[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181018210933.113592-4-evgreen@chromium.org>
Date: Thu, 18 Oct 2018 14:09:31 -0700
From: Evan Green <evgreen@...omium.org>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Kishon Vijay Abraham I <kishon@...com>,
Douglas Anderson <dianders@...omium.org>,
Manu Gautam <mgautam@...eaurora.org>,
Can Guo <cang@...eaurora.org>,
Vivek Gautam <vivek.gautam@...eaurora.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
swboyd@...omium.org
Cc: Evan Green <evgreen@...omium.org>
Subject: [PATCH v2 3/5] arm64: dts: qcom: sdm845: add UFS controller
This change adds the UFS controller and PHY to SDM845.
Signed-off-by: Evan Green <evgreen@...omium.org>
Signed-off-by: Douglas Anderson <dianders@...omium.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 67 ++++++++++++++++++++++++++++++++++++
1 file changed, 67 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b72bdb0a31a5..9c72edb678ec 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -808,6 +808,73 @@
};
};
+ ufshc1: ufshc@...4000 {
+ compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0x1d84000 0x2500>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufsphy1_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
+ clock-names =
+ "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ clocks =
+ <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ freq-table-hz =
+ <50000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <37500000 150000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ status = "disabled";
+ };
+
+ ufsphy1: phy@...7000 {
+ compatible = "qcom,sdm845-qmp-ufs-phy";
+ reg = <0x1d87000 0x18c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+ status = "disabled";
+
+ ufsphy1_lanes: lanes@...7400 {
+ reg = <0x1d87400 0x108>,
+ <0x1d87600 0x1e0>,
+ <0x1d87c00 0x1dc>,
+ <0x1d87800 0x108>,
+ <0x1d87a00 0x1e0>;
+ #phy-cells = <0>;
+ };
+ };
+
tcsr_mutex_regs: syscon@...0000 {
compatible = "syscon";
reg = <0x1f40000 0x40000>;
--
2.16.4
Powered by blists - more mailing lists