lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1539845238-24114-1-git-send-email-Anson.Huang@nxp.com>
Date:   Thu, 18 Oct 2018 06:51:55 +0000
From:   Anson Huang <anson.huang@....com>
To:     "shawnguo@...nel.org" <shawnguo@...nel.org>,
        "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
        "kernel@...gutronix.de" <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        "mturquette@...libre.com" <mturquette@...libre.com>,
        "sboyd@...nel.org" <sboyd@...nel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-clk@...r.kernel.org" <linux-clk@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     dl-linux-imx <linux-imx@....com>
Subject: [PATCH] clk: imx7d: remove UART1 clock setting

There is clock assignment in dtb for UART1, so setting
UART1 clock in clock driver is NOT necessary.

Signed-off-by: Anson Huang <Anson.Huang@....com>
---
 drivers/clk/imx/clk-imx7d.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index adb08f6..06c105d 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -886,9 +886,6 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	/* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */
 	clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
 
-	/* set uart module clock's parent clock source that must be great then 80MHz */
-	clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
-
 	/* Set clock rate for USBPHY, the USB_PLL at CCM is from USBOTG2 */
 	clks[IMX7D_USB1_MAIN_480M_CLK] = imx_clk_fixed_factor("pll_usb1_main_clk", "osc", 20, 1);
 	clks[IMX7D_USB_MAIN_480M_CLK] = imx_clk_fixed_factor("pll_usb_main_clk", "osc", 20, 1);
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ