lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 18 Oct 2018 19:54:42 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Borislav Petkov <bp@...e.de>,
        Kairui Song <kasong@...hat.com>,
        Tom Lendacky <thomas.lendacky@....com>, tglx@...utronix.de,
        mingo@...hat.com, hpa@...or.com, brijesh.singh@....com,
        kexec@...ts.infradead.org, dyoung@...hat.com, bhe@...hat.com,
        ghook@...hat.com, Sasha Levin <alexander.levin@...rosoft.com>
Subject: [PATCH 4.18 49/53] x86/boot: Fix kexec booting failure in the SEV bit detection code

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kairui Song <kasong@...hat.com>

[ Upstream commit bdec8d7fa55e6f5314ed72e5a0b435d90ff90548 ]

Commit

  1958b5fc4010 ("x86/boot: Add early boot support when running with SEV active")

can occasionally cause system resets when kexec-ing a second kernel even
if SEV is not active.

That's because get_sev_encryption_bit() uses 32-bit rIP-relative
addressing to read the value of enc_bit - a variable which caches a
previously detected encryption bit position - but kexec may allocate
the early boot code to a higher location, beyond the 32-bit addressing
limit.

In this case, garbage will be read and get_sev_encryption_bit() will
return the wrong value, leading to accessing memory with the wrong
encryption setting.

Therefore, remove enc_bit, and thus get rid of the need to do 32-bit
rIP-relative addressing in the first place.

 [ bp: massage commit message heavily. ]

Fixes: 1958b5fc4010 ("x86/boot: Add early boot support when running with SEV active")
Suggested-by: Borislav Petkov <bp@...e.de>
Signed-off-by: Kairui Song <kasong@...hat.com>
Signed-off-by: Borislav Petkov <bp@...e.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@....com>
Cc: linux-kernel@...r.kernel.org
Cc: tglx@...utronix.de
Cc: mingo@...hat.com
Cc: hpa@...or.com
Cc: brijesh.singh@....com
Cc: kexec@...ts.infradead.org
Cc: dyoung@...hat.com
Cc: bhe@...hat.com
Cc: ghook@...hat.com
Link: https://lkml.kernel.org/r/20180927123845.32052-1-kasong@redhat.com
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 arch/x86/boot/compressed/mem_encrypt.S |   19 -------------------
 1 file changed, 19 deletions(-)

--- a/arch/x86/boot/compressed/mem_encrypt.S
+++ b/arch/x86/boot/compressed/mem_encrypt.S
@@ -25,20 +25,6 @@ ENTRY(get_sev_encryption_bit)
 	push	%ebx
 	push	%ecx
 	push	%edx
-	push	%edi
-
-	/*
-	 * RIP-relative addressing is needed to access the encryption bit
-	 * variable. Since we are running in 32-bit mode we need this call/pop
-	 * sequence to get the proper relative addressing.
-	 */
-	call	1f
-1:	popl	%edi
-	subl	$1b, %edi
-
-	movl	enc_bit(%edi), %eax
-	cmpl	$0, %eax
-	jge	.Lsev_exit
 
 	/* Check if running under a hypervisor */
 	movl	$1, %eax
@@ -69,15 +55,12 @@ ENTRY(get_sev_encryption_bit)
 
 	movl	%ebx, %eax
 	andl	$0x3f, %eax		/* Return the encryption bit location */
-	movl	%eax, enc_bit(%edi)
 	jmp	.Lsev_exit
 
 .Lno_sev:
 	xor	%eax, %eax
-	movl	%eax, enc_bit(%edi)
 
 .Lsev_exit:
-	pop	%edi
 	pop	%edx
 	pop	%ecx
 	pop	%ebx
@@ -113,8 +96,6 @@ ENTRY(set_sev_encryption_mask)
 ENDPROC(set_sev_encryption_mask)
 
 	.data
-enc_bit:
-	.int	0xffffffff
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 	.balign	8


Powered by blists - more mailing lists