[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20181017092941.3658bd9a@bbrezillon>
Date: Wed, 17 Oct 2018 09:29:41 +0200
From: Boris Brezillon <boris.brezillon@...tlin.com>
To: Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
Cc: Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
Tudor Ambarus <tudor.ambarus@...rochip.com>,
"marek.vasut@...il.com" <marek.vasut@...il.com>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
"computersforpeace@...il.com" <computersforpeace@...il.com>,
"richard@....at" <richard@....at>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"nicolas.ferre@...rochip.com" <nicolas.ferre@...rochip.com>,
"cyrille.pitchen@...rochip.com" <cyrille.pitchen@...rochip.com>,
"linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"Cristian.Birsan@...rochip.com" <Cristian.Birsan@...rochip.com>
Subject: Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP
SPI NOR flash memories
On Wed, 17 Oct 2018 09:10:45 +0200
Boris Brezillon <boris.brezillon@...tlin.com> wrote:
> On Wed, 17 Oct 2018 09:07:24 +0200
> Boris Brezillon <boris.brezillon@...tlin.com> wrote:
>
> > On Wed, 17 Oct 2018 02:07:43 +0000
> > Yogesh Narayan Gaur <yogeshnarayan.gaur@....com> wrote:
> >
> > > >
> > > Actually there is no entry of s25fs512s in current spi-nor.c file.
> > > For my connected flash part, jedec ID read points to s25fl512s. I
> > > have asked my board team to confirm the name of exact connected flash
> > > part. When I check the data sheet of s25fs512s, it also points to the
> > > same Jedec ID information. { "s25fl512s", INFO(0x010220, 0x4d00, 256
> > > * 1024, 256, ....}
> > >
> > > But as stated earlier, if I skip reading SFDP or read using 1-1-1
> > > protocol then read are always correct. For 1-4-4 protocol read are
> > > wrong and on further debugging found that Read code of 0x6C is being
> > > send as opcode instead of 0xEC.
> > >
> > > If I revert this patch, reads are working fine.
> >
> > Can you try with the following patch?
> >
>
> Hm, nevermind. The problem is actually not related to 4B vs non-4B mode
> but 1-1-4 vs 1-4-4 modes.
>
Can you try with this patch applied?
--->8---
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 9407ca5f9443..cf33d834698c 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -3132,6 +3132,17 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
switch (SFDP_PARAM_HEADER_ID(param_header)) {
case SFDP_SECTOR_MAP_ID:
err = spi_nor_parse_smpt(nor, param_header);
+ if (err) {
+ dev_warn(dev,
+ "failed to parse SMPT (err = %d)\n",
+ err);
+ /*
+ * SMPT parsing is optional, let's not drop
+ * all information we extracted so far just
+ * because it failed.
+ */
+ err = 0;
+ }
break;
default:
Powered by blists - more mailing lists