| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181016142200.19741-18-alexandre.belloni@bootlin.com>
Date: Tue, 16 Oct 2018 16:21:55 +0200
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Stephen Boyd <sboyd@...nel.org>
Cc: Nicolas Ferre <nicolas.ferre@...rochip.com>,
Michael Turquette <mturquette@...libre.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Alexandre Belloni <alexandre.belloni@...tlin.com>
Subject: [PATCH v2 17/22] ARM: dts: at91: sama5d2: switch to new binding
Switch sama5d2 boards to the new PMC clock bindings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
---
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 12 +-
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 +-
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 +-
arch/arm/boot/dts/sama5d2.dtsi | 642 ++------------------
4 files changed, 64 insertions(+), 596 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index e86e0c00eb6b..2b0ddabe4178 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -165,7 +165,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_i2c>;
atmel,fifo-size = <16>;
@@ -211,7 +211,7 @@
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
@@ -223,7 +223,7 @@
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "spi_clk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
@@ -240,7 +240,7 @@
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
@@ -252,7 +252,7 @@
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "spi_clk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
@@ -268,7 +268,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index b10dccd0958f..835ff9b715c7 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -196,7 +196,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
atmel,fifo-size = <16>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index fcc85d70f36e..7546116b3b64 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -258,7 +258,7 @@
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
@@ -307,7 +307,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5c48e9..6c70a928defb 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -81,7 +81,7 @@
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0x740000 0x1000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "apb_pclk";
port {
@@ -96,7 +96,7 @@
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x73C000 0x1000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "apb_pclk";
port {
@@ -148,7 +148,7 @@
reg = <0x00300000 0x100000
0xfc02c000 0x400>;
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&udphs_clk>, <&utmi>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk";
status = "disabled";
@@ -275,7 +275,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00400000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -284,7 +284,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00500000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
@@ -308,7 +308,7 @@
0x1 0x0 0x60000000 0x10000000
0x2 0x0 0x70000000 0x10000000
0x3 0x0 0x80000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
@@ -356,7 +356,7 @@
/* NFC SRAM banks */
0x00100000 0x00100000
>;
- clocks = <&hsmc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
atmel,write-by-sram;
};
};
@@ -365,7 +365,7 @@
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
clock-names = "hclock", "multclk", "baseclk";
status = "disabled";
};
@@ -374,7 +374,7 @@
compatible = "atmel,sama5d2-sdhci";
reg = <0xb0000000 0x300>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
clock-names = "hclock", "multclk", "baseclk";
status = "disabled";
};
@@ -394,7 +394,7 @@
compatible = "atmel,sama5d2-hlcdc";
reg = <0xf0000000 0x2000>;
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
@@ -420,7 +420,7 @@
compatible = "atmel,sama5d2-isc";
reg = <0xf0008000 0x4000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>;
clock-names = "hclock", "iscck", "gck";
#clock-cells = <0>;
clock-output-names = "isc-mck";
@@ -430,7 +430,7 @@
ramc0: ramc@...0c000 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xf000c000 0x200>;
- clocks = <&ddrck>, <&mpddr_clk>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "ddrck", "mpddr";
};
@@ -439,7 +439,7 @@
reg = <0xf0010000 0x1000>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "dma_clk";
};
@@ -449,7 +449,7 @@
reg = <0xf0004000 0x1000>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
- clocks = <&dma1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "dma_clk";
};
@@ -457,541 +457,9 @@
compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCRCS>;
- clock-frequency = <12000000>;
- clock-accuracy = <100000000>;
- };
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCSELS>;
- clocks = <&main_rc_osc &main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,sama5d3-clk-pll";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <12000000 12000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- audio_pll_frac: audiopll_fracck {
- compatible = "atmel,sama5d2-clk-audio-pll-frac";
- #clock-cells = <0>;
- clocks = <&main>;
- };
-
- audio_pll_pad: audiopll_padck {
- compatible = "atmel,sama5d2-clk-audio-pll-pad";
- #clock-cells = <0>;
- clocks = <&audio_pll_frac>;
- };
-
- audio_pll_pmc: audiopll_pmcck {
- compatible = "atmel,sama5d2-clk-audio-pll-pmc";
- #clock-cells = <0>;
- clocks = <&audio_pll_frac>;
- };
-
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKU>;
- clocks = <&main>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <124000000 166000000>;
- atmel,clk-divisors = <1 2 4 3>;
- };
-
- h32ck: h32mxck {
- #clock-cells = <0>;
- compatible = "atmel,sama5d4-clk-h32mx";
- clocks = <&mck>;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9x5-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
-
- prog2: prog2 {
- #clock-cells = <0>;
- reg = <2>;
- interrupts = <AT91_PMC_PCKRDY(2)>;
- };
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- lcdck: lcdck {
- #clock-cells = <0>;
- reg = <3>;
- clocks = <&mck>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
-
- pck2: pck2 {
- #clock-cells = <0>;
- reg = <10>;
- clocks = <&prog2>;
- };
-
- iscck: iscck {
- #clock-cells = <0>;
- reg = <18>;
- clocks = <&mck>;
- };
- };
-
- periph32ck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&h32ck>;
-
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <5>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tdes_clk: tdes_clk {
- #clock-cells = <0>;
- reg = <11>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- matrix1_clk: matrix1_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- hsmc_clk: hsmc_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <18>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx0_clk: flx0_clk {
- #clock-cells = <0>;
- reg = <19>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx1_clk: flx1_clk {
- #clock-cells = <0>;
- reg = <20>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx2_clk: flx2_clk {
- #clock-cells = <0>;
- reg = <21>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx3_clk: flx3_clk {
- #clock-cells = <0>;
- reg = <22>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx4_clk: flx4_clk {
- #clock-cells = <0>;
- reg = <23>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <24>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart1_clk: uart1_clk {
- #clock-cells = <0>;
- reg = <25>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart2_clk: uart2_clk {
- #clock-cells = <0>;
- reg = <26>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart3_clk: uart3_clk {
- #clock-cells = <0>;
- reg = <27>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart4_clk: uart4_clk {
- #clock-cells = <0>;
- reg = <28>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- twi0_clk: twi0_clk {
- reg = <29>;
- #clock-cells = <0>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <30>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <33>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <34>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tcb0_clk: tcb0_clk {
- #clock-cells = <0>;
- reg = <35>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tcb1_clk: tcb1_clk {
- #clock-cells = <0>;
- reg = <36>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <38>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <40>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <41>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <42>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <43>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- ssc1_clk: ssc1_clk {
- #clock-cells = <0>;
- reg = <44>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- trng_clk: trng_clk {
- #clock-cells = <0>;
- reg = <47>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pdmic_clk: pdmic_clk {
- #clock-cells = <0>;
- reg = <48>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- securam_clk: securam_clk {
- #clock-cells = <0>;
- reg = <51>;
- };
-
- i2s0_clk: i2s0_clk {
- #clock-cells = <0>;
- reg = <54>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- i2s1_clk: i2s1_clk {
- #clock-cells = <0>;
- reg = <55>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- can0_clk: can0_clk {
- #clock-cells = <0>;
- reg = <56>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- can1_clk: can1_clk {
- #clock-cells = <0>;
- reg = <57>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- classd_clk: classd_clk {
- #clock-cells = <0>;
- reg = <59>;
- atmel,clk-output-range = <0 83000000>;
- };
- };
-
- periph64ck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- dma1_clk: dma1_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- aes_clk: aes_clk {
- #clock-cells = <0>;
- reg = <9>;
- };
-
- aesb_clk: aesb_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- sha_clk: sha_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- mpddr_clk: mpddr_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- matrix0_clk: matrix0_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- sdmmc0_hclk: sdmmc0_hclk {
- #clock-cells = <0>;
- reg = <31>;
- };
-
- sdmmc1_hclk: sdmmc1_hclk {
- #clock-cells = <0>;
- reg = <32>;
- };
-
- lcdc_clk: lcdc_clk {
- #clock-cells = <0>;
- reg = <45>;
- };
-
- isc_clk: isc_clk {
- #clock-cells = <0>;
- reg = <46>;
- };
-
- qspi0_clk: qspi0_clk {
- #clock-cells = <0>;
- reg = <52>;
- };
-
- qspi1_clk: qspi1_clk {
- #clock-cells = <0>;
- reg = <53>;
- };
- };
-
- gck {
- compatible = "atmel,sama5d2-clk-generated";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
-
- sdmmc0_gclk: sdmmc0_gclk {
- #clock-cells = <0>;
- reg = <31>;
- };
-
- sdmmc1_gclk: sdmmc1_gclk {
- #clock-cells = <0>;
- reg = <32>;
- };
-
- tcb0_gclk: tcb0_gclk {
- #clock-cells = <0>;
- reg = <35>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tcb1_gclk: tcb1_gclk {
- #clock-cells = <0>;
- reg = <36>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pwm_gclk: pwm_gclk {
- #clock-cells = <0>;
- reg = <38>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- isc_gclk: isc_gclk {
- #clock-cells = <0>;
- reg = <46>;
- };
-
- pdmic_gclk: pdmic_gclk {
- #clock-cells = <0>;
- reg = <48>;
- };
-
- i2s0_gclk: i2s0_gclk {
- #clock-cells = <0>;
- reg = <54>;
- };
-
- i2s1_gclk: i2s1_gclk {
- #clock-cells = <0>;
- reg = <55>;
- };
-
- can0_gclk: can0_gclk {
- #clock-cells = <0>;
- reg = <56>;
- atmel,clk-output-range = <0 80000000>;
- };
-
- can1_gclk: can1_gclk {
- #clock-cells = <0>;
- reg = <57>;
- atmel,clk-output-range = <0 80000000>;
- };
-
- classd_gclk: classd_gclk {
- #clock-cells = <0>;
- reg = <59>;
- atmel,clk-output-range = <0 100000000>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
qspi0: spi@...20000 {
@@ -999,7 +467,7 @@
reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
reg-names = "qspi_base", "qspi_mmap";
interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&qspi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1010,7 +478,7 @@
reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
reg-names = "qspi_base", "qspi_mmap";
interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&qspi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1024,7 +492,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(30))>;
dma-names = "tx";
- clocks = <&sha_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "sha_clk";
status = "okay";
};
@@ -1040,7 +508,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(27))>;
dma-names = "tx", "rx";
- clocks = <&aes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "aes_clk";
status = "okay";
};
@@ -1056,7 +524,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(7))>;
dma-names = "tx", "rx";
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
clock-names = "spi_clk";
atmel,fifo-size = <16>;
#address-cells = <1>;
@@ -1075,7 +543,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(22))>;
dma-names = "tx", "rx";
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
clock-names = "pclk";
status = "disabled";
};
@@ -1088,7 +556,7 @@
67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&macb0_clk>, <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -1099,7 +567,7 @@
#size-cells = <0>;
reg = <0xf800c000 0x100>;
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -1109,7 +577,7 @@
#size-cells = <0>;
reg = <0xf8010000 0x100>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb1_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -1117,7 +585,7 @@
compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
reg = <0xf8014000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
- clocks = <&hsmc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1137,7 +605,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(50))>;
dma-names = "rx";
- clocks = <&pdmic_clk>, <&pdmic_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>;
clock-names = "pclk", "gclk";
status = "disabled";
};
@@ -1153,7 +621,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(36))>;
dma-names = "tx", "rx";
- clocks = <&uart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "usart";
status = "disabled";
};
@@ -1169,7 +637,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(38))>;
dma-names = "tx", "rx";
- clocks = <&uart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
clock-names = "usart";
status = "disabled";
};
@@ -1185,7 +653,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(40))>;
dma-names = "tx", "rx";
- clocks = <&uart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
clock-names = "usart";
status = "disabled";
};
@@ -1203,7 +671,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
atmel,fifo-size = <16>;
status = "disabled";
};
@@ -1213,7 +681,7 @@
reg = <0xf802c000 0x4000>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
#pwm-cells = <3>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
};
sfr: sfr@...30000 {
@@ -1224,7 +692,7 @@
flx0: flexcom@...34000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xf8034000 0x200>;
- clocks = <&flx0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf8034000 0x800>;
@@ -1234,7 +702,7 @@
flx1: flexcom@...38000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xf8038000 0x200>;
- clocks = <&flx1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf8038000 0x800>;
@@ -1244,7 +712,7 @@
securam: sram@...44000 {
compatible = "atmel,sama5d2-securam", "mmio-sram";
reg = <0xf8044000 0x1420>;
- clocks = <&securam_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xf8044000 0x1420>;
@@ -1269,7 +737,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xf8048030 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&h32ck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
};
watchdog@...48040 {
@@ -1302,10 +770,10 @@
interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
<64 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-names = "int0", "int1";
- clocks = <&can0_clk>, <&can0_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>;
clock-names = "hclk", "cclk";
- assigned-clocks = <&can0_gclk>;
- assigned-clock-parents = <&utmi>;
+ assigned-clocks = <&pmc PMC_TYPE_GCK 56>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
assigned-clock-rates = <40000000>;
bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
status = "disabled";
@@ -1322,7 +790,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(9))>;
dma-names = "tx", "rx";
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
clock-names = "spi_clk";
atmel,fifo-size = <16>;
#address-cells = <1>;
@@ -1341,7 +809,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(42))>;
dma-names = "tx", "rx";
- clocks = <&uart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
clock-names = "usart";
status = "disabled";
};
@@ -1357,7 +825,7 @@
AT91_XDMAC_DT_PERID(44))>;
dma-names = "tx", "rx";
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&uart4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
clock-names = "usart";
status = "disabled";
};
@@ -1365,7 +833,7 @@
flx2: flexcom@...10000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc010000 0x200>;
- clocks = <&flx2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc010000 0x800>;
@@ -1375,7 +843,7 @@
flx3: flexcom@...14000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc014000 0x200>;
- clocks = <&flx3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc014000 0x800>;
@@ -1385,7 +853,7 @@
flx4: flexcom@...18000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc018000 0x200>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc018000 0x800>;
@@ -1396,7 +864,7 @@
compatible = "atmel,at91sam9g45-trng";
reg = <0xfc01c000 0x100>;
interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&trng_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
};
aic: interrupt-controller@...20000 {
@@ -1420,7 +888,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
atmel,fifo-size = <16>;
status = "disabled";
};
@@ -1429,7 +897,7 @@
compatible = "atmel,sama5d2-adc";
reg = <0xfc030000 0x100>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&adc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
clock-names = "adc_clk";
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
dma-names = "rx";
@@ -1451,7 +919,7 @@
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
};
secumod@...40000 {
@@ -1470,7 +938,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(29))>;
dma-names = "tx", "rx";
- clocks = <&tdes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
clock-names = "tdes_clk";
status = "okay";
};
@@ -1483,7 +951,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(47))>;
dma-names = "tx";
- clocks = <&classd_clk>, <&classd_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
clock-names = "pclk", "gclk";
status = "disabled";
};
@@ -1495,10 +963,10 @@
interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
<65 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-names = "int0", "int1";
- clocks = <&can1_clk>, <&can1_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
clock-names = "hclk", "cclk";
- assigned-clocks = <&can1_gclk>;
- assigned-clock-parents = <&utmi>;
+ assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
assigned-clock-rates = <40000000>;
bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>;
status = "disabled";
--
2.19.1
Powered by blists - more mailing lists