[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181016145651eucas1p1ea84684e37e67b4161548e6cff489cb8~eHqPK-tM31616816168eucas1p1y@eucas1p1.samsung.com>
Date: Tue, 16 Oct 2018 16:56:20 +0200
From: Lukasz Luba <l.luba@...tner.samsung.com>
To: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org
Cc: rui.zhang@...el.com, edubezval@...il.com,
daniel.lezcano@...aro.org, robh+dt@...nel.org,
mark.rutland@....com, corbet@....net, b.zolnierkie@...sung.com,
Lukasz Luba <l.luba@...tner.samsung.com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH 09/11] DT: arm: exynos: add support for thermal trip
irq-mode
This patch adds support for new flash which indicates
that trip point triggers irq when temperature is met.
Exynos5433 supports 8 trip point which will trigger irq.
Above that number other trip points should be registered
without 'irq-mode' flag.
That will force the thermal framework to start polling
the temperature sensor under configured conditions and
handle the trip point.
Cc: Kukjin Kim <kgene@...nel.org>
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Cc: devicetree@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org
Signed-off-by: Lukasz Luba <l.luba@...tner.samsung.com>
---
arch/arm/boot/dts/exynos5420-trip-points.dtsi | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
index a67a3807..9e16970 100644
--- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
+++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
@@ -11,21 +11,25 @@ trips {
cpu-alert-0 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu-alert-1 {
temperature = <103000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu-alert-2 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu-crit-0 {
temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
+ irq-mode;
};
};
--
2.7.4
Powered by blists - more mailing lists