[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1539791563-5959-15-git-send-email-b.zolnierkie@samsung.com>
Date: Wed, 17 Oct 2018 17:52:40 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Zhang Rui <rui.zhang@...el.com>,
Eduardo Valentin <edubezval@...il.com>
Cc: Amit kucheria <amit.kucheria@...aro.org>,
Eric Anholt <eric@...olt.net>,
Stefan Wahren <stefan.wahren@...e.com>,
Markus Mayer <mmayer@...adcom.com>,
bcm-kernel-feedback-list@...adcom.com,
Heiko Stuebner <heiko@...ech.de>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Keerthy <j-keerthy@...com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Jun Nie <jun.nie@...aro.org>,
Baoyou Xie <baoyou.xie@...aro.org>,
Shawn Guo <shawnguo@...nel.org>, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, b.zolnierkie@...sung.com
Subject: [PATCH v2 14/17] thermal: ti-soc-thermal: enable+check sensor after
its setup is finished
Enable sensor after setting sensor data and check sensor after
writing update interval.
Cc: Eduardo Valentin <edubezval@...il.com>
Cc: Keerthy <j-keerthy@...com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index aa15719..4675d96 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -197,13 +197,15 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
return PTR_ERR(data->ti_thermal);
}
+ ti_bandgap_set_sensor_data(bgp, id, data);
+
thermal_zone_set_mode(data->ti_thermal, THERMAL_DEVICE_ENABLED);
- thermal_zone_device_check(data->ti_thermal);
- ti_bandgap_set_sensor_data(bgp, id, data);
ti_bandgap_write_update_interval(bgp, data->sensor_id,
data->ti_thermal->polling_delay);
+ thermal_zone_device_check(data->ti_thermal);
+
return 0;
}
--
1.9.1
Powered by blists - more mailing lists