n");

 	return 0;