linux-kernel - [PATCH v2 16/17] thermal: zx2967: enable+check sensor after its setup is finished

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 17 Oct 2018 17:52:42 +0200
From:   Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To:     Zhang Rui <rui.zhang@...el.com>,
        Eduardo Valentin <edubezval@...il.com>
Cc:     Amit kucheria <amit.kucheria@...aro.org>,
        Eric Anholt <eric@...olt.net>,
        Stefan Wahren <stefan.wahren@...e.com>,
        Markus Mayer <mmayer@...adcom.com>,
        bcm-kernel-feedback-list@...adcom.com,
        Heiko Stuebner <heiko@...ech.de>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Keerthy <j-keerthy@...com>,
        Masahiro Yamada <yamada.masahiro@...ionext.com>,
        Jun Nie <jun.nie@...aro.org>,
        Baoyou Xie <baoyou.xie@...aro.org>,
        Shawn Guo <shawnguo@...nel.org>, linux-pm@...r.kernel.org,
        linux-kernel@...r.kernel.org, b.zolnierkie@...sung.com
Subject: [PATCH v2 16/17] thermal: zx2967: enable+check sensor after its
 setup is finished

Enable+check sensor after checking sensor coefficients.

Cc: Jun Nie <jun.nie@...aro.org>
Cc: Baoyou Xie <baoyou.xie@...aro.org>
Cc: Shawn Guo <shawnguo@...nel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
 drivers/thermal/zx2967_thermal.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/zx2967_thermal.c b/drivers/thermal/zx2967_thermal.c
index 3c08e1d..4e30b1f 100644
--- a/drivers/thermal/zx2967_thermal.c
+++ b/drivers/thermal/zx2967_thermal.c
@@ -168,9 +168,6 @@ static int zx2967_thermal_probe(struct platform_device *pdev)
 		goto disable_clk_all;
 	}
 
-	thermal_zone_set_mode(priv->tzd, THERMAL_DEVICE_ENABLED);
-	thermal_zone_device_check(priv->tzd);
-
 	if (priv->tzd->tzp->slope == 0) {
 		thermal_zone_of_sensor_unregister(&pdev->dev, priv->tzd);
 		dev_err(&pdev->dev, "coefficients of sensor is invalid\n");
@@ -178,6 +175,9 @@ static int zx2967_thermal_probe(struct platform_device *pdev)
 		goto disable_clk_all;
 	}
 
+	thermal_zone_set_mode(priv->tzd, THERMAL_DEVICE_ENABLED);
+	thermal_zone_device_check(priv->tzd);
+
 	priv->dev = &pdev->dev;
 	platform_set_drvdata(pdev, priv);
 
-- 
1.9.1