| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181017074114.28239-7-kishon@ti.com>
Date: Wed, 17 Oct 2018 13:10:59 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Murali Karicheri <m-karicheri2@...com>,
Jingoo Han <jingoohan1@...il.com>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>
CC: Rob Herring <robh+dt@...nel.org>, <linux-pci@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Kishon Vijay Abraham I <kishon@...com>
Subject: [PATCH v2 06/21] PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c
No functional change. Having two different files for keystone PCI driver
doesn't serve any purpose. Merge pci-keystone-dw.c and pci-keystone.c
into a single pci-keystone.c file and remove pci-keystone.h
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
MAINTAINERS | 2 +-
drivers/pci/controller/dwc/Makefile | 2 +-
drivers/pci/controller/dwc/pci-keystone-dw.c | 483 ------------------
drivers/pci/controller/dwc/pci-keystone.c | 489 ++++++++++++++++++-
drivers/pci/controller/dwc/pci-keystone.h | 56 ---
5 files changed, 490 insertions(+), 542 deletions(-)
delete mode 100644 drivers/pci/controller/dwc/pci-keystone-dw.c
delete mode 100644 drivers/pci/controller/dwc/pci-keystone.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 6ac000cc006d..707f3a5133d3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11189,7 +11189,7 @@ M: Murali Karicheri <m-karicheri2@...com>
L: linux-pci@...r.kernel.org
L: linux-arm-kernel@...ts.infradead.org (moderated for non-subscribers)
S: Maintained
-F: drivers/pci/controller/dwc/*keystone*
+F: drivers/pci/controller/dwc/pci-keystone.c
PCI ENDPOINT SUBSYSTEM
M: Kishon Vijay Abraham I <kishon@...com>
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 5d2ce72c7a52..fcf91eacfc63 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -7,7 +7,7 @@ obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
-obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
+obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
diff --git a/drivers/pci/controller/dwc/pci-keystone-dw.c b/drivers/pci/controller/dwc/pci-keystone-dw.c
deleted file mode 100644
index 4bd6c6e2b177..000000000000
--- a/drivers/pci/controller/dwc/pci-keystone-dw.c
+++ /dev/null
@@ -1,483 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * DesignWare application register space functions for Keystone PCI controller
- *
- * Copyright (C) 2013-2014 Texas Instruments., Ltd.
- * http://www.ti.com
- *
- * Author: Murali Karicheri <m-karicheri2@...com>
- */
-
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/irqreturn.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_pci.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-
-#include "pcie-designware.h"
-#include "pci-keystone.h"
-
-/* Application register defines */
-#define LTSSM_EN_VAL 1
-#define LTSSM_STATE_MASK 0x1f
-#define LTSSM_STATE_L0 0x11
-#define DBI_CS2_EN_VAL 0x20
-#define OB_XLAT_EN_VAL 2
-
-/* Application registers */
-#define CMD_STATUS 0x004
-#define CFG_SETUP 0x008
-#define OB_SIZE 0x030
-#define CFG_PCIM_WIN_SZ_IDX 3
-#define CFG_PCIM_WIN_CNT 32
-#define SPACE0_REMOTE_CFG_OFFSET 0x1000
-#define OB_OFFSET_INDEX(n) (0x200 + (8 * n))
-#define OB_OFFSET_HI(n) (0x204 + (8 * n))
-
-/* IRQ register defines */
-#define IRQ_EOI 0x050
-#define IRQ_STATUS 0x184
-#define IRQ_ENABLE_SET 0x188
-#define IRQ_ENABLE_CLR 0x18c
-
-#define MSI_IRQ 0x054
-#define MSI0_IRQ_STATUS 0x104
-#define MSI0_IRQ_ENABLE_SET 0x108
-#define MSI0_IRQ_ENABLE_CLR 0x10c
-#define IRQ_STATUS 0x184
-#define MSI_IRQ_OFFSET 4
-
-/* Error IRQ bits */
-#define ERR_AER BIT(5) /* ECRC error */
-#define ERR_AXI BIT(4) /* AXI tag lookup fatal error */
-#define ERR_CORR BIT(3) /* Correctable error */
-#define ERR_NONFATAL BIT(2) /* Non-fatal error */
-#define ERR_FATAL BIT(1) /* Fatal error */
-#define ERR_SYS BIT(0) /* System (fatal, non-fatal, or correctable) */
-#define ERR_IRQ_ALL (ERR_AER | ERR_AXI | ERR_CORR | \
- ERR_NONFATAL | ERR_FATAL | ERR_SYS)
-#define ERR_FATAL_IRQ (ERR_FATAL | ERR_AXI)
-#define ERR_IRQ_STATUS_RAW 0x1c0
-#define ERR_IRQ_STATUS 0x1c4
-#define ERR_IRQ_ENABLE_SET 0x1c8
-#define ERR_IRQ_ENABLE_CLR 0x1cc
-
-/* Config space registers */
-#define DEBUG0 0x728
-
-#define to_keystone_pcie(x) dev_get_drvdata((x)->dev)
-
-static inline void update_reg_offset_bit_pos(u32 offset, u32 *reg_offset,
- u32 *bit_pos)
-{
- *reg_offset = offset % 8;
- *bit_pos = offset >> 3;
-}
-
-phys_addr_t ks_dw_pcie_get_msi_addr(struct pcie_port *pp)
-{
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
-
- return ks_pcie->app.start + MSI_IRQ;
-}
-
-static u32 ks_dw_app_readl(struct keystone_pcie *ks_pcie, u32 offset)
-{
- return readl(ks_pcie->va_app_base + offset);
-}
-
-static void ks_dw_app_writel(struct keystone_pcie *ks_pcie, u32 offset, u32 val)
-{
- writel(val, ks_pcie->va_app_base + offset);
-}
-
-void ks_dw_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset)
-{
- struct dw_pcie *pci = ks_pcie->pci;
- struct pcie_port *pp = &pci->pp;
- struct device *dev = pci->dev;
- u32 pending, vector;
- int src, virq;
-
- pending = ks_dw_app_readl(ks_pcie, MSI0_IRQ_STATUS + (offset << 4));
-
- /*
- * MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit
- * shows 1, 9, 17, 25 and so forth
- */
- for (src = 0; src < 4; src++) {
- if (BIT(src) & pending) {
- vector = offset + (src << 3);
- virq = irq_linear_revmap(pp->irq_domain, vector);
- dev_dbg(dev, "irq: bit %d, vector %d, virq %d\n",
- src, vector, virq);
- generic_handle_irq(virq);
- }
- }
-}
-
-void ks_dw_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
-{
- u32 reg_offset, bit_pos;
- struct keystone_pcie *ks_pcie;
- struct dw_pcie *pci;
-
- pci = to_dw_pcie_from_pp(pp);
- ks_pcie = to_keystone_pcie(pci);
- update_reg_offset_bit_pos(irq, ®_offset, &bit_pos);
-
- ks_dw_app_writel(ks_pcie, MSI0_IRQ_STATUS + (reg_offset << 4),
- BIT(bit_pos));
- ks_dw_app_writel(ks_pcie, IRQ_EOI, reg_offset + MSI_IRQ_OFFSET);
-}
-
-void ks_dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
-{
- u32 reg_offset, bit_pos;
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
-
- update_reg_offset_bit_pos(irq, ®_offset, &bit_pos);
- ks_dw_app_writel(ks_pcie, MSI0_IRQ_ENABLE_SET + (reg_offset << 4),
- BIT(bit_pos));
-}
-
-void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
-{
- u32 reg_offset, bit_pos;
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
-
- update_reg_offset_bit_pos(irq, ®_offset, &bit_pos);
- ks_dw_app_writel(ks_pcie, MSI0_IRQ_ENABLE_CLR + (reg_offset << 4),
- BIT(bit_pos));
-}
-
-int ks_dw_pcie_msi_host_init(struct pcie_port *pp)
-{
- return dw_pcie_allocate_domains(pp);
-}
-
-void ks_dw_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie)
-{
- int i;
-
- for (i = 0; i < PCI_NUM_INTX; i++)
- ks_dw_app_writel(ks_pcie, IRQ_ENABLE_SET + (i << 4), 0x1);
-}
-
-void ks_dw_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie, int offset)
-{
- struct dw_pcie *pci = ks_pcie->pci;
- struct device *dev = pci->dev;
- u32 pending;
- int virq;
-
- pending = ks_dw_app_readl(ks_pcie, IRQ_STATUS + (offset << 4));
-
- if (BIT(0) & pending) {
- virq = irq_linear_revmap(ks_pcie->legacy_irq_domain, offset);
- dev_dbg(dev, ": irq: irq_offset %d, virq %d\n", offset, virq);
- generic_handle_irq(virq);
- }
-
- /* EOI the INTx interrupt */
- ks_dw_app_writel(ks_pcie, IRQ_EOI, offset);
-}
-
-void ks_dw_pcie_enable_error_irq(struct keystone_pcie *ks_pcie)
-{
- ks_dw_app_writel(ks_pcie, ERR_IRQ_ENABLE_SET, ERR_IRQ_ALL);
-}
-
-irqreturn_t ks_dw_pcie_handle_error_irq(struct keystone_pcie *ks_pcie)
-{
- u32 status;
-
- status = ks_dw_app_readl(ks_pcie, ERR_IRQ_STATUS_RAW) & ERR_IRQ_ALL;
- if (!status)
- return IRQ_NONE;
-
- if (status & ERR_FATAL_IRQ)
- dev_err(ks_pcie->pci->dev, "fatal error (status %#010x)\n",
- status);
-
- /* Ack the IRQ; status bits are RW1C */
- ks_dw_app_writel(ks_pcie, ERR_IRQ_STATUS, status);
- return IRQ_HANDLED;
-}
-
-static void ks_dw_pcie_ack_legacy_irq(struct irq_data *d)
-{
-}
-
-static void ks_dw_pcie_mask_legacy_irq(struct irq_data *d)
-{
-}
-
-static void ks_dw_pcie_unmask_legacy_irq(struct irq_data *d)
-{
-}
-
-static struct irq_chip ks_dw_pcie_legacy_irq_chip = {
- .name = "Keystone-PCI-Legacy-IRQ",
- .irq_ack = ks_dw_pcie_ack_legacy_irq,
- .irq_mask = ks_dw_pcie_mask_legacy_irq,
- .irq_unmask = ks_dw_pcie_unmask_legacy_irq,
-};
-
-static int ks_dw_pcie_init_legacy_irq_map(struct irq_domain *d,
- unsigned int irq, irq_hw_number_t hw_irq)
-{
- irq_set_chip_and_handler(irq, &ks_dw_pcie_legacy_irq_chip,
- handle_level_irq);
- irq_set_chip_data(irq, d->host_data);
-
- return 0;
-}
-
-static const struct irq_domain_ops ks_dw_pcie_legacy_irq_domain_ops = {
- .map = ks_dw_pcie_init_legacy_irq_map,
- .xlate = irq_domain_xlate_onetwocell,
-};
-
-/**
- * ks_dw_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask
- * registers
- *
- * Since modification of dbi_cs2 involves different clock domain, read the
- * status back to ensure the transition is complete.
- */
-static void ks_dw_pcie_set_dbi_mode(struct keystone_pcie *ks_pcie)
-{
- u32 val;
-
- val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
- ks_dw_app_writel(ks_pcie, CMD_STATUS, DBI_CS2_EN_VAL | val);
-
- do {
- val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
- } while (!(val & DBI_CS2_EN_VAL));
-}
-
-/**
- * ks_dw_pcie_clear_dbi_mode() - Disable DBI mode
- *
- * Since modification of dbi_cs2 involves different clock domain, read the
- * status back to ensure the transition is complete.
- */
-static void ks_dw_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie)
-{
- u32 val;
-
- val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
- ks_dw_app_writel(ks_pcie, CMD_STATUS, ~DBI_CS2_EN_VAL & val);
-
- do {
- val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
- } while (val & DBI_CS2_EN_VAL);
-}
-
-void ks_dw_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
-{
- struct dw_pcie *pci = ks_pcie->pci;
- struct pcie_port *pp = &pci->pp;
- u32 start = pp->mem->start, end = pp->mem->end;
- int i, tr_size;
- u32 val;
-
- /* Disable BARs for inbound access */
- ks_dw_pcie_set_dbi_mode(ks_pcie);
- dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0);
- dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_1, 0);
- ks_dw_pcie_clear_dbi_mode(ks_pcie);
-
- /* Set outbound translation size per window division */
- ks_dw_app_writel(ks_pcie, OB_SIZE, CFG_PCIM_WIN_SZ_IDX & 0x7);
-
- tr_size = (1 << (CFG_PCIM_WIN_SZ_IDX & 0x7)) * SZ_1M;
-
- /* Using Direct 1:1 mapping of RC <-> PCI memory space */
- for (i = 0; (i < CFG_PCIM_WIN_CNT) && (start < end); i++) {
- ks_dw_app_writel(ks_pcie, OB_OFFSET_INDEX(i), start | 1);
- ks_dw_app_writel(ks_pcie, OB_OFFSET_HI(i), 0);
- start += tr_size;
- }
-
- /* Enable OB translation */
- val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
- ks_dw_app_writel(ks_pcie, CMD_STATUS, OB_XLAT_EN_VAL | val);
-}
-
-/**
- * ks_pcie_cfg_setup() - Set up configuration space address for a device
- *
- * @ks_pcie: ptr to keystone_pcie structure
- * @bus: Bus number the device is residing on
- * @devfn: device, function number info
- *
- * Forms and returns the address of configuration space mapped in PCIESS
- * address space 0. Also configures CFG_SETUP for remote configuration space
- * access.
- *
- * The address space has two regions to access configuration - local and remote.
- * We access local region for bus 0 (as RC is attached on bus 0) and remote
- * region for others with TYPE 1 access when bus > 1. As for device on bus = 1,
- * we will do TYPE 0 access as it will be on our secondary bus (logical).
- * CFG_SETUP is needed only for remote configuration access.
- */
-static void __iomem *ks_pcie_cfg_setup(struct keystone_pcie *ks_pcie, u8 bus,
- unsigned int devfn)
-{
- u8 device = PCI_SLOT(devfn), function = PCI_FUNC(devfn);
- struct dw_pcie *pci = ks_pcie->pci;
- struct pcie_port *pp = &pci->pp;
- u32 regval;
-
- if (bus == 0)
- return pci->dbi_base;
-
- regval = (bus << 16) | (device << 8) | function;
-
- /*
- * Since Bus#1 will be a virtual bus, we need to have TYPE0
- * access only.
- * TYPE 1
- */
- if (bus != 1)
- regval |= BIT(24);
-
- ks_dw_app_writel(ks_pcie, CFG_SETUP, regval);
- return pp->va_cfg0_base;
-}
-
-int ks_dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
- unsigned int devfn, int where, int size, u32 *val)
-{
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
- u8 bus_num = bus->number;
- void __iomem *addr;
-
- addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn);
-
- return dw_pcie_read(addr + where, size, val);
-}
-
-int ks_dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
- unsigned int devfn, int where, int size, u32 val)
-{
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
- u8 bus_num = bus->number;
- void __iomem *addr;
-
- addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn);
-
- return dw_pcie_write(addr + where, size, val);
-}
-
-/**
- * ks_dw_pcie_v3_65_scan_bus() - keystone scan_bus post initialization
- *
- * This sets BAR0 to enable inbound access for MSI_IRQ register
- */
-void ks_dw_pcie_v3_65_scan_bus(struct pcie_port *pp)
-{
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
-
- /* Configure and set up BAR0 */
- ks_dw_pcie_set_dbi_mode(ks_pcie);
-
- /* Enable BAR0 */
- dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1);
- dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1);
-
- ks_dw_pcie_clear_dbi_mode(ks_pcie);
-
- /*
- * For BAR0, just setting bus address for inbound writes (MSI) should
- * be sufficient. Use physical address to avoid any conflicts.
- */
- dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start);
-}
-
-/**
- * ks_dw_pcie_link_up() - Check if link up
- */
-int ks_dw_pcie_link_up(struct dw_pcie *pci)
-{
- u32 val;
-
- val = dw_pcie_readl_dbi(pci, DEBUG0);
- return (val & LTSSM_STATE_MASK) == LTSSM_STATE_L0;
-}
-
-void ks_dw_pcie_initiate_link_train(struct keystone_pcie *ks_pcie)
-{
- u32 val;
-
- /* Disable Link training */
- val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
- val &= ~LTSSM_EN_VAL;
- ks_dw_app_writel(ks_pcie, CMD_STATUS, LTSSM_EN_VAL | val);
-
- /* Initiate Link Training */
- val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
- ks_dw_app_writel(ks_pcie, CMD_STATUS, LTSSM_EN_VAL | val);
-}
-
-/**
- * ks_dw_pcie_host_init() - initialize host for v3_65 dw hardware
- *
- * Ioremap the register resources, initialize legacy irq domain
- * and call dw_pcie_v3_65_host_init() API to initialize the Keystone
- * PCI host controller.
- */
-int __init ks_dw_pcie_host_init(struct keystone_pcie *ks_pcie)
-{
- struct dw_pcie *pci = ks_pcie->pci;
- struct pcie_port *pp = &pci->pp;
- struct device *dev = pci->dev;
- struct platform_device *pdev = to_platform_device(dev);
- struct resource *res;
-
- /* Index 0 is the config reg. space address */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pci->dbi_base = devm_pci_remap_cfg_resource(dev, res);
- if (IS_ERR(pci->dbi_base))
- return PTR_ERR(pci->dbi_base);
-
- /*
- * We set these same and is used in pcie rd/wr_other_conf
- * functions
- */
- pp->va_cfg0_base = pci->dbi_base + SPACE0_REMOTE_CFG_OFFSET;
- pp->va_cfg1_base = pp->va_cfg0_base;
-
- /* Index 1 is the application reg. space address */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- ks_pcie->va_app_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(ks_pcie->va_app_base))
- return PTR_ERR(ks_pcie->va_app_base);
-
- ks_pcie->app = *res;
-
- /* Create legacy IRQ domain */
- ks_pcie->legacy_irq_domain =
- irq_domain_add_linear(ks_pcie->legacy_intc_np,
- PCI_NUM_INTX,
- &ks_dw_pcie_legacy_irq_domain_ops,
- NULL);
- if (!ks_pcie->legacy_irq_domain) {
- dev_err(dev, "Failed to add irq domain for legacy irqs\n");
- return -EINVAL;
- }
-
- return dw_pcie_host_init(pp);
-}
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index f87ade2de711..337464d15775 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -25,13 +25,62 @@
#include <linux/signal.h>
#include "pcie-designware.h"
-#include "pci-keystone.h"
#define DRIVER_NAME "keystone-pcie"
/* DEV_STAT_CTRL */
#define PCIE_CAP_BASE 0x70
+/* Application register defines */
+#define LTSSM_EN_VAL BIT(0)
+#define LTSSM_STATE_MASK 0x1f
+#define LTSSM_STATE_L0 0x11
+#define DBI_CS2_EN_VAL 0x20
+#define OB_XLAT_EN_VAL 2
+
+/* Application registers */
+#define CMD_STATUS 0x004
+#define CFG_SETUP 0x008
+#define OB_SIZE 0x030
+#define CFG_PCIM_WIN_SZ_IDX 3
+#define CFG_PCIM_WIN_CNT 32
+#define SPACE0_REMOTE_CFG_OFFSET 0x1000
+#define OB_OFFSET_INDEX(n) (0x200 + (8 * (n)))
+#define OB_OFFSET_HI(n) (0x204 + (8 * (n)))
+
+/* IRQ register defines */
+#define IRQ_EOI 0x050
+#define IRQ_STATUS 0x184
+#define IRQ_ENABLE_SET 0x188
+#define IRQ_ENABLE_CLR 0x18c
+
+#define MSI_IRQ 0x054
+#define MSI0_IRQ_STATUS 0x104
+#define MSI0_IRQ_ENABLE_SET 0x108
+#define MSI0_IRQ_ENABLE_CLR 0x10c
+#define IRQ_STATUS 0x184
+#define MSI_IRQ_OFFSET 4
+
+/* Error IRQ bits */
+#define ERR_AER BIT(5) /* ECRC error */
+#define ERR_AXI BIT(4) /* AXI tag lookup fatal error */
+#define ERR_CORR BIT(3) /* Correctable error */
+#define ERR_NONFATAL BIT(2) /* Non-fatal error */
+#define ERR_FATAL BIT(1) /* Fatal error */
+#define ERR_SYS BIT(0) /* System (fatal, non-fatal, or correctable) */
+#define ERR_IRQ_ALL (ERR_AER | ERR_AXI | ERR_CORR | \
+ ERR_NONFATAL | ERR_FATAL | ERR_SYS)
+#define ERR_FATAL_IRQ (ERR_FATAL | ERR_AXI)
+#define ERR_IRQ_STATUS_RAW 0x1c0
+#define ERR_IRQ_STATUS 0x1c4
+#define ERR_IRQ_ENABLE_SET 0x1c8
+#define ERR_IRQ_ENABLE_CLR 0x1cc
+
+/* Config space registers */
+#define DEBUG0 0x728
+
+#define MAX_MSI_HOST_IRQS 8
+
/* PCIE controller device IDs */
#define PCIE_RC_K2HK 0xb008
#define PCIE_RC_K2E 0xb009
@@ -40,6 +89,444 @@
#define to_keystone_pcie(x) dev_get_drvdata((x)->dev)
+struct keystone_pcie {
+ struct dw_pcie *pci;
+ struct clk *clk;
+ /* PCI Device ID */
+ u32 device_id;
+ int num_legacy_host_irqs;
+ int legacy_host_irqs[PCI_NUM_INTX];
+ struct device_node *legacy_intc_np;
+
+ int num_msi_host_irqs;
+ int msi_host_irqs[MAX_MSI_HOST_IRQS];
+ struct device_node *msi_intc_np;
+ struct irq_domain *legacy_irq_domain;
+ struct device_node *np;
+
+ int error_irq;
+
+ /* Application register space */
+ void __iomem *va_app_base; /* DT 1st resource */
+ struct resource app;
+};
+
+static inline void update_reg_offset_bit_pos(u32 offset, u32 *reg_offset,
+ u32 *bit_pos)
+{
+ *reg_offset = offset % 8;
+ *bit_pos = offset >> 3;
+}
+
+static phys_addr_t ks_dw_pcie_get_msi_addr(struct pcie_port *pp)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+
+ return ks_pcie->app.start + MSI_IRQ;
+}
+
+static u32 ks_dw_app_readl(struct keystone_pcie *ks_pcie, u32 offset)
+{
+ return readl(ks_pcie->va_app_base + offset);
+}
+
+static void ks_dw_app_writel(struct keystone_pcie *ks_pcie, u32 offset, u32 val)
+{
+ writel(val, ks_pcie->va_app_base + offset);
+}
+
+static void ks_dw_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset)
+{
+ struct dw_pcie *pci = ks_pcie->pci;
+ struct pcie_port *pp = &pci->pp;
+ struct device *dev = pci->dev;
+ u32 pending, vector;
+ int src, virq;
+
+ pending = ks_dw_app_readl(ks_pcie, MSI0_IRQ_STATUS + (offset << 4));
+
+ /*
+ * MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit
+ * shows 1, 9, 17, 25 and so forth
+ */
+ for (src = 0; src < 4; src++) {
+ if (BIT(src) & pending) {
+ vector = offset + (src << 3);
+ virq = irq_linear_revmap(pp->irq_domain, vector);
+ dev_dbg(dev, "irq: bit %d, vector %d, virq %d\n",
+ src, vector, virq);
+ generic_handle_irq(virq);
+ }
+ }
+}
+
+static void ks_dw_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
+{
+ u32 reg_offset, bit_pos;
+ struct keystone_pcie *ks_pcie;
+ struct dw_pcie *pci;
+
+ pci = to_dw_pcie_from_pp(pp);
+ ks_pcie = to_keystone_pcie(pci);
+ update_reg_offset_bit_pos(irq, ®_offset, &bit_pos);
+
+ ks_dw_app_writel(ks_pcie, MSI0_IRQ_STATUS + (reg_offset << 4),
+ BIT(bit_pos));
+ ks_dw_app_writel(ks_pcie, IRQ_EOI, reg_offset + MSI_IRQ_OFFSET);
+}
+
+static void ks_dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
+{
+ u32 reg_offset, bit_pos;
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+
+ update_reg_offset_bit_pos(irq, ®_offset, &bit_pos);
+ ks_dw_app_writel(ks_pcie, MSI0_IRQ_ENABLE_SET + (reg_offset << 4),
+ BIT(bit_pos));
+}
+
+static void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
+{
+ u32 reg_offset, bit_pos;
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+
+ update_reg_offset_bit_pos(irq, ®_offset, &bit_pos);
+ ks_dw_app_writel(ks_pcie, MSI0_IRQ_ENABLE_CLR + (reg_offset << 4),
+ BIT(bit_pos));
+}
+
+static int ks_dw_pcie_msi_host_init(struct pcie_port *pp)
+{
+ return dw_pcie_allocate_domains(pp);
+}
+
+static void ks_dw_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie)
+{
+ int i;
+
+ for (i = 0; i < PCI_NUM_INTX; i++)
+ ks_dw_app_writel(ks_pcie, IRQ_ENABLE_SET + (i << 4), 0x1);
+}
+
+static void ks_dw_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie,
+ int offset)
+{
+ struct dw_pcie *pci = ks_pcie->pci;
+ struct device *dev = pci->dev;
+ u32 pending;
+ int virq;
+
+ pending = ks_dw_app_readl(ks_pcie, IRQ_STATUS + (offset << 4));
+
+ if (BIT(0) & pending) {
+ virq = irq_linear_revmap(ks_pcie->legacy_irq_domain, offset);
+ dev_dbg(dev, ": irq: irq_offset %d, virq %d\n", offset, virq);
+ generic_handle_irq(virq);
+ }
+
+ /* EOI the INTx interrupt */
+ ks_dw_app_writel(ks_pcie, IRQ_EOI, offset);
+}
+
+static void ks_dw_pcie_enable_error_irq(struct keystone_pcie *ks_pcie)
+{
+ ks_dw_app_writel(ks_pcie, ERR_IRQ_ENABLE_SET, ERR_IRQ_ALL);
+}
+
+static irqreturn_t ks_dw_pcie_handle_error_irq(struct keystone_pcie *ks_pcie)
+{
+ u32 status;
+
+ status = ks_dw_app_readl(ks_pcie, ERR_IRQ_STATUS_RAW) & ERR_IRQ_ALL;
+ if (!status)
+ return IRQ_NONE;
+
+ if (status & ERR_FATAL_IRQ)
+ dev_err(ks_pcie->pci->dev, "fatal error (status %#010x)\n",
+ status);
+
+ /* Ack the IRQ; status bits are RW1C */
+ ks_dw_app_writel(ks_pcie, ERR_IRQ_STATUS, status);
+ return IRQ_HANDLED;
+}
+
+static void ks_dw_pcie_ack_legacy_irq(struct irq_data *d)
+{
+}
+
+static void ks_dw_pcie_mask_legacy_irq(struct irq_data *d)
+{
+}
+
+static void ks_dw_pcie_unmask_legacy_irq(struct irq_data *d)
+{
+}
+
+static struct irq_chip ks_dw_pcie_legacy_irq_chip = {
+ .name = "Keystone-PCI-Legacy-IRQ",
+ .irq_ack = ks_dw_pcie_ack_legacy_irq,
+ .irq_mask = ks_dw_pcie_mask_legacy_irq,
+ .irq_unmask = ks_dw_pcie_unmask_legacy_irq,
+};
+
+static int ks_dw_pcie_init_legacy_irq_map(struct irq_domain *d,
+ unsigned int irq,
+ irq_hw_number_t hw_irq)
+{
+ irq_set_chip_and_handler(irq, &ks_dw_pcie_legacy_irq_chip,
+ handle_level_irq);
+ irq_set_chip_data(irq, d->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops ks_dw_pcie_legacy_irq_domain_ops = {
+ .map = ks_dw_pcie_init_legacy_irq_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+/**
+ * ks_dw_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask
+ * registers
+ *
+ * Since modification of dbi_cs2 involves different clock domain, read the
+ * status back to ensure the transition is complete.
+ */
+static void ks_dw_pcie_set_dbi_mode(struct keystone_pcie *ks_pcie)
+{
+ u32 val;
+
+ val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
+ ks_dw_app_writel(ks_pcie, CMD_STATUS, DBI_CS2_EN_VAL | val);
+
+ do {
+ val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
+ } while (!(val & DBI_CS2_EN_VAL));
+}
+
+/**
+ * ks_dw_pcie_clear_dbi_mode() - Disable DBI mode
+ *
+ * Since modification of dbi_cs2 involves different clock domain, read the
+ * status back to ensure the transition is complete.
+ */
+static void ks_dw_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie)
+{
+ u32 val;
+
+ val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
+ ks_dw_app_writel(ks_pcie, CMD_STATUS, ~DBI_CS2_EN_VAL & val);
+
+ do {
+ val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
+ } while (val & DBI_CS2_EN_VAL);
+}
+
+static void ks_dw_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
+{
+ struct dw_pcie *pci = ks_pcie->pci;
+ struct pcie_port *pp = &pci->pp;
+ u32 start = pp->mem->start, end = pp->mem->end;
+ int i, tr_size;
+ u32 val;
+
+ /* Disable BARs for inbound access */
+ ks_dw_pcie_set_dbi_mode(ks_pcie);
+ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0);
+ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_1, 0);
+ ks_dw_pcie_clear_dbi_mode(ks_pcie);
+
+ /* Set outbound translation size per window division */
+ ks_dw_app_writel(ks_pcie, OB_SIZE, CFG_PCIM_WIN_SZ_IDX & 0x7);
+
+ tr_size = (1 << (CFG_PCIM_WIN_SZ_IDX & 0x7)) * SZ_1M;
+
+ /* Using Direct 1:1 mapping of RC <-> PCI memory space */
+ for (i = 0; (i < CFG_PCIM_WIN_CNT) && (start < end); i++) {
+ ks_dw_app_writel(ks_pcie, OB_OFFSET_INDEX(i), start | 1);
+ ks_dw_app_writel(ks_pcie, OB_OFFSET_HI(i), 0);
+ start += tr_size;
+ }
+
+ /* Enable OB translation */
+ val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
+ ks_dw_app_writel(ks_pcie, CMD_STATUS, OB_XLAT_EN_VAL | val);
+}
+
+/**
+ * ks_pcie_cfg_setup() - Set up configuration space address for a device
+ *
+ * @ks_pcie: ptr to keystone_pcie structure
+ * @bus: Bus number the device is residing on
+ * @devfn: device, function number info
+ *
+ * Forms and returns the address of configuration space mapped in PCIESS
+ * address space 0. Also configures CFG_SETUP for remote configuration space
+ * access.
+ *
+ * The address space has two regions to access configuration - local and remote.
+ * We access local region for bus 0 (as RC is attached on bus 0) and remote
+ * region for others with TYPE 1 access when bus > 1. As for device on bus = 1,
+ * we will do TYPE 0 access as it will be on our secondary bus (logical).
+ * CFG_SETUP is needed only for remote configuration access.
+ */
+static void __iomem *ks_pcie_cfg_setup(struct keystone_pcie *ks_pcie, u8 bus,
+ unsigned int devfn)
+{
+ u8 device = PCI_SLOT(devfn), function = PCI_FUNC(devfn);
+ struct dw_pcie *pci = ks_pcie->pci;
+ struct pcie_port *pp = &pci->pp;
+ u32 regval;
+
+ if (bus == 0)
+ return pci->dbi_base;
+
+ regval = (bus << 16) | (device << 8) | function;
+
+ /*
+ * Since Bus#1 will be a virtual bus, we need to have TYPE0
+ * access only.
+ * TYPE 1
+ */
+ if (bus != 1)
+ regval |= BIT(24);
+
+ ks_dw_app_writel(ks_pcie, CFG_SETUP, regval);
+ return pp->va_cfg0_base;
+}
+
+static int ks_dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
+ unsigned int devfn, int where, int size,
+ u32 *val)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+ u8 bus_num = bus->number;
+ void __iomem *addr;
+
+ addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn);
+
+ return dw_pcie_read(addr + where, size, val);
+}
+
+static int ks_dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
+ unsigned int devfn, int where, int size,
+ u32 val)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+ u8 bus_num = bus->number;
+ void __iomem *addr;
+
+ addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn);
+
+ return dw_pcie_write(addr + where, size, val);
+}
+
+/**
+ * ks_dw_pcie_v3_65_scan_bus() - keystone scan_bus post initialization
+ *
+ * This sets BAR0 to enable inbound access for MSI_IRQ register
+ */
+static void ks_dw_pcie_v3_65_scan_bus(struct pcie_port *pp)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+
+ /* Configure and set up BAR0 */
+ ks_dw_pcie_set_dbi_mode(ks_pcie);
+
+ /* Enable BAR0 */
+ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1);
+ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1);
+
+ ks_dw_pcie_clear_dbi_mode(ks_pcie);
+
+ /*
+ * For BAR0, just setting bus address for inbound writes (MSI) should
+ * be sufficient. Use physical address to avoid any conflicts.
+ */
+ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start);
+}
+
+/**
+ * ks_dw_pcie_link_up() - Check if link up
+ */
+static int ks_dw_pcie_link_up(struct dw_pcie *pci)
+{
+ u32 val;
+
+ val = dw_pcie_readl_dbi(pci, DEBUG0);
+ return (val & LTSSM_STATE_MASK) == LTSSM_STATE_L0;
+}
+
+static void ks_dw_pcie_initiate_link_train(struct keystone_pcie *ks_pcie)
+{
+ u32 val;
+
+ /* Disable Link training */
+ val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
+ val &= ~LTSSM_EN_VAL;
+ ks_dw_app_writel(ks_pcie, CMD_STATUS, LTSSM_EN_VAL | val);
+
+ /* Initiate Link Training */
+ val = ks_dw_app_readl(ks_pcie, CMD_STATUS);
+ ks_dw_app_writel(ks_pcie, CMD_STATUS, LTSSM_EN_VAL | val);
+}
+
+/**
+ * ks_dw_pcie_host_init() - initialize host for v3_65 dw hardware
+ *
+ * Ioremap the register resources, initialize legacy irq domain
+ * and call dw_pcie_v3_65_host_init() API to initialize the Keystone
+ * PCI host controller.
+ */
+static int __init ks_dw_pcie_host_init(struct keystone_pcie *ks_pcie)
+{
+ struct dw_pcie *pci = ks_pcie->pci;
+ struct pcie_port *pp = &pci->pp;
+ struct device *dev = pci->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res;
+
+ /* Index 0 is the config reg. space address */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pci->dbi_base = devm_pci_remap_cfg_resource(dev, res);
+ if (IS_ERR(pci->dbi_base))
+ return PTR_ERR(pci->dbi_base);
+
+ /*
+ * We set these same and is used in pcie rd/wr_other_conf
+ * functions
+ */
+ pp->va_cfg0_base = pci->dbi_base + SPACE0_REMOTE_CFG_OFFSET;
+ pp->va_cfg1_base = pp->va_cfg0_base;
+
+ /* Index 1 is the application reg. space address */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ ks_pcie->va_app_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ks_pcie->va_app_base))
+ return PTR_ERR(ks_pcie->va_app_base);
+
+ ks_pcie->app = *res;
+
+ /* Create legacy IRQ domain */
+ ks_pcie->legacy_irq_domain =
+ irq_domain_add_linear(ks_pcie->legacy_intc_np,
+ PCI_NUM_INTX,
+ &ks_dw_pcie_legacy_irq_domain_ops,
+ NULL);
+ if (!ks_pcie->legacy_irq_domain) {
+ dev_err(dev, "Failed to add irq domain for legacy irqs\n");
+ return -EINVAL;
+ }
+
+ return dw_pcie_host_init(pp);
+}
+
static void quirk_limit_mrrs(struct pci_dev *dev)
{
struct pci_bus *bus = dev->bus;
diff --git a/drivers/pci/controller/dwc/pci-keystone.h b/drivers/pci/controller/dwc/pci-keystone.h
deleted file mode 100644
index 4eacc263f157..000000000000
--- a/drivers/pci/controller/dwc/pci-keystone.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Keystone PCI Controller's common includes
- *
- * Copyright (C) 2013-2014 Texas Instruments., Ltd.
- * http://www.ti.com
- *
- * Author: Murali Karicheri <m-karicheri2@...com>
- */
-
-#define MAX_MSI_HOST_IRQS 8
-
-struct keystone_pcie {
- struct dw_pcie *pci;
- struct clk *clk;
- /* PCI Device ID */
- u32 device_id;
- int num_legacy_host_irqs;
- int legacy_host_irqs[PCI_NUM_INTX];
- struct device_node *legacy_intc_np;
-
- int num_msi_host_irqs;
- int msi_host_irqs[MAX_MSI_HOST_IRQS];
- struct device_node *msi_intc_np;
- struct irq_domain *legacy_irq_domain;
- struct device_node *np;
-
- int error_irq;
-
- /* Application register space */
- void __iomem *va_app_base; /* DT 1st resource */
- struct resource app;
-};
-
-/* Keystone DW specific MSI controller APIs/definitions */
-void ks_dw_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset);
-phys_addr_t ks_dw_pcie_get_msi_addr(struct pcie_port *pp);
-
-/* Keystone specific PCI controller APIs */
-void ks_dw_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie);
-void ks_dw_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie, int offset);
-void ks_dw_pcie_enable_error_irq(struct keystone_pcie *ks_pcie);
-irqreturn_t ks_dw_pcie_handle_error_irq(struct keystone_pcie *ks_pcie);
-int ks_dw_pcie_host_init(struct keystone_pcie *ks_pcie);
-int ks_dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
- unsigned int devfn, int where, int size, u32 val);
-int ks_dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
- unsigned int devfn, int where, int size, u32 *val);
-void ks_dw_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie);
-void ks_dw_pcie_initiate_link_train(struct keystone_pcie *ks_pcie);
-void ks_dw_pcie_msi_irq_ack(int i, struct pcie_port *pp);
-void ks_dw_pcie_msi_set_irq(struct pcie_port *pp, int irq);
-void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq);
-void ks_dw_pcie_v3_65_scan_bus(struct pcie_port *pp);
-int ks_dw_pcie_msi_host_init(struct pcie_port *pp);
-int ks_dw_pcie_link_up(struct dw_pcie *pci);
--
2.17.1
Powered by blists - more mailing lists